Image
Product
Price
- NGK Laser Iridium Spark Plug
- Gap 0.044"
- Laser Iridium Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.14
- 3.5
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Service Number: Ifr6e11
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Ifr6e11
- Resistor Type: Yes
- Stock Number: 6741
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .044
- 1.1
- Ground Electrode Core Material: Nickel
- Material Grade: Iridium Platinum
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Iridium
- Skirt Length: 0.0
- Manufacturer Heat Range: 6
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 1.99
- 50.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium's density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- RECOMMENDED USAGE: Best for vehicles with OE fine wire iridium alloy plugs
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire iridium alloy center electrode provides consistent performance
- NGK Laser Iridium spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Most Laser Iridium spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
09482-00548, 1765272, 3172, 3403, 3418, 4504, 4702, 6741, 9603, 9604, 9607, 98079-56A7S, FR7DII33X , FR7KII33X , FR7LII33X, IK20TT, MD372588, PK20PR-L13...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Acura NSX | V | 2977 | 6 Cyl 3.0L | - |
- Cocoa; Fits Vehicles w/Bucket Seats
- Universal Seat Protector; Cocoa; Fits Vehicles w/Bucket Seats;
- Universal Seat Protector
- Product Attributes:
- Seat Type: Bucket Low Back
- Fabric: Polycotton
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm
-
Features:
- Universal Seat Protector
- WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra layer of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface.The Seat Protectors are made from a polycotton twill fabric that features a durable water-repellent finish that'll combat any juice box spill, cereal crumbs or pet mess! It's also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi–custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is designed to fit most bench and bucket-style front and rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible. Please note, you must have a headrest on the seatback of your vehicle for the Seat Protector to strap on to. Also, note that the on-screen color representations are not necessarily precise representations of actual product colors due to variance in monitor calibrations.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Acura NSX | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- TW sensor
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Acura NSX | V | 3179 | Manual | 6 Cyl 3.2L | - |
- This kit contains 2 universal clamps; 1 large clamp for the wide boot end and 1 small clamp for the narrow boot end (use 1 clamp kit per boot).
- This kit contains 2 universal clamps: 1 for the wide boot end and 1 for the narrow boot end (use 1 kit per boot).
- 1 large + 1 small clamp
- 1 Large + 1 Small Clamp
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Acura NSX |
- For Small End of Boot inner or outer boot
- This kit contains 2 universal clamps: 1 for the wide boot end and 1 for the narrow boot end (use 1 kit per boot).
- 1 large + 1 small clamp
- 1 Large + 1 Small Clamp
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Acura NSX | V | 3179 | Manual | 6 Cyl 3.2L | - |
- For Large End of Boot inner or outer boot
- This kit contains 2 universal clamps: 1 for the wide boot end and 1 for the narrow boot end (use 1 kit per boot).
- 1 large + 1 small clamp
- 1 Large + 1 Small Clamp
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Acura NSX | V | 3179 | Manual | 6 Cyl 3.2L | - |
- Relief pressure 16 lb
- Standard
This Part Fits the Following OEM/Substitute Numbers:
10233, 10233ST, 12R8, 1350A730, 1640162090, 1678-29300, 17167, 1793282Z00, 214301P111, 253301P000, 253303K000, 253303Z000, 253304H000, 4495805, 45137AE003, 45137AE00B, 45137AE01A, 7516...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Acura NSX | V | 2977 | 6 Cyl 3.0L | - |
- Sold In Pairs; A Series; 12.75 in. x 7.375 in.; Plain Black
- Premier Fit Splashguards; Sold In Pairs; A Series; 12.75 in. x 7.375 in.; Plain Black;
- Premier Fit Splashguards
-
Features:
- Designed To Fit Most Fender Configurations
- Popular Models And Colors Provide Maximum Coverage
- Molded To Original Equipment Specifications
- Guards Remain Flexible Down To -40F
- Will Not Crack Or Discolor
- Supplied With Installation Instructions And Mounting Hardware
- Packaged One Pair Per Display Card
- The Premier Splashguard from RoadSport(TM) is a universal fit product that comes in 3 sizes. The A-B-C sizing is designed to eliminate the need for custom fit applications and to allow you to simply select a size that best suits your style and choice of coverage. The product is sold in pairs and comes with installation hardware and instructions. Once you make your size selection, you can then choose either plain black or from a variety of decorative designs. The A-Series Premier Splashguards fit nicely on compact cars and smaller mini-vans. The B-Series Premier Splashguards generally fit well on larger cars, mid-sized vans, SUVs, Crossovers and smaller pick-up trucks. The C-Series Premier Splashguards fit well on all full size pick-up trucks, vans and SUVs.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Acura NSX | Front |
- Sold In Pairs; A Series; 12.75 in. x 7.375 in.; Plain Black
- Premier Fit Splashguards; Sold In Pairs; A Series; 12.75 in. x 7.375 in.; Plain Black;
- Premier Fit Splashguards
-
Features:
- Designed To Fit Most Fender Configurations
- Popular Models And Colors Provide Maximum Coverage
- Molded To Original Equipment Specifications
- Guards Remain Flexible Down To -40F
- Will Not Crack Or Discolor
- Supplied With Installation Instructions And Mounting Hardware
- Packaged One Pair Per Display Card
- The Premier Splashguard from RoadSport(TM) is a universal fit product that comes in 3 sizes. The A-B-C sizing is designed to eliminate the need for custom fit applications and to allow you to simply select a size that best suits your style and choice of coverage. The product is sold in pairs and comes with installation hardware and instructions. Once you make your size selection, you can then choose either plain black or from a variety of decorative designs. The A-Series Premier Splashguards fit nicely on compact cars and smaller mini-vans. The B-Series Premier Splashguards generally fit well on larger cars, mid-sized vans, SUVs, Crossovers and smaller pick-up trucks. The C-Series Premier Splashguards fit well on all full size pick-up trucks, vans and SUVs.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Acura NSX | Rear |
Showing 1 - 9 of 9 products
Loading...