Image
Product
Price
- Control Arm;
- Control Arm
-
Features:
- Control Arm
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Dodge Challenger | Front Right Lower |
- Control Arm;
- Control Arm
-
Features:
- Control Arm
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Dodge Challenger | Front Left Lower |
- B6 Performance - Suspension Shock Absorber
- If vehicle is equipped with self leveling (Nivomat) suspension the rear ride height may reduce approximately 10mm
- 46mm Monotube Shock Absorber
- B6 Performance
- Product Attributes:
- Boot Included: Black Straight
- Internal Design: Monotube
- Lower Mount Type: Eye 12.4mm
- Upper Mount Type: Stem
- Segment: Tuning
- Spring Seat Included: No
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- Improved safety and performance without the requirement of new springs (use of series spring possible)
- Optimum grip and enhanced lane stability in day to day and extreme situations
- Bilstein gas-pressure technology
- Bilstein B6 Performance dampers are a performance upgrade to OE dampers designed to be paired with the OE factory spring. These dampers offer application specific valve settings with a monotube design to bring out the best handling performance of a vehicle. Each damper is rigorously tested for quality that meets or exceeds OE standards. B6 Performance dampers will provide improved safety and handling performance with the added benefit of world-famous Bilstein quality.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
183218, 24144780, 4670 910AA, 4670910AA, 4782 712AC, 4782 712AE, 4782 714AC, 4782 714AD, 4854 510AB, 4854 510AC, 4854 579AB, 4854 581AA, 4854 581AB, 4854579AB, 4854581AA, 4854581AB, 4895 513AC, 4895 514AC...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2010 - Dodge Challenger | Rear | R/T |
- Rear Main Seal Retainer
- Product Attributes:
- Grade Type:
- Equipo Original
- Oem
- Mounting Hardware Included:
- No
- Non
- Mounting Hole Diameter:
- 0.125 In
- 0.125 In.
- Ancho (in): 9.6 In
- Mounting Hole Quantity: 7
- Finish: Natural
- Inside Diameter: 3.2
- Width (in): 9.6 In
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Color:
- Gris Metálico
- Metallic Gray
- Material Thickness: 1.5 In
- Contenidos del paquete: 1 Cubierta Del Tiempo Del Motor
- Depth:
- 2 In
- 2in
- Material:
- Aluminio
- Aluminum
- Grade Type:
-
Features:
- Direct replacement - this engine crankshaft seal retainer is designed to match the fit, function and performance of the original rear main seal retainer on specified vehicle years, makes and models
- Restores functionality - this retainer is engineered and tested to secure the rear main seal and prevent oil leaks when the original retainer is leaking or has failed from seal deterioration
- Durable construction - this retainer is made from quality materials for reliable service
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This engine crankshaft seal retainer is engineered to secure the rear main seal on specified vehicle years, makes and models, and to match the fit and function of an original retainer that is leaking or has failed due to seal deterioration.
This Part Fits the Following OEM/Substitute Numbers:
191009201, 53021335AE, 710841, JV1720
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Dodge Challenger | V | - | Rear | 8 Cyl 5.7L | 345 |
- Lower Steering Shaft
- Product Attributes:
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Color:
- Black
- Negro
- Noir
- Contenidos del paquete: 1 Eje De Dirección
- Installation Instructions Included:
- No
- Non
- Material:
- Acero
- Steel
- Mounting Hardware Included:
-
Features:
- Precise fit - this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
- Safety tested - each design meets rigorous regulatory standards to ensure driver safety in a collision
- Trustworthy performance - built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant - salt spray testing and premium coating help ensure future longevity
- This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
This Part Fits the Following OEM/Substitute Numbers:
425270, 4649123AB, 4649123AC, 4649123AD, 4649123AE, 4649123AF, 5057616AA, 5057616AB, 5057616AC, 5057616AD
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Dodge Challenger | Lower |
- 202 Degree; Includes Seal
- Thermostat; 202 Degree; Includes Seal;
- Thermostat
- Product Attributes:
- Temperature: 202° F
-
Features:
- Thermostat
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2010 - Dodge Challenger | V | 6059 | 8 Cyl 6.1L | SRT8 | 370 |
- HM Grade Direct-Fit Catalytic Converter
- Magnaflow HM Grade Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Midbed And Post Converter
- Outlet Gasket Included: No
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 2
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 26201. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2010 Chrysler 300, 2006-2010 Dodge Charger, and more, this direct-fit catalytic converter also interchanges with OE parts 4578 357AA and 4578 441AB, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
4578 357AA, 4578 441AA, 4578 441AB, 4578 445AA, 4578 467AA, 4578 467AB, 4578 935AA, 4578 935AB, 4578 935AC, 4578357AA, 4578441AB, 4578467AB, 4578935AC, 4581 745AA, 4581 745AB, 4581 745AC, 4581 745AD, 4581 745AE...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Dodge Challenger | V | 3497 | Left | 6 Cyl 3.5L | 215 |
- 160 Amps
- Premium Remanufactured
- Product Attributes:
- New or Remanufactured: Remanufactured
- Prop 65 Y/N: Y
- Pulley Included: Yes
- Fan Type: Internal
- Prop 65 Warning: Warning: Cancer And Reproductive Harm
- Amperage Rating: 160
- Regulator Type: External
- Rotation Direction: Clockwise
This Part Fits the Following OEM/Substitute Numbers:
04896805AD, 421000-0620, 421000-0621, 4896805AD, 4896805AE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Dodge Challenger | V | - | 8 Cyl 5.7L | 345 |
- NGK Standard Spark Plug
- Dual Plug; 16 Req'd Gap 0.044" Actual FCalifornia OE NICKEL plug (30,000 mi/48,000 km interval). **NOTE: FCalifornia OES now recommends IRIDIUM extended service plug.
- Standard Spark Plug
- Product Attributes:
- Center Electrode Design: Standard
- Center Electrode Insulator Tip Projection:
- 0.20
- 5.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Lzfr5c-11
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Lzfr5c-11
- Resistor Type: Yes
- Stock Number: 92174
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .044
- 1.1
- Ground Electrode Core Material: Nickel
- Material Grade: Nickel/copper
- Center Electrode Projection: Long Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 1.043
- 26.5
- Center Electrode Tip Material: Nickel
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 1.99
- 50.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- NGK's OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- NGK Standard spark plugs (in the iconic NGK 'yellow box' packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK's legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
This Part Fits the Following OEM/Substitute Numbers:
05149177AB, 446, 446C2, 5325, 6003, 92174, FR8TE2, REC12MCC4, SPLZFR5C11
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Dodge Challenger | V | - | 8 Cyl 5.7L | 345 |
- CHR Brake Code BR4
- Raybestos Element 3
- Product Attributes:
- Fitting Type, End 2: Banjo
- Gasket Or Seal Included: Yes
- Fitting Type, End 1: Female Thread - Sae
- Hose Length, Overall: 22.100
- Bracket Included: Yes
This Part Fits the Following OEM/Substitute Numbers:
150.63093, 22.4383, 5166552AA, 5290842AD, 5290842AE, BH144274, H620913
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Dodge Challenger | Front Right |
Showing 1 - 10 of 84 products
Loading...