Shop By Product Matching "AMO"
Choose your Submodel for your 2003 Toyota Tacoma
Image
Product
Price
- 1984-1985 Toyota 4Runner 4wd (w/3in. Rear suspension lift)-Rear SX8000 Nitro Gas
- Recomm. For Use w/3.5 in. Stock Blks; Veh. w/2 in. Stock Blocks May Req.Add Lift In Of Veh.; Includes Multi-Fit Hdwr. Pk.; 2 Req.;w/3 - 5 in. Lift; 4 PN[SB34] Are Required For Rear Pair Of Shocks Purchased w/o Tuff Lift Kit
- Tuff Country EZ-Ride s SX8000 Nitro Gas shock absorbers are recommended for all full-size applications. The nitrogen gas pressure reduces fading and gives quicker shock response.
- SX8000 Shock Absorber
- Product Attributes:
- Collapsed Length: Oem
- Upper Mount Type: N/a
- Shock Stroke: Oem
- WARNING CA Proposition 65: Yes
- Extended Length: Oem
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
-
Features:
- Ideal For Lifted Full Size Trucks And SUVs
- Nitro Gas Charged To Limit Fading
- Polyurethane Bushings
- Twin Tube Construction
- Limited Lifetime Warranty
- 5/8 in. Piston Rod
- Quicker Shock Response
- Shock Boots Sold Separately
- Tuff Country EZ-Ride's SX8000 Nitro Gas shock absorbers are recommended for all full-size applications. The nitrogen gas pressure reduces fading and gives quicker shock response.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2003 - Toyota Tacoma | Rear | Base | 4WD |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- This is the lower vibration insulator
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2003 - Toyota Tacoma | V | 3378 | Lower | 6 Cyl 3.4L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2003 - Toyota Tacoma | L | 2694 | Lower | 4 Cyl 2.7L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2003 - Toyota Tacoma | L | 2694 | Lower | 4 Cyl 2.7L | - |
- Used with 0" to 1.5" Lift Except 5 Lug Models
- ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Shocks are vehicle specific, 100% rebuildable, and 100% revalveable.
- 96-04 TACOMA 4WD 0-1.5" REAR 2.0 VS NR
- Product Attributes:
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252004 - Economy Needle Charging Tool
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: No
- Cylinder Finish: Anodized
- Upper Mount Type: Eyelet
- Configuration: Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Center Of Eyelet
- Dust Boot Included: No
- External Reservoir: No
- Remote Reservoir: No
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: No
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Internal Construction Type: Single Tube
- Cylinder Material: Aluminum
- California Prop 65 Warning: Yes
- Boot Included: No
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 1.5
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Toyota Tacoma | Rear |
- 0" - 3" Lift Except Models with 5 Wheel Lugs Requires Aftermarket front Upper Control Arms
- 1996-2004 TACOMA EXT TRAVEL 2.5 VS REMOTE RESERVOIR CDCV COILOVER KIT
- 96-04 TACOMA EXT TRAVEL 2.5 VS RR CDCV COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: Yes
- Material: Aluminum
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- 611019 - Coilover Hardware Kit Pair
- 611067 - Tacoma/fj/4rnr Lower Co Brg/spcr Kit
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Toyota Tacoma | Front |
- Used with 0" to 1.5" Lift Except 5 Lug Models
- ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved performance. These shocks feature remote reservoirs, are vehicle specific, 100% rebuildable/revalveable.
- 96-04 TACOMA 4WD 0-1.5" REAR 2.0 VS RR
- Product Attributes:
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: No
- Cylinder Finish: Anodized
- Upper Mount Type: Eyelet
- Configuration: Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Center Of Eylet
- Dust Boot Included: No
- External Reservoir: Yes
- Remote Reservoir: Yes
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Internal Construction Type: Single Tube
- Cylinder Material: Aluminum
- California Prop 65 Warning: Yes
- Boot Included: No
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 1.5
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with remote reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- Application-specific reservoir mounting hardware
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Toyota Tacoma | Rear |
- 0" - 3" Lift Except 5 Lug Models
- 1996-2004 TACOMA/1996-2002 4RUNNER 2.5 VS IR COILOVER KIT
- 96-04 TACOMA/96-02 4RUNNER 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: No
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- 611019 - Coilover Hardware Kit Pair
- 611067 - Tacoma/fj/4rnr Lower Co Brg/spcr Kit
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Spring Rate: 650
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: No
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Adjustable ride height from 0" - 3
- Race shock piston with flutter stack compression valving
- Cad-plated threaded body
- Billet aluminum upper mount
- 5/8" PTFE-lined spherical bearings
- Completely re-buildable
- 2.5" shock diameter to prevent overheating
- Chrome-silicon spring
- 250 PSI nitrogen-charged internal reservoir
- These adjustable coil-over shocks have proven their strength and longevity for years on end and they keep going. These shocks offer the best ride quality and handling. They increase suspension travel and dramatically increase the capabilities of your Tacoma or 4Runner's front suspension. These are a Race-Proven shock designed for the daily driver and the avid off-roader all in one!
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Toyota Tacoma | Front |
- 0 (in) - 3 (in) Lift
- 1996-2004 TACOMA/1996-2002 4RUNNER 2.5 VS IR COILOVER KIT
- 96-04 TACOMA/96-02 4RUNNER 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: No
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- 611019 - Coilover Hardware Kit Pair
- 611067 - Tacoma/fj/4rnr Lower Co Brg/spcr Kit
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Spring Rate: 650
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: No
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Adjustable ride height from 0" - 3
- Race shock piston with flutter stack compression valving
- Cad-plated threaded body
- Billet aluminum upper mount
- 5/8" PTFE-lined spherical bearings
- Completely re-buildable
- 2.5" shock diameter to prevent overheating
- Chrome-silicon spring
- 250 PSI nitrogen-charged internal reservoir
- These adjustable coil-over shocks have proven their strength and longevity for years on end and they keep going. These shocks offer the best ride quality and handling. They increase suspension travel and dramatically increase the capabilities of your Tacoma or 4Runner's front suspension. These are a Race-Proven shock designed for the daily driver and the avid off-roader all in one!
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2003 - Toyota Tacoma | Front | 4WD |
- 0 (in) - 3 (in) Lift Requires Aftermarket front Upper Control Arms
- 1996-2004 TACOMA EXT TRAVEL 2.5 VS REMOTE RESERVOIR CDCV COILOVER KIT
- 96-04 TACOMA EXT TRAVEL 2.5 VS RR CDCV COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: Yes
- Material: Aluminum
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- 611019 - Coilover Hardware Kit Pair
- 611067 - Tacoma/fj/4rnr Lower Co Brg/spcr Kit
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2003 - Toyota Tacoma | Front | 4WD |
Showing 1 - 10 of 12 products
Loading...