Shop By Product Matching "AMO"
Choose your Submodel for your 2021 Chevrolet Silverado 1500
Image
Product
Price
- SHOCKS
- 0"-2.5" FOX 2.0 PERFORMANCE SERIES FRONT COIL OVERS COILOVERS ARE ADJUSTABLE PRESET MAY VARY. PLEASE REFER TO FOX INSTRUCTION MANUAL FOR PROPER ADJUSTMENT STOCK HEIGHT FOR TRAIL BOSS MODELS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 871925FC IS A PAIR OF FOX 2.0 PERFORMANCE SERIES COIL OVERS (ALUMINUM BODY)(0"-2.5" LIFT HEIGHT)
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Chevrolet Silverado 1500 |
- EIB Pro-Truck Coilovers
- Eibach 20-22 GM 1500 Truck 3.0L 6 Cyl. Turbo Diesel 4WD Front Pro-Truck Coilover 2.0
- Pair of Front Coilovers
- Product Attributes:
- Adjustable Height: Yes
-
Features:
- Pre-Assembled, Factory Direct Replacement Front Coilover - No Additional Parts Required. Sold in Pairs.
- Adjustable Threaded Spring Perch to Accommodate Increased Loads and Maximum Clearance. ERO Off-Road Race Spring Equipped and Compatible.
- Anodized 6061-T6 Billet Aluminum Mounts, 46mm Piston, Monotube Design with Nitrogen Filled Variable Force Valving.
- Individually Dyno Tested for Matched Performance and Reliability. Heavy Duty Bushing System also Cycle Tested.
- Engineered, Tested and Manufactured by Eibach in the U.S.A.
- Developed utilizing our extended-travel monotube design and variable force valving, Eibach PRO-TRUCK COILOVER 2.0 delivers control during on-road transit and compliance for maximum traction on the trails.
Additional Fitment Information:
| Vehicle | Fuel Type | Drive Type |
|---|---|---|
| 2021 - Chevrolet Silverado 1500 | GAS | 4WD |
- EIB Pro-Truck Coilovers
- Eibach 20-22 GM 1500 Truck 3.0L 6 Cyl. Turbo Diesel 4WD Front Pro-Truck Coilover 2.0
- Pair of Front Coilovers
- Product Attributes:
- Adjustable Height: Yes
-
Features:
- Pre-Assembled, Factory Direct Replacement Front Coilover - No Additional Parts Required. Sold in Pairs.
- Adjustable Threaded Spring Perch to Accommodate Increased Loads and Maximum Clearance. ERO Off-Road Race Spring Equipped and Compatible.
- Anodized 6061-T6 Billet Aluminum Mounts, 46mm Piston, Monotube Design with Nitrogen Filled Variable Force Valving.
- Individually Dyno Tested for Matched Performance and Reliability. Heavy Duty Bushing System also Cycle Tested.
- Engineered, Tested and Manufactured by Eibach in the U.S.A.
- Developed utilizing our extended-travel monotube design and variable force valving, Eibach PRO-TRUCK COILOVER 2.0 delivers control during on-road transit and compliance for maximum traction on the trails.
Additional Fitment Information:
| Vehicle | Fuel Type | Drive Type |
|---|---|---|
| 2021 - Chevrolet Silverado 1500 | DIESEL | 4WD |
- 19-24 GM 1500 FRONT 2.5 VS IR COILOVER KIT
- Up to 35x12.50 (in) Tire with Minor Fender Trimming Raises Front 1.5 (in) - 3.5 (in) ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
- ICON's 2.5 Series coilover shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune.
- 19-23 GM 1500 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Cylinder Color: Silver
- Grade Type: Performance
- Active or Passive Suspension: Passive
- Self-Leveling: No
- Adjustable Compression: No
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: No
- Adjustable: No
- Adjustable Rebound: No
- Material:
- Aluminum
- Steel
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257339 - 7/8 Shaft 13.25 Oal, 9.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Cylinder Finish: Cadmium Plated
- Recommended Aftermarket Tires:
- (sierra) 305/70r17 (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- (silverado) 315/70r17 (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Cylinder Material: Steel
- Internal Construction Type: Single Tube
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Flat On Bar Pin
- Adjustable Height: Yes
- Valving Type: Digressive
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Minimum Lift: 0
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
- Remote Reservoir: No
-
Features:
- 6061 Aircraft grade aluminum CNC machined components
- PTFE lined spherical bearings for extended longevity and minimal deflection
- High strength alloy CNC machined lower bar pin and application specific mounting hardware
- Fully rebuildable and re-tunable
- Increased front wheel travel and improved ride quality over stock
- Vehicle specific tuned for superior shock damping and control
- Adjustable coilovers yield 1.5-3.5” or 2.5-3.25" of front lift height over stock, depending on vehicle
- Internal nitrogen reservoir ensures consistent performance under hard use
- ICON engineered coil springs
- Corrosion resistant CAD plated 2.5” diameter shock bodies
- 7/8" diameter hardened chrome plated shafts
- ICON Vehicle Dynamics V.S. Series 2.5” coilover shocks are an incredible upgrade for the front-end of 2019-2024 Chevrolet Silverado 1500/GMC Sierra 1500 trucks and 2021-2023 Chevrolet Tahoe & Suburban/GMC Yukon & Yukon XL SUVs. Their longer length offers an increase in total front wheel travel compared to stock, for a total of 9” front wheel travel (a 20% increase over stock) while still being compatible with the stock front upper control arms. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while 1.5-3.5” of lift height adjustability on pickup trucks or 2.5-3.25” of lift height adjustability on SUVs, allows the use of larger, more aggressive wheel and tire combinations. The larger 2.5” diameter shock body and increased piston area over stock components provides improved damping ability and outstanding ride characteristics across varying types of terrain. When paired with ICON rear 2.0 Aluminum Series or 2.5 Series shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your GM pickup truck or SUV.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2021 - Chevrolet Silverado 1500 | V | - | Front | GAS | 6 Cyl 4.3L | WT | 262 |
- 19-24 GM 1500 FRONT 2.5 VS IR COILOVER KIT
- without Adaptive Ride Control System Raises Front 1.5 (in) - 3.5 (in) ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
- ICON's 2.5 Series coilover shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune.
- 19-23 GM 1500 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Cylinder Color: Silver
- Grade Type: Performance
- Active or Passive Suspension: Passive
- Self-Leveling: No
- Adjustable Compression: No
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: No
- Adjustable: No
- Adjustable Rebound: No
- Material:
- Aluminum
- Steel
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257339 - 7/8 Shaft 13.25 Oal, 9.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Cylinder Finish: Cadmium Plated
- Recommended Aftermarket Tires:
- (sierra) 305/70r17 (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- (silverado) 315/70r17 (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Cylinder Material: Steel
- Internal Construction Type: Single Tube
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Flat On Bar Pin
- Adjustable Height: Yes
- Valving Type: Digressive
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Minimum Lift: 0
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
- Remote Reservoir: No
-
Features:
- 6061 Aircraft grade aluminum CNC machined components
- PTFE lined spherical bearings for extended longevity and minimal deflection
- High strength alloy CNC machined lower bar pin and application specific mounting hardware
- Fully rebuildable and re-tunable
- Increased front wheel travel and improved ride quality over stock
- Vehicle specific tuned for superior shock damping and control
- Adjustable coilovers yield 1.5-3.5” or 2.5-3.25" of front lift height over stock, depending on vehicle
- Internal nitrogen reservoir ensures consistent performance under hard use
- ICON engineered coil springs
- Corrosion resistant CAD plated 2.5” diameter shock bodies
- 7/8" diameter hardened chrome plated shafts
- ICON Vehicle Dynamics V.S. Series 2.5” coilover shocks are an incredible upgrade for the front-end of 2019-2024 Chevrolet Silverado 1500/GMC Sierra 1500 trucks and 2021-2023 Chevrolet Tahoe & Suburban/GMC Yukon & Yukon XL SUVs. Their longer length offers an increase in total front wheel travel compared to stock, for a total of 9” front wheel travel (a 20% increase over stock) while still being compatible with the stock front upper control arms. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while 1.5-3.5” of lift height adjustability on pickup trucks or 2.5-3.25” of lift height adjustability on SUVs, allows the use of larger, more aggressive wheel and tire combinations. The larger 2.5” diameter shock body and increased piston area over stock components provides improved damping ability and outstanding ride characteristics across varying types of terrain. When paired with ICON rear 2.0 Aluminum Series or 2.5 Series shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your GM pickup truck or SUV.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2021 - Chevrolet Silverado 1500 | V | 6162 | Front | 8 Cyl 6.2L | High Country | 376 |
- Up to 35x12.50 (in) Tire with Minor Fender Trimming Raises Front 1.5 (in) - 3.5 (in) Requires ICON Front Upper Control Arms ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
- ICON's 2.5 Series coilover shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune.
- 19-23 GM 1500 EXT TRAVEL 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: No
- Material:
- Aluminum
- Steel
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257339 - 7/8 Shaft 13.25 Oal, 9.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires:
- (sierra) 305/70r17 (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- (silverado) 315/70r17 (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Flat On Bar Pin
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: No
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Adjustable coilovers yield 1.5-3.5” of front lift height over stock
- Increased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use
- Superior low speed control reduces body roll and increases on-road stability
- High quality ICON-engineered Eibach coil springs are guaranteed for life against sagging or breakage
- Corrosion resistant CAD plated shock body with 7/8" shaft
- Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life
- Bolt-in design makes for an easy install into OEM shock location
- ICON's Vehicle Specific (V.S.) 2.5 Series coilover shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON shock absorbers, V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2021 - Chevrolet Silverado 1500 | V | - | Front | GAS | 6 Cyl 4.3L | WT | 262 |
- Up to 35x12.50 (in) Tire with Minor Fender Trimming Raises Front 2.375 (in) - 3.75 (in) ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
- EXP Series shock absorbers by ICON combine the performance of a fully rebuildable 2.5-inch diameter premium shock absorber with the convenience and cost-benefits of re-using the vehicle’s factory coil spring and other components.
- 19-23 GM 1500 FRONT 2.5 EXP COILOVER
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: No
- Body Diameter: 2.5
- Grade Type: Performance
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Boot Included: No
- Damping Type: Oil
- Maximum Lift: 3.75
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Shoulder Of Stem
- Adjustable Damping: No
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Flat On Bar Pin
- Minimum Lift: 2.375
- Material:
- Aluminum
- Steel
- Service Parts: 252010 - 2.5 Ifp Rebuild Kit
- Remote Reservoir: No
- Shaft Diameter: 0.875
-
Features:
- Vehicle specific design for the 2019-2023 GM 1500 trucks
- Adjustable ride heights from 2.375-3.75” of front lift over stock with the use of snap ring
- Utilizes factory coils
- 2.5 Aluminum Series Shock with Internal Reservoir
- CNC machined 6061 aluminum components with a black anodize finish
- PTFE lined bearings for extended longevity and minimal deflection
- Inverted shaft up design featuring 7/8” diameter, induction hardened, chrome plated shaft
- One-piece impact extruded aluminum hard anodized cylinders offer excellent corrosion resistance and consistent finish
- 100% Bolt-on - no cutting or welding necessary for installation
- Fully rebuildable and re-tunable
- The 6061-billet aluminum coil spring seat is CNC machined to fit the truck’s OE coil springs. A series of snap-ring grooves machined into the shock body provide easily-selectable front-end ride height adjustment from 2.375” to 3.75" of lift over stock.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Chevrolet Silverado 1500 | Front | WT |
- Up to 35x12.50 (in) Tire with Minor Fender Trimming without Adaptive Ride Control System Raises Front 1.5 (in) - 3.5 (in) 0 (mm) Offset Aftermarket Wheels Recommended
- ICON's 2.5 Series coilover shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune.
- 19-24 GM 1500 FRONT 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Cylinder Color: Silver
- Grade Type: Performance
- Active or Passive Suspension: Passive
- Self-Leveling: No
- Adjustable Compression: No
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: No
- Adjustable: No
- Adjustable Rebound: No
- Material:
- Aluminum
- Steel
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257339 - 7/8 Shaft 13.25 Oal, 9.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Cylinder Finish: Cadmium Plated
- Recommended Aftermarket Tires:
- (sierra) 305/70r17 (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- (silverado) 315/70r17 (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Cylinder Material: Steel
- Internal Construction Type: Single Tube
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Flat On Bar Pin
- Adjustable Height: Yes
- Valving Type: Digressive
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Minimum Lift: 0
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
- Remote Reservoir: No
-
Features:
- 6061 Aircraft grade aluminum CNC machined components
- PTFE lined spherical bearings for extended longevity and minimal deflection
- High strength alloy CNC machined lower bar pin and application specific mounting hardware
- Fully rebuildable and re-tunable
- Increased front wheel travel and improved ride quality over stock
- Vehicle specific tuned for superior shock damping and control
- Adjustable coilovers yield 1.5-3.5” or 2.5-3.25" of front lift height over stock, depending on vehicle
- Internal nitrogen reservoir ensures consistent performance under hard use
- ICON engineered coil springs
- Corrosion resistant CAD plated 2.5” diameter shock bodies
- 7/8" diameter hardened chrome plated shafts
- ICON Vehicle Dynamics V.S. Series 2.5” coilover shocks are an incredible upgrade for the front-end of 2019-2024 Chevrolet Silverado 1500/GMC Sierra 1500 trucks and 2021-2023 Chevrolet Tahoe & Suburban/GMC Yukon & Yukon XL SUVs. Their longer length offers an increase in total front wheel travel compared to stock, for a total of 9” front wheel travel (a 20% increase over stock) while still being compatible with the stock front upper control arms. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while 1.5-3.5” of lift height adjustability on pickup trucks or 2.5-3.25” of lift height adjustability on SUVs, allows the use of larger, more aggressive wheel and tire combinations. The larger 2.5” diameter shock body and increased piston area over stock components provides improved damping ability and outstanding ride characteristics across varying types of terrain. When paired with ICON rear 2.0 Aluminum Series or 2.5 Series shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your GM pickup truck or SUV.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model |
|---|---|---|---|
| 2021 - Chevrolet Silverado 1500 | Front | GAS | High Country |
- Up to 35x12.50 (in) Tire with Minor Fender Trimming without Adaptive Ride Control (ARC) Raises Front 1.75 (in) - 3 (in) ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
- EXP Series shock absorbers by ICON combine the performance of a fully rebuildable 2.5-inch diameter premium shock absorber with the convenience and cost-benefits of re-using the vehicle’s factory coil spring and other components.
- 19-23 GM 1500 FRONT 2.5 EXP COILOVER
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: No
- Body Diameter: 2.5
- Grade Type: Performance
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Boot Included: No
- Damping Type: Oil
- Maximum Lift: 3.75
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Shoulder Of Stem
- Adjustable Damping: No
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Flat On Bar Pin
- Minimum Lift: 2.375
- Material:
- Aluminum
- Steel
- Service Parts: 252010 - 2.5 Ifp Rebuild Kit
- Remote Reservoir: No
- Shaft Diameter: 0.875
-
Features:
- Vehicle specific design for the 2019-2023 GM 1500 trucks
- Adjustable ride heights from 2.375-3.75” of front lift over stock with the use of snap ring
- Utilizes factory coils
- 2.5 Aluminum Series Shock with Internal Reservoir
- CNC machined 6061 aluminum components with a black anodize finish
- PTFE lined bearings for extended longevity and minimal deflection
- Inverted shaft up design featuring 7/8” diameter, induction hardened, chrome plated shaft
- One-piece impact extruded aluminum hard anodized cylinders offer excellent corrosion resistance and consistent finish
- 100% Bolt-on - no cutting or welding necessary for installation
- Fully rebuildable and re-tunable
- The 6061-billet aluminum coil spring seat is CNC machined to fit the truck’s OE coil springs. A series of snap-ring grooves machined into the shock body provide easily-selectable front-end ride height adjustment from 2.375” to 3.75" of lift over stock.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model |
|---|---|---|---|
| 2021 - Chevrolet Silverado 1500 | Front | DIESEL | High Country |
- 19-24 GM 1500 FRONT 2.5 VS IR COILOVER KIT
- 1.5" - 3.5" Lift
- ICON's 2.5 Series coilover shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune.
- 19-UP GM 1500 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Cylinder Color: Silver
- Grade Type: Performance
- Active or Passive Suspension: Passive
- Self-Leveling: No
- Adjustable Compression: No
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: No
- Adjustable: No
- Adjustable Rebound: No
- Material:
- Aluminum
- Steel
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257339 - 7/8 Shaft 13.25 Oal, 9.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Cylinder Finish: Cadmium Plated
- Recommended Aftermarket Tires:
- (sierra) 305/70r17 (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- (silverado) 315/70r17 (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Cylinder Material: Steel
- Internal Construction Type: Single Tube
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Flat On Bar Pin
- Adjustable Height: Yes
- Valving Type: Digressive
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Minimum Lift: 0
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
- Remote Reservoir: No
-
Features:
- 6061 Aircraft grade aluminum CNC machined components
- PTFE lined spherical bearings for extended longevity and minimal deflection
- High strength alloy CNC machined lower bar pin and application specific mounting hardware
- Fully rebuildable and re-tunable
- Increased front wheel travel and improved ride quality over stock
- Vehicle specific tuned for superior shock damping and control
- Adjustable coilovers yield 1.5-3.5” or 2.5-3.25" of front lift height over stock, depending on vehicle
- Internal nitrogen reservoir ensures consistent performance under hard use
- ICON engineered coil springs
- Corrosion resistant CAD plated 2.5” diameter shock bodies
- 7/8" diameter hardened chrome plated shafts
- ICON Vehicle Dynamics V.S. Series 2.5” coilover shocks are an incredible upgrade for the front-end of 2019-2024 Chevrolet Silverado 1500/GMC Sierra 1500 trucks and 2021-2023 Chevrolet Tahoe & Suburban/GMC Yukon & Yukon XL SUVs. Their longer length offers an increase in total front wheel travel compared to stock, for a total of 9” front wheel travel (a 20% increase over stock) while still being compatible with the stock front upper control arms. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while 1.5-3.5” of lift height adjustability on pickup trucks or 2.5-3.25” of lift height adjustability on SUVs, allows the use of larger, more aggressive wheel and tire combinations. The larger 2.5” diameter shock body and increased piston area over stock components provides improved damping ability and outstanding ride characteristics across varying types of terrain. When paired with ICON rear 2.0 Aluminum Series or 2.5 Series shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your GM pickup truck or SUV.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Chevrolet Silverado 1500 | Front |
Showing 1 - 10 of 28 products
Loading...