Shop By Product Matching "AE"
Choose your Submodel for your 2019 BMW X1
Image
Product
Price
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 215
- 8.48
- End 1 Inside Diameter:
- 1.19
- 30
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.19
- 30
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
17127617368, 51572, F11543
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2019 - BMW X1 | L | 1998 | Lower | GAS | 4 Cyl 2.0L | 122 |
- Standard Multi-Purpose Light Bulb Box of 10
- Boxed Product; Miniature Lamp
- Wagner Standard 17635 Standard Multi-Purpose Light Bulb Box of 10
- Product Attributes:
- Bulb Color: Clear
- Filament Type: C-6
- Average Rated Life: 150
- Voltage: 12.000
- Wattage: 21.000
- Filament Quantity: 1
- Amperage Rating: 1.750
- Brightness: 37.000
- Bulb Base Type: Ba15s
- Bulb Type: Miniature Lamp S-8
-
Features:
- MULTIPURPOSE LIGHTING -- Designed for wide range of interior and exterior automotive lighting applications like turn signals, taillights, brake lights and cargo lights
- BUILT TO LAST -- Continuous coil filament resists shock and vibration and improves the life of the bulb
- HIGH QUALITY -- High-grade filament and natural amber glass (application-specific) for dependable long-lasting performance
- DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
- COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture and industrial, marine and powersport applications
- Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- This item must be purchased in quantities of 10
This Part Fits the Following OEM/Substitute Numbers:
05104646AA, 101522, 1073, 12422001000, 12498, 12795072, 13503344, 13503395, 13503439, 13505766, 14148190, 153622, 160654, 1620806, 17635, 1864221008, 1864221008E, 1864221008N...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - BMW X1 |
- Standard Multi-Purpose Light Bulb Box of 10
- without Adaptive Lighting Boxed Product ; Miniature Lamp
- Wagner Standard 17635 Standard Multi-Purpose Light Bulb Box of 10
- Product Attributes:
- Bulb Color: Clear
- Filament Type: C-6
- Average Rated Life: 150
- Voltage: 12.000
- Wattage: 21.000
- Filament Quantity: 1
- Amperage Rating: 1.750
- Brightness: 37.000
- Bulb Base Type: Ba15s
- Bulb Type: Miniature Lamp S-8
-
Features:
- MULTIPURPOSE LIGHTING -- Designed for wide range of interior and exterior automotive lighting applications like turn signals, taillights, brake lights and cargo lights
- BUILT TO LAST -- Continuous coil filament resists shock and vibration and improves the life of the bulb
- HIGH QUALITY -- High-grade filament and natural amber glass (application-specific) for dependable long-lasting performance
- DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
- COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture and industrial, marine and powersport applications
- Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- This item must be purchased in quantities of 10
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - BMW X1 |
- Cocoa; Fits Vehicles w/Bucket Seats
- Universal Seat Protector; Cocoa; Fits Vehicles w/Bucket Seats;
- Universal Seat Protector
- Product Attributes:
- Seat Type: Bucket Low Back
- Fabric: Polycotton
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm
-
Features:
- Universal Seat Protector
- WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra layer of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface.The Seat Protectors are made from a polycotton twill fabric that features a durable water-repellent finish that'll combat any juice box spill, cereal crumbs or pet mess! It's also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi–custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is designed to fit most bench and bucket-style front and rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible. Please note, you must have a headrest on the seatback of your vehicle for the Seat Protector to strap on to. Also, note that the on-screen color representations are not necessarily precise representations of actual product colors due to variance in monitor calibrations.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - BMW X1 | Front |
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - BMW X1 |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - BMW X1 | Rear |
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - BMW X1 |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - BMW X1 | Front Right |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- OE Specialty Aero Twin
- 660mm/400mm
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - BMW X1 | Front |
- FloorLiner™ HP
- Black; 2 piece
- FloorLiner™ HP; Black; Rear; 2 pc.;
- FloorLiner(TM) HP
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Placement Without Any Shifting Or Sliding
- Protects The Bottom
- Front
- Back And Sides
- 100pct Recyclable Material No Latex
- PVCs
- Cadmium Or Lead
- Designed
- Engineered And Manufactured By WeatherTech In America
- Custom Fit For Your Vehicles Make And Model
- High-Walled Design Helps Contain Messes Of Any Kind
- Anti-Skid Nibs And Underside Texture Keep FloorLiner HP In Place
- Compound Wont Break Down In Extreme Weather Environments
- Tactile Feel
- WeatherTech's talented designers and engineers have taken our already advanced FloorLiner into the future! Laser measured and custom fit, FloorLiner HP is the next generation of high performance FloorLiner. Designed to protect your carpeted floors as well as the front, back and sides of your vehicle's footwell. FloorLiner HP is made using advanced rubber-like, Thermoplastic Elastomer (TPE) compound making it both soft and durable. Engineered and created to stand up to the most extreme weather conditions, it won't crack, curl or break down. This material is also 100% recyclable and is both latex and PVC-free! A specially designed retention system and non-slip nibs keep the FloorLiner HP locked in place, so there's no sliding. Its beveled edge prevents walls from curving in, for the ultimate in stability. A watertight sill around the retention clasps prevents messes from leaking onto your vehicle's interior carpet. Optimal side trim lines cut away to display the seal plate on your vehicle.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2019 - BMW X1 | Rear | sDrive28i |
Showing 1 - 10 of 11 products
Loading...