Image
Product
Price
- Front Lower Suspension Ball Joint
- Fits OE Arm and Aftermarket Arms with Maximum Press-Fit Diameter of 1.571 (in)
- MOOG K500063 Front Lower Suspension Ball Joint for Jeep Patriot
- Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Mounting Hardware Included: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Jeep Compass | Front Lower |
- Front Lower Suspension Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces Fits OE Arm and Aftermarket Arms with Maximum Press-Fit Diameter of 1.571 (in) Original Equipment (OE) Presses In From Below Requires Replacement Joint To Be Pressed In From Above Arm
- MOOG K500063 Front Lower Suspension Ball Joint for Jeep Patriot
- Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Mounting Hardware Included: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
104500063, 1601724, 260-1724, 2601724, 410-288442, 45D2401, 46D2401A, 505-1417, 505-1417B, 5105040AA, 5105040AB, 5105040AC, 5105040AD, 5105040AE, 5105040AF, 5105040AG, 5105040AH, 5105040AI...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Jeep Compass | Front Lower |
- Suspension Control Arm And Ball Joint Assembly
- Standard Design
- Product Attributes:
- Ball Joint Included:
- Oui
- Sí
- Yes
- Control Arm Type: Casting/forged
- Grade Type:
- Reemplazo Estándar
- Standard
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Mounting Hole Diameter: 12.3
- Mounting Hole Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Articulación de rótula instalada: Sí
- Bushings Included:
- Oui
- Sí
- Yes
- Control Arm Material:
- Acero
- Steel
- Ball Joint Stud Type:
- Pinch
- Pinchar
- Control Arm Maximum Length: 237
- Grease Fitting Included:
- No
- Non
- Tipo de brazo de control: Fundición/forjado
- Adjustable:
- No
- Non
- Pre-Greased:
- Oui
- Sí
- Yes
- Ball Joint Thread Diameter: 14
- Contenidos del paquete: Conjunto De Articulación De Rótula Y Brazo De Control
- Control Arm Color:
- Black
- Negro
- Noir
- Control Arm Maximum Width: 288.5
- Ball Joint Installed:
- Oui
- Yes
- Ball Joint Included:
-
Features:
- Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed - additional coatings offer long-lasting rust and corrosion resistance
- This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
This Part Fits the Following OEM/Substitute Numbers:
1506056, 2606343, 2606343M, 507-1819, 5105040AA, 5105040AB, 5105040AC, 5105040AD, 5105040AE, 5105040AF, 5105040AG, 5105040AH, 5105040AI, 5CB25116, 5CB25233, 622.63017, 623.63017, 810-258897B...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Jeep Compass | Front Right Lower |
- Suspension Control Arm And Ball Joint Assembly
- Standard Design
- Product Attributes:
- Ball Joint Included:
- Oui
- Sí
- Yes
- Control Arm Type: Casting/forged
- Grade Type:
- Reemplazo Estándar
- Standard
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Mounting Hole Diameter: 12.3
- Mounting Hole Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Articulación de rótula instalada: Sí
- Bushings Included:
- Oui
- Sí
- Yes
- Control Arm Material:
- Acero
- Steel
- Ball Joint Stud Type:
- Pinch
- Pinchar
- Control Arm Maximum Length: 237
- Grease Fitting Included:
- No
- Non
- Tipo de brazo de control: Fundición/forjado
- Adjustable:
- No
- Non
- Pre-Greased:
- Oui
- Sí
- Yes
- Ball Joint Thread Diameter: 14
- Contenidos del paquete: Conjunto De Articulación De Rótula Y Brazo De Control
- Control Arm Color:
- Black
- Negro
- Noir
- Control Arm Maximum Width: 288.5
- Ball Joint Installed:
- Oui
- Yes
- Ball Joint Included:
-
Features:
- Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed - additional coatings offer long-lasting rust and corrosion resistance
- This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
This Part Fits the Following OEM/Substitute Numbers:
1506055, 2606342, 2606342M, 507-1818, 5105041AA, 5105041AB, 5105041AC, 5105041AD, 5105041AE, 5105041AF, 5105041AG, 5105041AH, 5105041AI, 5CB25115, 5CB25232, 622.63016, 623.63016, 810-258898B...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Jeep Compass | Front Left Lower |
- Front Lower Rearward Suspension Control Arm Bushing
- Standard Design Vertical Mount
- MOOG K200254 Front Lower Rearward Suspension Control Arm Bushing for Jeep Patriot
- Product Attributes:
- Inside Diameter: 0.550
- Material: Steel Clad Rubber
- Part Description: Suspension Control Arm Bushing
-
Features:
- HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS -- Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN -- Engineered to match or exceed OE requirements
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12200254, 2673758, 45G1395, 5105040AE, 5105041AE, 535-489, 565-1395, 602.58039, BC82090, BC82090PR, FB1081, FB200254, JBU182, K200254, MS25441, SB101, TD1987W
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Jeep Compass | Front Lower Rearward |
- Fuel Module Seal;
- Fuel Module Seal
-
Features:
- Fuel Module Seal
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Jeep Compass |
- 20" TRICO View Wiper Blade
- OE Design this is a 20'' 9 x 3 Hook Conventional Wiper Blade oe: 68003732AA; 68003738AA; 68003744AA; 68003 732AA; 68003 738AA; 68003 744AA; 68002 028AA; 68002028AA
- 9mm Hook, 9x4 Hook, 1/4" Side Lock
- TRICO View Wiper Blade
- Product Attributes:
- Salability Restrictions: N
- Number of Wiping Edges: 1
- Blade Material: Natural Rubber
- Frame Material: Steel
- AAP_UDA_4: 110
- Pressure Point Quantity: 6
- Contains Electronic Components: No
- Engine Specific: N
- AAP_UDA_129: N
- Frame Color: Black
- AAP_UDA_125: N
- AAP_UDA_126: N
- AAP_UDA_127: N
- Is Item A Chemical: No
- Blade Type: Conventional
- Adapter Type: Pre-attached Adapter
- Adapters Required: Yes
- Snowmobile: N
- Personal Watercraft: N
- Winter Blade: No
- Is Or Contains A Battery: No
- Variable Speed: No
- Shipping Exclusions: N
- ASIN Child: B00j676pny
- High Performance: Y
- Attached Spoiler/Aerofoil: No
- AAP_UDA_132: N
- California Proposition 65 Warning Type: N/a
- AAP_UDA_133: N
- Is Or Contains A Bulb: No
- Adapters Included: Yes
- Motorcycle ATV: N
- Non-Vehicle Specific: N
- AAP_UDA_130: Y
- AAP_UDA_131: N
- Wiper Blade Connection Type: 1/4 Side Lock, 7mm Hook, 8mm Hook, 9x3 Hook, 9x4 Hook
- AAP_UDA_119: Y
- Transmission Specific: N
- Refillable: Yes
- Small Engine: N
-
Features:
- Pre-attached universal adaptor fits most arm types directly
- Available in lengths from 11" to 28
- Engineered for better wrap on today's highly curved windshields
- Conventional Wiper Blade
- Precision-cut rubber edge creates superior wiping action
- Aerodynamic steel frame provides exceptional strength and durability
- TRICO View Wiper Blade feature an aerodynamic steel frame that delivers exceptional strength and durability and is engineered to provide a better wrap on today's highly curved windshields. The pre-attached universal adaptor fits 9mm hook, 9x4 hook, side lock and bayonet arms.
This Part Fits the Following OEM/Substitute Numbers:
1002737089, 36-201C, WW-2001-WT
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Jeep Compass | Front Right |
- CV Axle Assembly
- MOOG 12E003L CV Axle Assembly
- Product Attributes:
- Compressed Length:
- 25.08
- 637
- Grade Type: Premium
- Axle Nut Socket Size: 32
- Inboard Spline Quantity: 27
- ABS Tone Ring Included: No
- Outboard Boot Material: Neoprene
- Outboard Joint Type: Conventional
- Axle Nut Included: Yes
- Axle Nut Thread Size: M22×1.5
- Outboard Spline Quantity: 28
- Inboard Joint Type: Male
- Inboard Boot Material: Neoprene
- Axle Nut Type: Hex
- Compressed Length:
-
Features:
- KEEPS DIRT & MOISTURE OUT -- Durable neoprene boot keeps water and dirt out to help prevent premature failure
- ADDED RUST PROTECTION -- Specially engineered coating applied to intermediate shaft and inboard and outboard housings to inhibit premature wear caused by rain, snow, salt and road grime
- BUILT TO LAST -- Heat-treated bearings, races and housings for optimal joint function, articulation and geometry
- PRECISE FIT -- Splines ensure precise fit of the axle into the mating hub
- EVERYTHING FOR THE REPAIR -- Comes with axle nut and inboard bolts (where required)
- Backed by premium materials and rigorous testing, MOOG® CV axles deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
50852200AA, 5085220AB, 5085220AE, 663511
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Jeep Compass | Front Left |
- Front Right Lower Suspension Control Arm and Ball Joint Assembly
- Premium OE Replacement
- MOOG RK620065 Front Right Lower Suspension Control Arm and Ball Joint Assembly for Jeep Patriot
- Product Attributes:
- Ball Joint Stud Type: Pinch
- Control Arm Maximum Length: 16.210
- Grease Fitting Included: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Pre-Greased: Yes
- Ball Joint Mounting Type: Press In
- Control Arm Color: Black
- Bushings Included: Yes
- Control Arm Material: Stamped Steel
-
Features:
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot seal provides an effective barrier against wear-causing contaminants
- CARBON FIBER BEARINGS -- Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life
- GREASEABLE SOCKET -- Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants
- ADDED CORROSION PROTECTION -- Specially-engineered coatings are applied to metal surfaces to inhibit premature deterioration caused by rain, snow, salt and road grime
- HARDENDED TO MAXIMIZE STRENGTH -- Studs are induction hardened to maximize strength, resist breakage and improve fatigue life
- PREMIUM BUSHINGS -- Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
- ENHANCED STRUCTURAL STRENGTH – Material and heat treatment are carefully selected to meet application requirements
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- QUALITY ASSURANCE -- Laser-etched ID provides visible assurance of genuine MOOG quality
- HARDWARE INCLUDED -- Comes with all necessary hardware for easy, fast installation
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
This Part Fits the Following OEM/Substitute Numbers:
05105040AE, 05105040AG, 2606343, 2606343M, 41063, 45D2495, 507-1819, 5105040AA, 5105040AB, 5105040AC, 5105040AD, 5105040AE, 5105040AF, 5105040AG, 5105040AH, 5105040AI, 521-108, 521108...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Jeep Compass | Front Right Lower |
- Engine Valve Cover
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- Grommets Included:
- No
- Non
- Oil Filler Cap Included:
- No
- Non
- Hold Down Tabs Included:
- Oui
- Sí
- Yes
- Finish:
- Painted
- Pintado
- Contains Oil Baffles:
- No
- Non
- Color:
- Black
- Negro
- Noir
- Cylinder Head Type: Dohc
- Material Thickness: 10.5
- Contenidos del paquete: 1 Cubierta De La Válvula Del Motor
- Inside Clearance Height: 11
- Material:
- Plastic
- Plástico
- Valve Cover Type:
- Corto
- Short
- Mounting Hardware Included:
-
Features:
- Direct replacement - this valve cover matches the original equipment part for fit and function
- Durable construction - this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
- Cost-effective solution - offers original equipment performance at competitive price
- Quality tested - this part has undergone try-on and material testing to ensure a quality fit and reliable service
- This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.
This Part Fits the Following OEM/Substitute Numbers:
4884760AE, 4884760AF, 8456084083745403, SK4884760
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Jeep Compass | L | 1998 | 4 Cyl 2.0L | 122 |
Showing 1 - 10 of 60 products
Loading...