Shop By Product Matching "AMO"
Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- This is the lower vibration insulator Black.
- Lower
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Lexus GX470 | Lower |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Grommet; usually on the upper portion of the injector.
- Grommet
- Upper
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Lexus GX470 | Upper |
- 07-14 FJ/03-24 4RNR/03-23 GX 1-3" REAR 2.0 VS IR
- Used with 1" to 3" Lift Requires ICON Rear Coil Conversion Kit Part # 56110
- ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Shocks are vehicle specific, 100% rebuildable, and 100% revalveable.
- 07-UP FJ/03-UP 4RNR/03-UP GX 1-3" REAR 2.0 VS IR
- Product Attributes:
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Dust Shield Material: Rubber
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252004 - Economy Needle Charging Tool
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: Yes
- Cylinder Finish: Anodized
- Upper Mount Type: Stem
- Configuration:
- One Piece
- Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: Yes
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Dust Boot Included: Yes
- External Reservoir: No
- Remote Reservoir: No
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Internal Construction Type: Single Tube
- Cylinder Material: Aluminum
- California Prop 65 Warning: Yes
- Boot Included: Yes
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 3
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective suspension upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Lexus GX470 | Rear |
- Except KDSS Equipped Requires ICON S2 Shock Hoop Kit (Part # 56102) and S2 Skid Plate Kit (Part # 56101)
- ICON VS 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. They feature remote reservoirs, damping adjustability, and are 100% rebuildable/revalveable.
- TOYOTA S2 SECONDARY 2.5 RR CDCV PAIR
- Product Attributes:
- AAP_UDA_22: 1
- Cylinder Color:
- Grey
- Silver
- Grade Type: Performance
- Mounting Hardware Included: Yes
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: Yes
- Adjustable: Yes
- Bore Diameter: 2.25
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257339 - 7/8 Shaft 13.25 Oal, 9.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Upper Mount Type: Eyelet
- Tube Outside Diameter: 2.5
- Gas Charged: Yes
- Cylinder Material:
- Aluminum
- Steel
- Shaft Material: Chrome
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Manual
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Shock Absorber Body End Measuring Point: Center Of Eylet
- Cylinder Diameter: 2.5
- External Reservoir: Yes
-
Features:
- Nitrogen charged monotube design with remote reservoir
- Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
- ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob
- 6061 aircraft grade aluminum CNC machined components
- One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 7/8” diameter induction hardened, chrome plated shock shaft
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- PTFE lined spherical bearings and application specific mounting hardware
- 100% Rebuildable
- 100% Revalveable
- ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. If you are looking for a more user defined tune, consider looking into the Omega Series bypass shocks.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Lexus GX470 | Front |
- 0 (in) - 3.5 (in) Lift Requires Aftermarket front Upper Control Arms
- Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial rate for superb on-road comfort and a firmer secondary rate that delivers excellent bottoming resistance and superior off-road performance.
- 07-09 FJ/03-09 4RNR/03-09 GX EXT TRAVEL 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: No
- Material: Aluminum
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- 611019 - Coilover Hardware Kit Pair
- 611067 - Tacoma/fj/4rnr Lower Co Brg/spcr Kit
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Spring Rate: 650
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: No
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Adjustable coilovers yield 0-3.5" of front lift height
- Increased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use
- Extended Travel length requires installation of aftermarket front upper control arms
- Superior low speed control reduces body roll and increases on-road stability
- High quality ICON-engineered coil springs are guaranteed for life against sagging or breakage
- Corrosion resistant CAD plated shock body with 7/8" shaft
- FK Rod End bearings provide extended longevity and minimal deflection
- Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life
- Bolt-in design makes for an easy install into OEM shock location
- ICON's Vehicle Specific (V.S.) 2.5 Series coilover shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. These extended length versions offer increased wheel travel but also require the installation of aftermarket upper control arms in conjunction with the coilovers. Like all ICON shock absorbers, V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Lexus GX470 | Front |
- 0 (in) - 3.5 (in) Lift Requires Aftermarket front Upper Control Arms
- Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial rate for superb on-road comfort and a firmer secondary rate that delivers excellent bottoming resistance and superior off-road performance.
- 07-09 FJ/03-09 4RNR/03-09 GX EXT TRAVEL 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: No
- Material: Aluminum
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- 611019 - Coilover Hardware Kit Pair
- 611067 - Tacoma/fj/4rnr Lower Co Brg/spcr Kit
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Spring Rate: 650
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: No
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Adjustable coilovers yield 0-3.5" of front lift height
- Increased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use
- Extended Travel length requires installation of aftermarket front upper control arms
- Superior low speed control reduces body roll and increases on-road stability
- High quality ICON-engineered coil springs are guaranteed for life against sagging or breakage
- Corrosion resistant CAD plated shock body with 7/8" shaft
- FK Rod End bearings provide extended longevity and minimal deflection
- Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life
- Bolt-in design makes for an easy install into OEM shock location
- ICON's Vehicle Specific (V.S.) 2.5 Series coilover shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. These extended length versions offer increased wheel travel but also require the installation of aftermarket upper control arms in conjunction with the coilovers. Like all ICON shock absorbers, V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Lexus GX470 | Front |
- 07-14 FJ/03-24 4RUNNER/05-23 TACOMA S2 SHOCK HOOP KIT
- Except KDSS Equipped Models Requires ICON Skid Plate Part # 56101 to Complete System
- The S2 Modular Performance shock system utilizes the factory lower control arm and maintains OE track width while providing the ability to bolt on a secondary from shock aborber for addition shock damping.
- 07-UP FJ/03-UP 4RUNNER/05-UP TACOMA S2 SHOCK HOOP KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Material: Dom Steel
- California Prop 65 Warning: Yes
-
Features:
- Does not require welding to the frame
- Retains robust factory bumpstops
- Does not require aftermarket lower control arms
- Can be purchased in stages
- Simple installation
- Lifetime Warranty on fabricated and machined parts
- The modular aspect of this system allows for modifications to the vehicle to be achieved in stages, so the user can build their vehicle as desired rather than all at once. Multiple secondary shock options provides even further tuneabity of the system as a whole, as ICON 2.5” Remote Reservoir Shocks, 2.5” Remote Reservoir CDC Valve Shocks, or 2.5” Two-Tube Bypasses may be used to attain any level of performance desired.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Lexus GX470 | Front |
- 07-14 FJ/03-24 4RNR/03-23 GX 1-3" REAR 2.5 VS RR CDCV PAIR
- Used with 1" to 3" Lift Requires ICON Rear Coil Conversion Kit Part # 56110
- ICON VS 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. They feature remote reservoirs, damping adjustability, and are 100% rebuildable/revalveable.
- 07-UP FJ/03-UP 4RNR/03-UP GX 1-3" REAR 2.5 VS RR CDCV PAIR
- Product Attributes:
- AAP_UDA_22: 1
- Cylinder Color:
- Gray
- Silver
- Grade Type: Performance
- Mounting Hardware Included: Yes
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: Yes
- Adjustable: Yes
- Bore Diameter: 2.25
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257339 - 7/8 Shaft 13.25 Oal, 9.00 Travel
- 611007 - 9/16 Medium Duty Stem Bushing Kit
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Upper Mount Type: Stem
- Tube Outside Diameter: 2.5
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Shaft Material: Chrome
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Manual
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Cylinder Diameter: 2.5
- External Reservoir: Yes
-
Features:
- ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with piggyback reservoir
- One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 7/8” diameter induction hardened, chrome plated shock shaft
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- 100% Rebuildable
- 100% Revalveable
- ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. If you are looking for a more user defined tune, consider looking into the Omega Series bypass shocks.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Lexus GX470 | Rear |
Showing 1 - 8 of 8 products
Loading...