Shop By Product Matching "AE"
Choose your Submodel for your 2023 Jeep Wrangler
Image
Product
Price
- Rear Sway Bar Kit
- 7/8" Rear Sway Bar Jeep 18-23 Wrangler JL
- Product Attributes:
- Grade Type: Performance
- For your money, the best aftermarket investment you can make! Hellwig Sway Bars are an extremely effective handling upgrade you can make to your vehicle. Hellwig sway bars offer quick bolt on installation that are engineered to perform. An immediate improvement will be felt when you drive through the first corner with a Hellwig sway bar installed. Though most vehicles come equipped with factory installed sway bars, they are often insufficient for today's load and tow demands. Hellwig sway bars feature larger than stock diameters and precision engineered components to optimize handling and reduce body roll.
Additional Fitment Information:
| Vehicle | Doors | Manuf. Body Code | Body |
|---|---|---|---|
| 2023 - Jeep Wrangler | 2 | JL | Sport Utility |
- With Step Pads 4 In Oval Straight Powder Coated Black Mild Steel With Welded End
- With Step Pads 4 Inch Oval Straight Powder Coated Black Mild Steel With Welded End Caps Rocker Panel Mount
- TFX 4" Oval Tube Side Steps
- Product Attributes:
- Step Type: With Step Pads
- Mounting Location: Rocker Panel
- Color/ Finish: Black Powder Coated
- Prop 65 Y/N: Y
- End Cap Type: Welded End Caps
- Type: Oval Straight
- Material: Mild Steel
-
Features:
- Rocker Panel Mount
- Black Powder Coated Bars Constructed From Quality Steel
- Slip Resistant Step Pads Will Not Fade Or Crack
- Provides A Sleek Look With An Extra Wide Step Area For Better Footing
- Limited 3 Year Warranty
- The 4 Inch oval step bar provides a sleek look with an extra wide step area for better footing. Weight capacity of 300 Pounds.
Additional Fitment Information:
| Vehicle | Doors |
|---|---|
| 2023 - Jeep Wrangler | 4 |
- With Step Pads 4 In Oval Straight Powder Coated Black Mild Steel With Welded End
- With Step Pads 4 Inch Oval Straight Powder Coated Black Mild Steel With Welded End Caps Rocker Panel Mount
- TFX 4" Oval Tube Side Steps
- Product Attributes:
- Step Type: With Step Pads
- Mounting Location: Rocker Panel
- Color/ Finish: Black Powder Coated
- Prop 65 Y/N: Y
- End Cap Type: Welded End Caps
- Type: Oval Straight
- Material: Mild Steel
-
Features:
- Rocker Panel Mount
- Black Powder Coated Bars Constructed From Quality Steel
- Slip Resistant Step Pads Will Not Fade Or Crack
- Provides A Sleek Look With An Extra Wide Step Area For Better Footing
- Limited 3 Year Warranty
- The 4 Inch oval step bar provides a sleek look with an extra wide step area for better footing. Weight capacity of 300 Pounds.
Additional Fitment Information:
| Vehicle | Doors |
|---|---|
| 2023 - Jeep Wrangler | 4 |
- Steering Drag Link
- MOOG DS300091 Steering Drag Link for Jeep Wrangler
- Product Attributes:
- Mounting Hardware Included: Yes
- Stud Thread Diameter: 14
- Type: Bent
- Greaseable: Yes
- Material: Forged Steel
- Part Description: Steering Drag Link
- Length - Stud Center to End:
- 220.47
- 8.68
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- ENGINEERING EXCELLENCE -- With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
- Backed by superior materials and rigorous testing, the MOOG drag link assembly delivers reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
68258760AA, 68258760AB, 68258760AC, 68258760AD, 68258760AE, MS25739, TXMS25739
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Jeep Wrangler | At Pitman Arm |
- Spark Plug Iridium Power
- Gap 0.035 Iridium Power Performance Upgrade With World's Smallest Center Electrode (0.4 mm Dia.) & Tapered Tip Patented U-Groove Design & Patented Ir Alloy (90% Ir)
- Spark Plug Iridium Power
- Spark Plug - Iridium Power
- Product Attributes:
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Center Electrode Core Material: Copper
- Hex Size: 16
- Reach: 26.5
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Tapercut, U-groove
- Ground Configuration: Standard
- Pre-Gap Size: 0.9
- Resistance: 5000.0
- Ground Electrode Core Material: Nickel
- Thread Diameter: 12.0
- Increased performance with World's smallest Iridium Center Eletrode (0.4mm).
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
This Part Fits the Following OEM/Substitute Numbers:
101 905 622, 12290-R40-A01, 12290-R40-A02, 12290-R70-A01, 12290-R70-A02, 18846-11070, 18847-08220, 1884708220, 18849-09070, 18849-09085, 18849-11070, 18869-09095, 5149 125AE, 5356, 6822 5755AA, 7B0 905 600 A, 955 170 220 90, IXUH22I...VIEW MORE
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2023 - Jeep Wrangler | Freedom |
- Dual Steering Dampers Requires at least 2.0 (in) tall front bump stop spacers Requires at least a 2.0 (in) suspension lift to use. Must Use with RS64102 Mounting Kit
- RS5000
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
52060058AD, 52060058AE, 52060058AF, 52060059AE, 5C3Z3E651B, 5C3Z3E651BA, 5C3Z3E651C, 5C3Z3E651CA, 68251580AC, 68251580AE, 8C3Z3E651A, 8C3Z3E651D, 8C3Z3E651E, BC3Z3E651A, BC3Z3E651B, HC3Z3E651A, HC3Z3E651B, HC3Z3E651C...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Jeep Wrangler | Front |
- NGK MOD High-Performance Coil Multi-Pack (Qty 8)
- Twin Spark Ignition System; 1 Coil Fires 2 Plugs (1 Multi-Pack of 8 Required)
- NGK MOD High-Performance Ignition Coil Multi-Pack
- Product Attributes:
- Connector Gender: Female
- Voltage: 12.0
- Grade Type: Performance
- Mounting Hardware Included: No
- Connector Quantity: 1
- Part Number: M5121-8
- Mounting Hole Quantity: 2
- Coil Type: Cop (coil On Plug)
- Terminal Quantity: 3
- Ignition Type: Distributorless
- Stock Number: 49469
- Color: Silver
- Oil Filled: No
- Terminal Type: Blade
- Terminal Gender: Male
-
Features:
- PRODUCT ENGINEERING: Advanced stress modeling systems preemptively identify and avoid common failure points found in competitor performance coils
- EASE OF INSTALLATION: NGK MOD Ignition Coils include ignition control module, premium high temperature coil boot, and hardware where required
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements, NGK’s MOD coils deliver maximum performance
- BEYOND OE QUALITY: PET housings, premium vacuum-sealed epoxy resin, and high temperature boots provide maximum levels of durability
- EXTENSIVE TESTING: NGK MOD Ignition Coils must pass extreme testing during manufacturing to meet the highest quality and durability standards
- HIGH PERFORMANCE: NGK MOD Ignition Coils utilize custom primary and secondary windings for increased output and performance
- NGK’s MOD high-performance ignition coils are designed and built for enthusiast and performance vehicles. Custom primary and secondary windings increase output for optimized performance. NGK MOD ignition coils utilize PET housings, premium vacuum-sealed epoxy resin, and high temperature silicone COP boots to provide maximum levels of dielectric strength, voltage insulation, and durability. All NGK Coils are engineered to optimum performance when paired with NGK Spark Plugs. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK's MOD coil designs will outperform all others - far beyond the operational environments a vehicle would actually experience.
This Part Fits the Following OEM/Substitute Numbers:
2505-302202, 36-8121, 49469, E1004, GN10352, IC584, UF-504, UF504
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Jeep Wrangler | V | 6424 | 8 Cyl 6.4L | 392 |
- Dual-Output 7/4-Way Connector (Plugs into USCAR)
- 7-Way And 4-Way
- CURT 55774 Dual-Output Vehicle-Side 7-Pin; 4-Pin Connectors; Factory Tow Package and USCAR Socket Required
- OEM Vehicle To Trailer Connector w/Harness
- Product Attributes:
- Output Type: 4-way Flat
- Connector Style: 7 Blade And 4 Flat
-
Features:
- Plugs Into Connector To Provide A 4-Way And 7-Way Multi-Socket
- Fits Uscar-Equipped Vehicles w/Factory Tow Plugs
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- 7-Way Round Socket Adds Reverse Lights Electric Brakes
- Dust Covers Included To Keep Connectors Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- Bracket Securely Mounts Wiring To The Vehicle Or Trailer Hitch
- Made In USA
- A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURTs custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicles electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM connector and offers a 4-way flat and 7-way RV blade connector. It comes with a mounting bracket for easy installation and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2023 - Jeep Wrangler | Unlimited Willys 4xe |
- Aluminum Oil Filter Housing Kit, Fits 3.6L/3.2L Pentastar 2011-2017
- Aluminum Oil Filter Housing Kit, Fits 3.6L/3.2L Pentastar 2011-2017
- Product Attributes:
- SellingPoint04: Helps Prevent Hard-to-diagnose And Potentially Costly Oil Leaks
- SellingPoint05: Includes New, Pre-installed Oil Pressure And Temperature Sensors
- SellingPoint06: Upgraded Viton Seals Resist Fuel And Oil For Extended Service Life
- TechSpec Overall Length (in): 15
- SellingPoint07: Mishimoto Lifetime Warranty
- SellingPoint01: Fits 3.6l/3.2l Pentastar Engines Found In Many Jeep, Chrysler, And Dodge/ram Vehicles
- SellingPoint02: All-aluminum Housing Won't Crack Or Split Like Stock Plastic
- SellingPoint03: Includes New Oil Filter, Filter Cap, Intake Manifold Gaskets, Oil Seals, And Bolts For A One-stop Solution
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Outlet: N/a
- TechSpec Core Height (in): 2.32
- TechSpec Core Thickness (in): 2.02
- Installation Difficulty: 3
- SellingPoint10: N/a
- TechSpec Note: Replaces Oe Part Numbers: 5184294ac, 5184294ad, 5184294ae, 5184304ae, 5184304af, 68105583aa, 68105583ab, 68105583ac, 68105583ad, 68105583ae, 68105583af, 68105583ag, 68308741aa, 68308741ab, 68308741ac, 68308741af, 68310865aa, 68310865ab, 68310865ac, 683108
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: Pentastar
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 5.3
- TechSpec Fluid Capacity (qts): N/a
- TechSpec Caution: To Avoid Damage, This Vehicle Must Use A Filter For 2014+ Vehicles. Oem Part Number 68191349ac Or Equivalent.
- TechSpec Applications: 2011-2017 Chrysler 200 3.6l V6--2011-2017 Chrysler 300 3.6l V6--2014-2016 Chrysler Town & Country 3.6l V6--2011-2014 Dodge Avenger 3.6l V6--2011-2017 Dodge Challenger 3.6l V6--2011-2017 Dodge Charger 3.6l V6--2011-2015 Dodge Durango 3.6l V6--2011-2017 Dod
- TechSpec Includes: (1) Oil Filter Housing--(1) Heat Exchanger--(1) Oil Filter Cap--(1) Oil Filter--(1) Oil Temperature Sensor--(1) Oil Pressure Sensor--(6) Gaskets--(1) Hardware Pack--mishimoto Lifetime Warranty
- TechSpec Inlet: N/a
- TechSpec Core Construction: Stacked Plate
- TechSpec Overall Width (in): 4
- but they're not without their flaws.----The stock 3.6 oil filter housing is made from plastic and is known to become brittle after repeated heat cycles. When that happens, even the slightest amount of torque on the filter cap while performing an oil change can be enough to crack the housing and cause significant oil leaks. To make matters worse, the oil filter housing lives underneath the intake manifold, making it difficult to identify and diagnose the leak. Oil running down the back of the engine can look like a failed rear-main seal and end up costing you thousands in parts and labor, only to have the problem continue. Luckily, Mishimoto offers a solution to prevent the headache of chasing down oil leaks and give you peace of mind.----Our all-aluminum 3.6/3.2L Pentastar oil filter housing kit is a complete safeguard against frustrating oil leaks. As the name suggests, our oil filter housing swaps the stock brittle plastic for a robust aluminum replacement. This housing is significantly stronger than the stock polymer version and won't become brittle over time. We've also upgraded the seals to Viton for improved oil and fuel resistance, ensuring a long service life. This complete kit includes the aluminum housing, oil filter, filter cap, intake manifold gaskets, filter housing seals, heat exchanger, oil temp and pressure sensors, and bolts, making it a one-stop solution for your Pentastar. Like all Mishimoto products, this 3.6L/3.2L Pentastar aluminum oil filter housing kit is backed by our Mishimoto Lifetime Warranty, for a lifetime of leak-free reliability.
This Part Fits the Following OEM/Substitute Numbers:
5184294AC, 5184294AD, 5184294AE, 5184304AE, 5184304AF, 68105583AA, 68105583AB, 68105583AC, 68105583AD, 68105583AE, 68105583AF, 68105583AG, 68308741AA, 68308741AB, 68308741AC, 68308741AF, 68310865AA, 68310865AB...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine Version | CID |
|---|---|---|---|---|---|---|
| 2023 - Jeep Wrangler | V | 3604 | 6 Cyl 3.6L | Unlimited Sport Altitude | Pentastar | 220 |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Jeep Wrangler | Front |
Showing 1 - 10 of 62 products
Loading...