Image
Product
Price
- Champion Platinum Power - Boxed - RE14PMC
- Gap 0.040in; Plug Type RE14PMC
- Champion Platinum Power 3570 Spark Plug (Carton of 4)
- Platinum Power
- Product Attributes:
- Hex Size:
- 0.625
- 15.880
- Center Electrode Tip Material: Platinum
- Seat Type: Tapered
- Electrical Terminal Type: Non-removable Nut
- Manufacturer Heat Range: 14
- Pre-Gap Size:
- 0.045
- 1.15
- Classification: Champion Platinum Power
- Ground Electrode Core Material: Nickel
- Plug Type: Re14pmc
- Hex Size:
- Champion® Platinum Power™ spark plugs deliver powerful performance. Made from exclusive Heat-Active™ alloy, a fine-wire center electrode and V-trimmed ground electrode provides sharp spark focus.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
RE14PMC
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Chevrolet Blazer | L | 2457 | 4 Cyl 2.5L | 153 |
- NGK Laser Iridium Spark Plug
- Gap 0.036" OE Equivalent Design* 96,000 mi OE Mfr Recommended Service Interval
- Laser Iridium Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Service Number: Ilnar7a9
- Ground Electrode Tip Material: Platinum
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Ilnar7a9
- Resistor Type: Yes
- Stock Number: 92176
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .036
- 0.9
- Ground Electrode Core Material: Nickel
- Material Grade: Iridium Platinum
- Center Electrode Projection: Mid Projection
- Seat Type: Tapered
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 14mm
- Reach:
- 0.984
- 25.0
- Center Electrode Tip Material: Iridium
- Skirt Length: 0.0
- Manufacturer Heat Range: 7
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.07
- 52.5
- Thread Diameter:
- 0.472
- 12.0
-
Features:
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire iridium alloy center electrode provides consistent performance
- RECOMMENDED USAGE: Best for vehicles with OE fine wire iridium alloy plugs
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium's density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
- NGK Laser Iridium spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Most Laser Iridium spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
92176
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Chevrolet Blazer | V | - | 6 Cyl 3.6L | 222 |
- Dual-Output 7/4-Way Connector (Plugs into USCAR)
- 7-Way And 4-Way For Models w/Factory Tow Package
- CURT 55774 Dual-Output Vehicle-Side 7-Pin; 4-Pin Connectors; Factory Tow Package and USCAR Socket Required
- OEM Vehicle To Trailer Connector w/Harness
- Product Attributes:
- Output Type: 4-way Flat
- Connector Style: 7 Blade And 4 Flat
-
Features:
- Plugs Into Connector To Provide A 4-Way And 7-Way Multi-Socket
- Fits Uscar-Equipped Vehicles w/Factory Tow Plugs
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- 7-Way Round Socket Adds Reverse Lights Electric Brakes
- Dust Covers Included To Keep Connectors Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- Bracket Securely Mounts Wiring To The Vehicle Or Trailer Hitch
- Made In USA
- A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURTs custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicles electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM connector and offers a 4-way flat and 7-way RV blade connector. It comes with a mounting bracket for easy installation and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2021 - Chevrolet Blazer | True North |
- Standard Multi-Purpose Light Bulb Box of 10
- Boxed Product; Miniature Lamp
- Wagner Standard 7440 Standard Multi-Purpose Light Bulb Box of 10
- Product Attributes:
- Bulb Color: Clear
- Filament Type: C-6
- Average Rated Life: 300
- Voltage: 12.000
- Wattage: 21.000
- Filament Quantity: 1
- Amperage Rating: 1.750
- Brightness: 36.600
- Bulb Base Type: Single Contact Wedge
- Bulb Type: T-6 Bulb 3/4 (19mm) Dia
-
Features:
- MULTIPURPOSE LIGHTING -- Designed for wide range of interior and exterior automotive lighting applications like turn signals, taillights, brake lights and cargo lights
- BUILT TO LAST -- Continuous coil filament resists shock and vibration and improves the life of the bulb
- HIGH QUALITY -- High-grade filament and natural amber glass (application-specific) for dependable long-lasting performance
- DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
- COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture and industrial, marine and powersport applications
- Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- This item must be purchased in quantities of 10
This Part Fits the Following OEM/Substitute Numbers:
13503356, 13584303, 15821754, 2626189940, 2626189943, 2626189946, 2626189949, 2626189961, 2626189970, 33303S2R901, 33303S30003, 33303SL4003, 33303TZ5A01, 3M7Z13466A, 5PW833310000, 7119904756, 7119905328, 7440...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Chevrolet Blazer |
- Replacement OE 4-Way Flat Socket (T s into USCAR)
- 2-Wire System; 4-Way Flat; Packaged; Retains Use of 7 Way Round Connector For Models w/Factory Tow Package
- CURT 55384 Replacement Vehicle-Side Custom USCAR 4-Pin Trailer Wiring Harness
- Custom Wiring Connector
- Product Attributes:
- Output Type: 4-way Flat
-
Features:
- Plugs Into Socket To Add A 4-Way Flat And Retain Use Of 7-Way
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Dust Cover Included To Keep Connector Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- Backed By A Limited One-Year Warranty
- Made In USA
- Stress is the last thing you should feel when towing a trailer -- whether youre hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it. CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Though this special socket is not equipped on every vehicle, a CURT custom wiring connector (also called a T-connector) utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicles wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular connector provides a 4-way flat socket while retaining use of the existing OEM 7-way. It is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle). It comes with a dust cover to keep the connector socket clean when not in use.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2021 - Chevrolet Blazer | True North |
- Cocoa; Fits Vehicles w/Bucket Seats w/Bucket Seating
- Universal Seat Protector; Cocoa; Fits Vehicles w/Bucket Seats;
- Universal Seat Protector
- Product Attributes:
- Seat Type: Bucket Low Back
- Fabric: Polycotton
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm
-
Features:
- Universal Seat Protector
- WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra layer of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface.The Seat Protectors are made from a polycotton twill fabric that features a durable water-repellent finish that'll combat any juice box spill, cereal crumbs or pet mess! It's also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi–custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is designed to fit most bench and bucket-style front and rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible. Please note, you must have a headrest on the seatback of your vehicle for the Seat Protector to strap on to. Also, note that the on-screen color representations are not necessarily precise representations of actual product colors due to variance in monitor calibrations.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Chevrolet Blazer | Front |
- Aeroskin Hood Protector; Smoke
- Aeroskin Hood Protector - Smoke
- Product Attributes:
- CA Prop 65 Type: Cancer And Reproductive
- CA Prop 65: Y
- Category: Hood Shields
- Prop 65 Short Label Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Requires Drilling: No
-
Features:
- The Husky Aeroskin® is constructed with nail-tough acrylic for unstoppable protection your can count on.
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Husky Aeroskin® gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Mounts in minutes with 3M™ automotive-grade adhesive tape (included).
- Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin® Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M™ automotive-grade adhesive, protects for life. Available in dark smoke finish and proudly made in the USA with global materials.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2021 - Chevrolet Blazer | United States |
- Replacement OE 5-Way Flat Socket (Plugs into USCAR)
- 2-Wire System; 5-Way Flat For Models w/Factory Tow Package
- CURT 56515 Replacement Vehicle-Side 5-Pin Connector; Factory Tow Package and USCAR Socket Required
- Custom Wiring Connector
- Product Attributes:
- Output Type: 5-way Flat
-
Features:
- Plugs Into Existing Vehicle Socket To Provide 5-Way Flat Socket
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 5-Way Flat Connects Tail Lights Brake Lights Turn Signals
- Dust Cover Included To Keep Connector Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- Backed By A Limited One-Year Warranty
- Made In USA
- A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURTs custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicles electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This custom wiring connector provides a 5-way flat connector socket and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2021 - Chevrolet Blazer | True North |
- Aeroskin Hood Protector; Smoke
- Aeroskin Hood Protector - Smoke
- Product Attributes:
- Mounting Hardware Included: Yes
- WEB: Style: Low Profile
- WEB: Color: Smoke
- WEB: Material: Modified Acrylic
- Prop 65 Short Form Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Available in nail-tough acrylic or impact-resistant ABS plastic (depending on finish).
- Choose dark smoke, matte black, or chrome finish.
- The lowest profile protection available for that sleek, custom touch.
- Custom-molded to match the contours of your hood. Instantly adds a custom look to your ride.
- Mounts in minutes with 3M automotive grade adhesive mounting tape (included).
- Made in the USA with global materials.
- Put the first name in low-profile hood protection to work at the front of your rig. The AVS Aeroskin® keeps bugs, dirt and debris off your paint and out of your way while adding that better-than-factory custom touch. Built from high-quality ABS impact-resistant acrylic available in dark smoke finish, matte black or chrome. Custom molded to the contours of your vehicle to fit better and last longer. Its simple, no-drill installation with 3M automotive-grade adhesive tape gets your car, truck, van or SUV fully protected, looking good, and back on the road in no time. Proudly made in the USA with global materials.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2021 - Chevrolet Blazer | United States |
- Aeroskin Hood Protector; Chrome
- Aeroskin Hood Protector - Chrome
- Product Attributes:
- Mounting Hardware Included: Yes
- WEB: Style: Low Profile
- WEB: Color: Chrome
- WEB: Material: Thermoplastic Abs
- Prop 65 Short Form Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Available in nail-tough acrylic or impact-resistant ABS plastic (depending on finish).
- Choose dark smoke, matte black, or chrome finish.
- The lowest profile protection available for that sleek, custom touch.
- Custom-molded to match the contours of your hood. Instantly adds a custom look to your ride.
- Mounts in minutes with 3M automotive grade adhesive mounting tape (included).
- Made in the USA with global materials.
- Put the first name in low-profile hood protection to work at the front of your rig. The AVS Aeroskin® keeps bugs, dirt and debris off your paint and out of your way while adding that better-than-factory custom touch. Built from high-quality ABS impact-resistant acrylic available in dark smoke finish, matte black or chrome. Custom molded to the contours of your vehicle to fit better and last longer. Its simple, no-drill installation with 3M automotive-grade adhesive tape gets your car, truck, van or SUV fully protected, looking good, and back on the road in no time. Proudly made in the USA with global materials.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2021 - Chevrolet Blazer | United States |
Showing 1 - 10 of 12 products
Loading...