Image
Product
Price
- with Tremor Package Raises Front 0 (in) - 2.5 (in) Up to 33x11.25 (in) Tire with Minor Fender Trimming Requires ICON Front Upper Control Arms ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road.
- 19-23 RANGER EXT TRAVEL 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: No
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257338 - 7/8 Shaft 12.25 Oal, 8.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires:
- 33"x11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Tires: 33"x11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5 W/ 5.75" Backspace / 25mm Offset
- Icon Alloys - 18x9" W/ 6.00” Backspace / 25mm Offset
- Icon Alloys | 17x8.5 W/ 5.75" Backspace / 25mm Offset
- Recommended Aftermarket Wheels: Icon Alloys | 18x9" W/ 6.00” Backspace / 25mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Flat On Bar Pin
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Minimum Lift: 0
- Spring Material: Steel
- Remote Reservoir: No
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Adjustable coilovers yield 0-3.5” of front lift height
- Vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use
- Extended travel length requires ICON upper control arms but offers more wheel travel and improved performance
- Superior low speed control reduces body roll and increases on-road stability
- High quality ICON-engineered coil springs are guaranteed for life against sagging or breakage
- Corrosion resistant CAD plated shock body with 7/8" diameter shaft
- Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life
- Bolt-in design makes for an easy install into OEM shock location
- ICON Vehicle Dynamics V.S. 2.5 Series internal reservoir front coilover shocks are an incredible upgrade for the front end of the 2019-2023 Ford Ranger. These adjustable coilovers allow up to 0-3.5” of lift height adjustability, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific valving along with the larger 2.5” shock body and increased piston area over stock components yield superior ride quality and suspension performance both on- and off-road. Their extended travel length requires ICON front upper control arms and yields increased front wheel travel compared to ICON standard travel coilovers for maximum suspension performance. When paired with ICON 2.0 or 2.5 Aluminum Series rear shock absorbers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Ford Ranger.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ford Ranger | Front | Lariat |
- 19-23 RANGER EXT TRAVEL 2.5 VS RR COILOVER KIT
- 0" - 3.5" Lift Requires Aftermarket front Upper Control Arms
- ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road.
- 19-UP RANGER EXT TRAVEL 2.5 VS RR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: No
- Material:
- Aluminum
- Steel
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257338 - 7/8 Shaft 12.25 Oal, 8.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires:
- 285/70/r17 (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- 33"x11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5 W/ 5.75" Backspace / 25mm Offset
- Icon Alloys - 18x9" W/ 6.00” Backspace / 25mm Offset
- Icon Alloys | 17x8.5 W/ 5.75" Backspace / 25mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Flat On Bar Pin
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Minimum Lift: 0
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel over stock
- Vehicle specific tuned front shocks for superior shock damping and control
- External reservoir to attain cooler operating temperatures during extended off-road use
- Improved ride quality over stock both on and off-road
- Height-adjustable coilovers offer 0-3.5” of lift height adjustment
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" induction hardened, chrome plated shaft
- High strength alloy CNC machined lower bar pin
- FK Rod End bearings for extended longevity and minimal deflection
- 100% Bolt-on - no cutting or welding necessary for installation
- ICON Vehicle Dynamics V.S. Series 2.5” remote reservoir coilover shocks are an incredible upgrade for the front end of the 2019-2023 Ford Ranger. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while offering 0-3.5” of lift height adjustability for use of larger, more aggressive wheel and tire combinations. The larger 2.5” shock body and increased piston area over stock components provides improved damping ability and outstanding ride characteristics across varying types of terrain. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. When paired with ICON rear 2.0 Aluminum Series or 2.5" Series shocks, vehicle control will be balanced front to rear resulting in the best overall driving experience for your Ranger.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Ford Ranger | Front |
- with Tremor (in) Package Raises Front 0 (in) - 2.5 (in) Use Up To 33 (in) x 11.25 (in) Tires Requires ICON Front Upper Control Arms ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road.
- 19-23 RANGER EXT TRAVEL 2.5 VS RR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: No
- Material:
- Aluminum
- Steel
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257338 - 7/8 Shaft 12.25 Oal, 8.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires:
- 285/70/r17 (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- 33"x11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5 W/ 5.75" Backspace / 25mm Offset
- Icon Alloys - 18x9" W/ 6.00” Backspace / 25mm Offset
- Icon Alloys | 17x8.5 W/ 5.75" Backspace / 25mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Flat On Bar Pin
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Minimum Lift: 0
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel over stock
- Vehicle specific tuned front shocks for superior shock damping and control
- External reservoir to attain cooler operating temperatures during extended off-road use
- Improved ride quality over stock both on and off-road
- Height-adjustable coilovers offer 0-3.5” of lift height adjustment
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" induction hardened, chrome plated shaft
- High strength alloy CNC machined lower bar pin
- FK Rod End bearings for extended longevity and minimal deflection
- 100% Bolt-on - no cutting or welding necessary for installation
- ICON Vehicle Dynamics V.S. Series 2.5” remote reservoir coilover shocks are an incredible upgrade for the front end of the 2019-2023 Ford Ranger. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while offering 0-3.5” of lift height adjustability for use of larger, more aggressive wheel and tire combinations. The larger 2.5” shock body and increased piston area over stock components provides improved damping ability and outstanding ride characteristics across varying types of terrain. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. When paired with ICON rear 2.0 Aluminum Series or 2.5" Series shocks, vehicle control will be balanced front to rear resulting in the best overall driving experience for your Ranger.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ford Ranger | Front | XLT |
- 19-23 RANGER EXT TRAVEL 2.5 VS IR COILOVER KIT
- 0" - 3.5" Lift Requires Aftermarket front Upper Control Arms
- ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road.
- 2019-UP RANGER 4WD EXT TRAVEL 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: No
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257338 - 7/8 Shaft 12.25 Oal, 8.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires:
- 285/70/r17 (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- 33"x11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Tires: 33"x11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5 W/ 5.75" Backspace / 25mm Offset
- Icon Alloys - 18x9" W/ 6.00” Backspace / 25mm Offset
- Icon Alloys | 17x8.5 W/ 5.75" Backspace / 25mm Offset
- Recommended Aftermarket Wheels: Icon Alloys | 18x9" W/ 6.00” Backspace / 25mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Flat On Bar Pin
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Minimum Lift: 0
- Spring Material: Steel
- Remote Reservoir: No
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Adjustable coilovers yield 0-3.5” of front lift height
- Vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use
- Extended travel length requires ICON upper control arms but offers more wheel travel and improved performance
- Superior low speed control reduces body roll and increases on-road stability
- High quality ICON-engineered coil springs are guaranteed for life against sagging or breakage
- Corrosion resistant CAD plated shock body with 7/8" diameter shaft
- Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life
- Bolt-in design makes for an easy install into OEM shock location
- ICON Vehicle Dynamics V.S. 2.5 Series internal reservoir front coilover shocks are an incredible upgrade for the front end of the 2019-2023 Ford Ranger. These adjustable coilovers allow up to 0-3.5” of lift height adjustability, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific valving along with the larger 2.5” shock body and increased piston area over stock components yield superior ride quality and suspension performance both on- and off-road. Their extended travel length requires ICON front upper control arms and yields increased front wheel travel compared to ICON standard travel coilovers for maximum suspension performance. When paired with ICON 2.0 or 2.5 Aluminum Series rear shock absorbers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Ford Ranger.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Ford Ranger | Front |
- without Tremor Package Raises Front 0 (in) - 3.5 (in) Up to 33x11.25 (in) Tire with Minor Fender Trimming Requires ICON Front Upper Control Arms ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road.
- 19-23 RANGER EXT TRAVEL 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: No
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257338 - 7/8 Shaft 12.25 Oal, 8.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires:
- 33"x11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Tires: 33"x11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5 W/ 5.75" Backspace / 25mm Offset
- Icon Alloys - 18x9" W/ 6.00” Backspace / 25mm Offset
- Icon Alloys | 17x8.5 W/ 5.75" Backspace / 25mm Offset
- Recommended Aftermarket Wheels: Icon Alloys | 18x9" W/ 6.00” Backspace / 25mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Flat On Bar Pin
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Minimum Lift: 0
- Spring Material: Steel
- Remote Reservoir: No
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Adjustable coilovers yield 0-3.5” of front lift height
- Vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use
- Extended travel length requires ICON upper control arms but offers more wheel travel and improved performance
- Superior low speed control reduces body roll and increases on-road stability
- High quality ICON-engineered coil springs are guaranteed for life against sagging or breakage
- Corrosion resistant CAD plated shock body with 7/8" diameter shaft
- Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life
- Bolt-in design makes for an easy install into OEM shock location
- ICON Vehicle Dynamics V.S. 2.5 Series internal reservoir front coilover shocks are an incredible upgrade for the front end of the 2019-2023 Ford Ranger. These adjustable coilovers allow up to 0-3.5” of lift height adjustability, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific valving along with the larger 2.5” shock body and increased piston area over stock components yield superior ride quality and suspension performance both on- and off-road. Their extended travel length requires ICON front upper control arms and yields increased front wheel travel compared to ICON standard travel coilovers for maximum suspension performance. When paired with ICON 2.0 or 2.5 Aluminum Series rear shock absorbers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Ford Ranger.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ford Ranger | Front | XLT |
- Raises Front 0 (in) - 3.5 (in) Up to 33x11.25 (in) Tire with Minor Fender Trimming Requires ICON Front Upper Control Arms ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road.
- 19-23 RANGER EXT TRAVEL 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: No
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257338 - 7/8 Shaft 12.25 Oal, 8.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires:
- 33"x11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Tires: 33"x11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5 W/ 5.75" Backspace / 25mm Offset
- Icon Alloys - 18x9" W/ 6.00” Backspace / 25mm Offset
- Icon Alloys | 17x8.5 W/ 5.75" Backspace / 25mm Offset
- Recommended Aftermarket Wheels: Icon Alloys | 18x9" W/ 6.00” Backspace / 25mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Flat On Bar Pin
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Minimum Lift: 0
- Spring Material: Steel
- Remote Reservoir: No
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Adjustable coilovers yield 0-3.5” of front lift height
- Vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use
- Extended travel length requires ICON upper control arms but offers more wheel travel and improved performance
- Superior low speed control reduces body roll and increases on-road stability
- High quality ICON-engineered coil springs are guaranteed for life against sagging or breakage
- Corrosion resistant CAD plated shock body with 7/8" diameter shaft
- Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life
- Bolt-in design makes for an easy install into OEM shock location
- ICON Vehicle Dynamics V.S. 2.5 Series internal reservoir front coilover shocks are an incredible upgrade for the front end of the 2019-2023 Ford Ranger. These adjustable coilovers allow up to 0-3.5” of lift height adjustability, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific valving along with the larger 2.5” shock body and increased piston area over stock components yield superior ride quality and suspension performance both on- and off-road. Their extended travel length requires ICON front upper control arms and yields increased front wheel travel compared to ICON standard travel coilovers for maximum suspension performance. When paired with ICON 2.0 or 2.5 Aluminum Series rear shock absorbers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Ford Ranger.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ford Ranger | Front | XL |
- Raises Front 0 (in) - 3.5 (in) Use Up To 33 (in) x 11.25 (in) Tires Requires ICON Front Upper Control Arms ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road.
- 19-23 RANGER EXT TRAVEL 2.5 VS RR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: No
- Material:
- Aluminum
- Steel
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257338 - 7/8 Shaft 12.25 Oal, 8.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires:
- 285/70/r17 (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- 33"x11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5 W/ 5.75" Backspace / 25mm Offset
- Icon Alloys - 18x9" W/ 6.00” Backspace / 25mm Offset
- Icon Alloys | 17x8.5 W/ 5.75" Backspace / 25mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Flat On Bar Pin
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Minimum Lift: 0
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel over stock
- Vehicle specific tuned front shocks for superior shock damping and control
- External reservoir to attain cooler operating temperatures during extended off-road use
- Improved ride quality over stock both on and off-road
- Height-adjustable coilovers offer 0-3.5” of lift height adjustment
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" induction hardened, chrome plated shaft
- High strength alloy CNC machined lower bar pin
- FK Rod End bearings for extended longevity and minimal deflection
- 100% Bolt-on - no cutting or welding necessary for installation
- ICON Vehicle Dynamics V.S. Series 2.5” remote reservoir coilover shocks are an incredible upgrade for the front end of the 2019-2023 Ford Ranger. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while offering 0-3.5” of lift height adjustability for use of larger, more aggressive wheel and tire combinations. The larger 2.5” shock body and increased piston area over stock components provides improved damping ability and outstanding ride characteristics across varying types of terrain. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. When paired with ICON rear 2.0 Aluminum Series or 2.5" Series shocks, vehicle control will be balanced front to rear resulting in the best overall driving experience for your Ranger.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ford Ranger | Front | XLT Plus |
- with Tremor Package Raises Front 0 (in) - 2.5 (in) Use Up To 33 (in) x 11.25 (in) Tires Requires ICON Front Upper Control Arms ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road.
- 19-23 RANGER EXT TRAVEL 2.5 VS RR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: No
- Material:
- Aluminum
- Steel
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257338 - 7/8 Shaft 12.25 Oal, 8.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires:
- 285/70/r17 (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- 33"x11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5 W/ 5.75" Backspace / 25mm Offset
- Icon Alloys - 18x9" W/ 6.00” Backspace / 25mm Offset
- Icon Alloys | 17x8.5 W/ 5.75" Backspace / 25mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Flat On Bar Pin
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Minimum Lift: 0
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel over stock
- Vehicle specific tuned front shocks for superior shock damping and control
- External reservoir to attain cooler operating temperatures during extended off-road use
- Improved ride quality over stock both on and off-road
- Height-adjustable coilovers offer 0-3.5” of lift height adjustment
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" induction hardened, chrome plated shaft
- High strength alloy CNC machined lower bar pin
- FK Rod End bearings for extended longevity and minimal deflection
- 100% Bolt-on - no cutting or welding necessary for installation
- ICON Vehicle Dynamics V.S. Series 2.5” remote reservoir coilover shocks are an incredible upgrade for the front end of the 2019-2023 Ford Ranger. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while offering 0-3.5” of lift height adjustability for use of larger, more aggressive wheel and tire combinations. The larger 2.5” shock body and increased piston area over stock components provides improved damping ability and outstanding ride characteristics across varying types of terrain. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. When paired with ICON rear 2.0 Aluminum Series or 2.5" Series shocks, vehicle control will be balanced front to rear resulting in the best overall driving experience for your Ranger.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ford Ranger | Front | Lariat |
- 19-23 RANGER REAR 2.5 VS PB PAIR
- Used with 0" to 1" Lift
- ICON 2.5 Series shocks are designed to give you outstanding performance off-road and a smooth ride on the street. With a vehicle-specific design, these shocks are configured specifically for each application in both length and damping tune.
- 19-UP RANGER REAR 2.5 VS PB PAIR
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Cylinder Color: Silver
- Upper Mount Type: Eyelet
- Tube Outside Diameter: 2.5
- Grade Type: Performance
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Shaft Material: Chrome
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Boot Included: No
- Damping Type:
- Gas
- Oil
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable: No
- Shock Absorber Body End Measuring Point: Center Of Eylet
- Cylinder Diameter: 2.5
- External Reservoir: Piggyback Reservoir
- Bore Diameter: 2.25
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257339 - 7/8 Shaft 13.25 Oal, 9.00 Travel
- Shaft Diameter: 0.875
-
Features:
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with piggyback reservoir
- One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 7/8” diameter induction hardened, chrome plated shock shaft
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- All ICON 2.5 Series Piggyback and Remote Reservoir shocks can be upgraded to ICON’s Compression Damping Control Valve (CDCV)
- 100% Rebuildable
- 100% Revalveable
- ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. If you are looking for a more user defined tune, consider looking into the Compression Damping Control Valve (CDCV) shocks.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Ford Ranger | Rear |
- EIB Pro-Truck Coilovers
- Eibach Pro-Truck Coilover Stage 2R 19-22 Ford Ranger 4WD
- Pair of Front Coilovers + Rear Reservoir Shocks
-
Features:
- Stage 2 system featuring Pro-Truck-Coilover 2.0's + Pro-Truck Reservoir Sport Shocks
- Height Adjustable Front Coilover and External Reservoir Rear Shocks for Increased Off-Road Performance
- Anodized 6061-T6 Billet Aluminum Coilover Mounts, 46mm Piston, Monotube Design with Nitrogen Filled Variable Force Valving.
- Individually Dyno Tested for Matched Performance and Reliability. Heavy Duty Bushing System also Cycle Tested.
- Engineered, Tested and Manufactured by Eibach in the U.S.A.
- The PRO-TRUCK Sport Shock is the perfect solution for those looking for a straightforward, reliable damper setup that gains ground clearance, ride comfort and additional travel without requiring any additional suspension components. For optimal performance, PRO-TRUCK Sport Shocks are designed to be used in conjunction with Eibach PRO-LIFT-KIT springs.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Ford Ranger |
Showing 1 - 10 of 12 products
Loading...