Shop By Product Matching "AE"
Choose your Submodel for your 2020 BMW X2
Image
Product
Price
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 215
- 8.48
- End 1 Inside Diameter:
- 1.19
- 30
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.19
- 30
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
17127617368, 51572, F11543
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2020 - BMW X2 | L | 1998 | Lower | GAS | 4 Cyl 2.0L | sDrive28i | 122 |
- Cocoa; Fits Vehicles w/Bucket Seats
- Universal Seat Protector; Cocoa; Fits Vehicles w/Bucket Seats;
- Universal Seat Protector
- Product Attributes:
- Seat Type: Bucket Low Back
- Fabric: Polycotton
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm
-
Features:
- Universal Seat Protector
- WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra layer of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface.The Seat Protectors are made from a polycotton twill fabric that features a durable water-repellent finish that'll combat any juice box spill, cereal crumbs or pet mess! It's also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi–custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is designed to fit most bench and bucket-style front and rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible. Please note, you must have a headrest on the seatback of your vehicle for the Seat Protector to strap on to. Also, note that the on-screen color representations are not necessarily precise representations of actual product colors due to variance in monitor calibrations.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - BMW X2 | Front |
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - BMW X2 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Insert
- Includes Gasket
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - BMW X2 |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - BMW X2 | Rear |
- Improved Design
- with M Sport Pkg Bumper Cover & Trim
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - BMW X2 | Rear |
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - BMW X2 |
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2020 - BMW X2 | Front Right | sDrive28i |
- Class 1 Trailer Hitch; 1-1/4in. Receiver; Select BMW X2
- 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight
- CURT 11530 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select BMW X2
- Class I 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 2000
- Body Shape: Square
- Install Time: 90 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/Vehicle Specific Design For Custom Fit
- Tested For Safety In Accordance w/SAE J685
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In Rust-Resistant Liquid Bonderite Coating
- Strengthened w/Cast
- Welded
- Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the BMW X2 (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - BMW X2 | Rear |
- FloorLiner™ HP
- Black; 2 piece
- FloorLiner™ HP; Black; Rear; 2 pc.;
- FloorLiner(TM) HP
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Placement Without Any Shifting Or Sliding
- Protects The Bottom
- Front
- Back And Sides
- 100pct Recyclable Material No Latex
- PVCs
- Cadmium Or Lead
- Designed
- Engineered And Manufactured By WeatherTech In America
- Custom Fit For Your Vehicles Make And Model
- High-Walled Design Helps Contain Messes Of Any Kind
- Anti-Skid Nibs And Underside Texture Keep FloorLiner HP In Place
- Compound Wont Break Down In Extreme Weather Environments
- Tactile Feel
- WeatherTech's talented designers and engineers have taken our already advanced FloorLiner into the future! Laser measured and custom fit, FloorLiner HP is the next generation of high performance FloorLiner. Designed to protect your carpeted floors as well as the front, back and sides of your vehicle's footwell. FloorLiner HP is made using advanced rubber-like, Thermoplastic Elastomer (TPE) compound making it both soft and durable. Engineered and created to stand up to the most extreme weather conditions, it won't crack, curl or break down. This material is also 100% recyclable and is both latex and PVC-free! A specially designed retention system and non-slip nibs keep the FloorLiner HP locked in place, so there's no sliding. Its beveled edge prevents walls from curving in, for the ultimate in stability. A watertight sill around the retention clasps prevents messes from leaking onto your vehicle's interior carpet. Optimal side trim lines cut away to display the seal plate on your vehicle.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2020 - BMW X2 | Rear | M35i |
Showing 1 - 10 of 12 products
Loading...