Image
Product
Price
- 2011-2019 Chevy Silverado 2500HD 4x4 (w/0in. to 5in. Rear suspension lift)-Rear
- 2 Required;w/2 - 3 in. Lift;
- Tuff Country EZ-Ride s SX8000 Nitro Gas shock absorbers are recommended for all full-size applications. The nitrogen gas pressure reduces fading and gives quicker shock response.
- SX8000 Shock Absorber
- Product Attributes:
- Collapsed Length: Oem
- Shock Stroke: Oem
- WARNING CA Proposition 65: Yes
- Extended Length: Oem
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
-
Features:
- Ideal For Lifted Full Size Trucks And SUVs
- Nitro Gas Charged To Limit Fading
- Polyurethane Bushings
- Twin Tube Construction
- Limited Lifetime Warranty
- 5/8 in. Piston Rod
- Quicker Shock Response
- Shock Boots Sold Separately
- Tuff Country EZ-Ride's SX8000 Nitro Gas shock absorbers are recommended for all full-size applications. The nitrogen gas pressure reduces fading and gives quicker shock response.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2016 - Ford F-150 | Front | 4WD |
- 2011-2019 Chevy Silverado 2500HD 4x4 (w/0in. to 5in. Rear suspension lift)-Rear
- 2 Required;w/2 in. Lift;
- Tuff Country EZ-Ride s SX8000 Nitro Gas shock absorbers are recommended for all full-size applications. The nitrogen gas pressure reduces fading and gives quicker shock response.
- SX8000 Shock Absorber
- Product Attributes:
- Collapsed Length: Oem
- Shock Stroke: Oem
- WARNING CA Proposition 65: Yes
- Extended Length: Oem
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
-
Features:
- Ideal For Lifted Full Size Trucks And SUVs
- Nitro Gas Charged To Limit Fading
- Polyurethane Bushings
- Twin Tube Construction
- Limited Lifetime Warranty
- 5/8 in. Piston Rod
- Quicker Shock Response
- Shock Boots Sold Separately
- Tuff Country EZ-Ride's SX8000 Nitro Gas shock absorbers are recommended for all full-size applications. The nitrogen gas pressure reduces fading and gives quicker shock response.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2016 - Ford F-150 | Rear | 4WD |
- EIB Pro-Truck Coilovers
- Eibach Pro-Truck Coilover 2.0 Front for 15-20 Ford F-150 2WD
- Pair of Front Coilovers
- EPS: 2266
- Product Attributes:
- Adjustable Ride Height: Yes
-
Features:
- Pre-Assembled, Factory Direct Replacement Front Coilover - No Additional Parts Required. Sold in Pairs.
- Adjustable Threaded Spring Perch to Accommodate Increased Loads and Maximum Clearance. ERO Off-Road Race Spring Equipped and Compatible.
- Anodized 6061-T6 Billet Aluminum Mounts, 46mm Piston, Monotube Design with Nitrogen Filled Variable Force Valving.
- Individually Dyno Tested for Matched Performance and Reliability. Heavy Duty Bushing System also Cycle Tested.
- Engineered, Tested and Manufactured by Eibach in the U.S.A.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2016 - Ford F-150 | V | - | Front | 6 Cyl 2.7L | RWD | 164 |
- EIB Pro-Truck Coilovers
- Eibach Pro-Truck Coilover 2.0 Front for 15-20 Ford F-150 2WD
- Pair of Front Coilovers
- EPS: 2006
- Product Attributes:
- Adjustable Ride Height: Yes
-
Features:
- Pre-Assembled, Factory Direct Replacement Front Coilover - No Additional Parts Required. Sold in Pairs.
- Adjustable Threaded Spring Perch to Accommodate Increased Loads and Maximum Clearance. ERO Off-Road Race Spring Equipped and Compatible.
- Anodized 6061-T6 Billet Aluminum Mounts, 46mm Piston, Monotube Design with Nitrogen Filled Variable Force Valving.
- Individually Dyno Tested for Matched Performance and Reliability. Heavy Duty Bushing System also Cycle Tested.
- Engineered, Tested and Manufactured by Eibach in the U.S.A.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2016 - Ford F-150 | V | 3496 | Front | 6 Cyl 3.5L | RWD | 213 |
- 2 (in) - 2.63 (in) Lift
- 2015-2020 F150 4WD 2-2.63" LIFT 2.5 VS REMOTE RTESERVOIR COILOVER KIT
- 15-20 F150 4WD 2-2.63" 2.5 VS RR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: No
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257337 - 7/8 Shaft 11.25 Oal, 7.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys - 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys - 20x9" W/ 5.625" Backspace / 16mm Offset
- Icon Alloys | 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys | 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys | 20x9" W/ 5.625" Backspace / 16mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Flat On Bar Pin
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel over stock
- Vehicle specific tuned front shocks for superior shock damping and control
- External reservoir to attain cooler operating temperatures during extended off-road use
- Improved ride quality over stock both on and off-road
- Height-adjustable coilovers offer 1.75-2.63” of lift height adjustment
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" induction hardened, chrome plated shaft
- High strength alloy CNC machined lower bar pin
- FK Rod End bearings for extended longevity and minimal deflection
- 100% Bolt-on - no cutting or welding necessary for installation
- ICON Vehicle Dynamics V.S. Series 2.5” remote reservoir coilover shocks are an incredible upgrade for the front end of the 2015-2020 Ford F150 4WD. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while offering 2-2.63” of lift height adjustability for use of larger, more aggressive wheel and tire combinations. The larger 2.5” shock body and increased piston area over stock components provides improved damping ability and outstanding ride characteristics across varying types of terrain. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. When paired with ICON rear 2.0 Aluminum Series or 2.5" Series shocks, vehicle control will be balanced front to rear resulting in the best overall driving experience for your F150.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2016 - Ford F-150 | Front | Lariat | 4WD |
- 09-23 F150 2/4WD 04-08 F150 4WD REAR 2.5 VS PB PAIR
- Used with 0 (in) to 1 (in) Lift
- ICON 2.5 Series shocks are configured specifically for each application in both length and damping tune. Piggyback reservoir improves cooling and creates an internal Bump Zone that when used creates an additional 20% of damping force.
- 09-UP F150 2/4WD 04-08 F150 4WD REAR 2.5 VS PB PAIR
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Cylinder Color: Grey
- Upper Mount Type: Eyelet
- Tube Outside Diameter: 2.5
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Shaft Material: Chrome
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Boot Included: No
- Damping Type: Oil
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable: No
- Shock Absorber Body End Measuring Point: Center Of Eylet
- External Reservoir: Yes
- Bore Diameter: 2.25
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257341s - 7/8 Shaft 15.25 Oal, 11.00 Travel Short
- Shaft Diameter: 0.875
-
Features:
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- All ICON 2.5 Series Piggyback and Remote Reservoir shocks can be upgraded to ICON’s Compression Damping Control Valve (CDCV)
- 100% Rebuildable
- 100% Revalveable
- Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with piggyback reservoir
- One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 7/8” diameter induction hardened, chrome plated shock shaft
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. If you are looking for a more user defined tune, consider looking into the Compression Damping Control Valve (CDCV) shocks.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2016 - Ford F-150 | Rear | Lariat |
- Raises Front 0 (in) - 2.63 (in) Use Up To 33 (in) x 11.50 (in) Tires ; Lift heights above 2” over stock may require aftermarket front upper control arms to maintain proper alignment Recommended Aftermarket Wheel Size: 17x8.5" with 5” Backspace / 6mm Offset
- These ICON coilovers feature 2.5 Series shocks and coil springs optimized for this application. The shock’s larger 2.5” body and increased piston area improves damping ability and ride quality across varying types of terrain.
- 15-20 F150 4WD 0-2.63" 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: No
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257337 - 7/8 Shaft 11.25 Oal, 7.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys - 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys - 20x9" W/ 5.625" Backspace / 16mm Offset
- Icon Alloys | 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys | 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys | 20x9" W/ 5.625" Backspace / 16mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: No
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock
- 100% Bolt-on - no drilling,cutting or welding necessary for installation
- Unique valving developed for the lighter weight of the 2015-2020 F-150
- Vehicle specific tuned for superior shock damping and control
- Adjustable 0-2.63" lift height
- ICON engineered Eibach Springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" shaft
- High strength alloy CNC machined lower bar pin
- FK rod end bearings for extended longevity and minimal deflection
- ICON Vehicle Dynamics V.S. Series 2.5” coilover shocks are an incredible upgrade for the front end of 2015-2020 Ford F-150 4WD trucks. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while 0-2.63” of lift height adjustability allows the use of larger, more aggressive wheel and tire combinations. The larger 2.5” shock body and increased piston area over stock components provides improved damping ability and outstanding ride characteristics across varying types of terrain. When paired with ICON rear 2.0 Aluminum Series or 2.5 Series shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your F-150 truck.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2016 - Ford F-150 | Front | SSV | 4WD |
- Raises Front 2 (in) - 2.63 (in) Use Up To 33 (in) x 11.50 (in) Tires ; Lift heights above 2” over stock may require aftermarket front upper control arms to maintain proper alignment Recommended Aftermarket Wheel Size: 17x8.5" with 5” Backspace / 6mm Offset
- 2015-2020 F150 4WD 2-2.63" LIFT 2.5 VS REMOTE RTESERVOIR COILOVER KIT
- 15-20 F150 4WD 2-2.63" 2.5 VS RR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: No
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257337 - 7/8 Shaft 11.25 Oal, 7.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys - 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys - 20x9" W/ 5.625" Backspace / 16mm Offset
- Icon Alloys | 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys | 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys | 20x9" W/ 5.625" Backspace / 16mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Flat On Bar Pin
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel over stock
- Vehicle specific tuned front shocks for superior shock damping and control
- External reservoir to attain cooler operating temperatures during extended off-road use
- Improved ride quality over stock both on and off-road
- Height-adjustable coilovers offer 1.75-2.63” of lift height adjustment
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" induction hardened, chrome plated shaft
- High strength alloy CNC machined lower bar pin
- FK Rod End bearings for extended longevity and minimal deflection
- 100% Bolt-on - no cutting or welding necessary for installation
- ICON Vehicle Dynamics V.S. Series 2.5” remote reservoir coilover shocks are an incredible upgrade for the front end of the 2015-2020 Ford F150 4WD. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while offering 2-2.63” of lift height adjustability for use of larger, more aggressive wheel and tire combinations. The larger 2.5” shock body and increased piston area over stock components provides improved damping ability and outstanding ride characteristics across varying types of terrain. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. When paired with ICON rear 2.0 Aluminum Series or 2.5" Series shocks, vehicle control will be balanced front to rear resulting in the best overall driving experience for your F150.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2016 - Ford F-150 | Front | SSV | 4WD |
- EIB Pro-Truck Coilovers
- Eibach Pro-Truck Coilover 2.0 Front/Sport Rear for 15-20 Ford F-150 V6 2.7L 4WD
- Pair of Front Coilovers + Rear Shocks
-
Features:
- Stage 2 system featuring Pro-Truck-Coilover 2.0's + Rear Sport Shocks
- Front Adjustable Threaded Spring Perch to Accommodate Increased Loads and Maximum Clearance. ERO Off-Road Race Spring Equipped and Compatible.
- Anodized 6061-T6 Billet Aluminum Coilover Mounts, 46mm Piston, Monotube Design with Nitrogen Filled Variable Force Valving.
- Individually Dyno Tested for Matched Performance and Reliability. Heavy Duty Bushing System also Cycle Tested.
- Engineered, Tested and Manufactured by Eibach in the U.S.A.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2016 - Ford F-150 | V | 3496 | 6 Cyl 3.5L | 4WD | 213 |
- EIB Pro-Truck Coilovers
- Eibach Pro-Truck Coilover Stage 2R 15-20 Ford F-150 SuperCrew 3.5L V6 EcoBoost 4WD
- Pair of Front Coilovers + Rear Reservoir Shocks
-
Features:
- Stage 2 system featuring Pro-Truck-Coilover 2.0's + Pro-Truck Reservoir Sport Shocks
- Height Adjustable Front Coilover and External Reservoir Rear Shocks for Increased Off-Road Performance
- Anodized 6061-T6 Billet Aluminum Coilover Mounts, 46mm Piston, Monotube Design with Nitrogen Filled Variable Force Valving.
- Individually Dyno Tested for Matched Performance and Reliability. Heavy Duty Bushing System also Cycle Tested.
- Engineered, Tested and Manufactured by Eibach in the U.S.A.
- The PRO-TRUCK Sport Shock is the perfect solution for those looking for a straightforward, reliable damper setup that gains ground clearance, ride comfort and additional travel without requiring any additional suspension components. For optimal performance, PRO-TRUCK Sport Shocks are designed to be used in conjunction with Eibach PRO-LIFT-KIT springs.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2016 - Ford F-150 | 4WD |
Showing 1 - 10 of 16 products
Loading...