Shop By Product Matching "AP"
Choose your Submodel for your 1992 Toyota Corolla
Image
Product
Price
- Autolite APP3924 Double Platinum Spark Plug
- Gap .032 (in)
- Double Platinum Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.526
- 13.36
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.75
- 19.05
- Center Electrode Tip Material: Platinum
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.007
- 50.98
-
Features:
- Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
- The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
- Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
- The multi-rib insulator prevents flash-over.
- Autolite® Double Platinum spark plugs have a platinum-to-platinum design that decreases gap erosion, reduces misfires, and provides improved durability*, leading to longer service life. It provides superior performance over copper and platinum plugs primarily used in distributorless ignition system (DIS) engines.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
101 000 035 AH, 101 905 611 G, 101 905 615 A, 101 905 616, 101 905 631 A, 12 12 0 030 548, 12 12 0 037 607, 12 12 0 141 871, 12 12 1 435 955, 12 12 9 071 003, 1290, 14F-7DPURX2, 176-5295, 176-5300, 18817-11051, 18818-11051, 22401-AA650, 22401-AA65A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Toyota Corolla | L | 1587 | 4 Cyl 1.6L | - |
- Autolite AP3924 Platinum Spark Plug
- Gap .032 (in)
- Platinum Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.526
- 13.36
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.75
- 19.05
- Center Electrode Tip Material: Platinum
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.007
- 50.98
-
Features:
- Engineered with a platinum firing tip that prevents gap erosion for longer service life.
- Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- The multi-rib insulator prevents flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
- Autolite® Platinum spark plugs are engineered with a platinum center electrode firing tip that provides improved performance and increased durability, making it a reliable choice for all older engine applications and designs. Its platinum design delivers quicker firing, smoother starts, for better acceleration, and improved fuel efficiency.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
1148, 14 FGH-8 DPURX2, 14 FR-7 KPUV, 1W4312405AB, 2U7E12405BA, 3005, 3071, 3071S, 413F, 413FSM, 4202, 6111, 71, 8001, 8007, 9, AGSP32C, AGSP32F...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Toyota Corolla | L | 1587 | 4 Cyl 1.6L | - |
- Champion Double Platinum - Boxed - RC12PYP
- Gap 0.032in; Plug Type RC12PYP
- Champion Double Platinum Power 7071 Spark Plug (Carton of 4)
- Double Platinum Power
- Product Attributes:
- Hex Size:
- 0.625
- 15.880
- Reach: 0.75
- Center Electrode Tip Material: Platinum
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Pre-Gap Size:
- 0.044
- 1.12
- Classification: Champion Double Platinum
- Ground Electrode Core Material: Platinum
- Insulator Height: 0.06
- Plug Type: Rc12pyp
- Hex Size:
- Champion® Double Platinum Power™ spark plugs deliver more powerful performance. Featuring exclusive Heat-Active™ alloy, platinum fine wire center electrode and platinum pad ground electrode provide maximum life and sharper spark focus.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
22401-27N66, 41-800, 41-801, 41-806, 41-807, 41-815, 4230, 4419, 9005, 9006, AGSP32PP, BCPR5EP8, BKR5EKPB11, BKR5EP11, BKR6EKPB11, BKR6EP11, BKR6EPB11, BKR6EYA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Toyota Corolla | L | 1587 | 4 Cyl 1.6L | - |
- 13" TRICO 30 Series Wiper Blade
- OE Design this is a 13'' 7mm Bayonet Conventional Wiper Blade oe: 8522022621; 8524223010
- Bayonet Arms (8);Large J-Hooks (2);Large Pin Arms (3);Small J-Hooks (6);Small Pin Arms (7)
- TRICO 30-Series Wiper Blade
- Product Attributes:
- Salability Restrictions: N
- Number of Wiping Edges: 1
- Blade Material: Natural Rubber
- Frame Material: Steel
- AAP_UDA_4: 110
- Pressure Point Quantity: 4
- Contains Electronic Components: No
- Engine Specific: N
- AAP_UDA_129: N
- Frame Color: Black
- AAP_UDA_125: N
- AAP_UDA_126: N
- AAP_UDA_127: N
- Is Item A Chemical: No
- Blade Type: Conventional
- Adapter Type: Pre-attached Adapter
- Adapters Required: Yes
- Snowmobile: N
- Personal Watercraft: N
- Winter Blade: No
- Is Or Contains A Battery: No
- Variable Speed: No
- Shipping Exclusions: N
- High Performance: Y
- Attached Spoiler/Aerofoil: No
- AAP_UDA_132: N
- California Proposition 65 Warning Type: N/a
- AAP_UDA_133: N
- Is Or Contains A Bulb: No
- Adapters Included: Yes
- Motorcycle ATV: N
- Non-Vehicle Specific: N
- AAP_UDA_130: Y
- AAP_UDA_131: N
- Wiper Blade Connection Type: 3/16 Side Lock, 7mm Bayonet, 7mm Hook, 8mm Hook, 9x3 Hook, 9x4 Hook, Pin Type Side Lock
- AAP_UDA_119: Y
- Transmission Specific: N
- Refillable: Yes
- Small Engine: N
-
Features:
- Available in retail and bulk packaging
- Universal Steel Frame Blade
- Precision-cut rubber edge creates superior clean windshield
- Pre-attached universal adaptor fits 9mm hook, 9x4 hook, side lock and bayonet arms
- Engineered to provide better windshield wrap
- Available in lengths from 11” to 28”
- The aerodynamic steel frame in TRICO 30-series wiper blades delivers exceptional strength and durability and is engineered to wrap to curved windshields.
This Part Fits the Following OEM/Substitute Numbers:
01113, 11131, 128-5040, 13, 13-51, 14C-13, 15-130, 170396, 1707396, 19192665, 20131, 256792-C91, 256792C91, 2580415, 2913191, 3-398-111-141, 30-130, 30-132RF...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 1992 - Toyota Corolla | Rear | Wagon |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 124
- 4.9
- End 1 Inside Diameter:
- .61
- 15
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- .61
- 15
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0491210631, 1, 10042686, 1010, 10120087, 122310, 12604942, 1333180, 1370436, 14-1725-8, 142-0801, 142-5941, 14207S, 1489658, 15115123, 15612108, 15665113, 15727639...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1992 - Toyota Corolla | L | 1587 | Heater To Valve | GAS | 4 Cyl 1.6L | - |
- WIX Spin-On Lube Filter
- Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.69
- Burst Pressure: 400
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 7-9 Gpm
- Media Material: Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
This Part Fits the Following OEM/Substitute Numbers:
0 986 452 017, 0 986 452 028, 0 986 452 035, 0 986 452 038, 0 986 452 060, 0 986 452 558, 0 986 452 907, 0 986 452 917, 0 986 452 928, 0 986 AF0 061, 0 986 AF0 149, 0 986 AF1 028, 0 986 B00 048, 0060290915005, 0082115, 0410670, 0410750, 0410759...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1992 - Toyota Corolla | L | 1587 | Canada | 4 Cyl 1.6L | - |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 34.625
- 879
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 34.124
- 867
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
0093821010, 1040340, 11287512762, 11720V7300, 11720V7301, 11720V7310, 11720V7311, 1192065E20, 14-0670-2, 141-1303, 141-1455, 146-040865, 146-040870, 164348, 1987947827, 200765, 202038, 202555...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1992 - Toyota Corolla | L | 1587 | Air Conditioning | GAS | 4 Cyl 1.6L | - |
- E3 Premium DiamondFIRE Power Automotive Spark Plug
- Product Attributes:
- Application Specific or Non-Application: Application Specific
- Electrode Core: Copper
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Part Type Name: Automotive Spark Plug
- Hex Size: 5/8
- Reach:
- 19.05
- 3/4
- Center Electrode Tip Material: Nickel
- Resistor: Resistor
- Bullet:
- Ecology - E3 Provides A Cleaner Burning Combustion, Which Translates Into Fuel Savings And Reduced Engine Carbon Deposits
- e3 Spark Plugs Are Pre-gapped At The Factory To Meet O.e. Requirements
- Efficiency - E3 "diamond Shaped" Side Wire Electrode Projects The Combustion Spark In A Way That More Quickly Ignites The Air/fuel Mixture, Thereby Creating A Significantly Faster And Longer Flame Kernel, More Fuel Is Put To Work With Less Waste; Creating
- Energy - Power Output Improved By 6% On Average In The Typical Operating Ranges-results Will Vary
- Smoother Acceleration & Idle - The Faster Flame Initiated By The E3 Spark Plug Results In A More Complete Burn Of The Ingested Fuel Charge. More Pressure Is Created Against The Piston More Fuel Is Put To Work
- Ecology - E3 Provides A Cleaner Burning Combustion, Which Translates Into Fuel Savings And Reduced Engine Carbon Deposits
- Spark Plug Approximate Resistor Value: 3500-7000
- Gap: Pre-gapped At The Factory To Meet O.e. Requirements; Gap Cannot Be Adjusted
- Pre-Gap Size:
- .040
- 1.016
- Electrode Tip: Nickel
- Insulator Height:
- 2.023
- 51.37
- Brand Name: E3 Spark Plugs
- Features & Benefits: E3 Spark Plugs Are The Product Of Years Of Fundamental Research In The Combustion Field. The Unique Patented Ground Electrode Configuration Increases The Amount Of Combustion Pressure Created During Each Power Stroke Of The Engine, Which Results In A Mar
- Seat Style: Gasket
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1041, 1148, 1266, 1269, 1273, 2089, 2097, 2215, 2249, 2251, 2288, 2330, 2341, 2355, 2372, 2441, 2684, 2687...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1992 - Toyota Corolla | L | 1587 | 4 Cyl 1.6L | Base | - |
- E3 Premium DiamondFIRE Power Automotive Spark Plug
- Product Attributes:
- Application Specific or Non-Application: Application Specific
- Electrode Core: Copper
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Part Type Name: Automotive Spark Plug
- Hex Size: 5/8
- Reach:
- 19.05
- 3/4
- Center Electrode Tip Material: Nickel
- Resistor: Resistor
- Bullet:
- Ecology - E3 Provides A Cleaner Burning Combustion, Which Translates Into Fuel Savings And Reduced Engine Carbon Deposits
- e3 Spark Plugs Are Pre-gapped At The Factory To Meet O.e. Requirements
- Efficiency - E3 "diamond Shaped" Side Wire Electrode Projects The Combustion Spark In A Way That More Quickly Ignites The Air/fuel Mixture, Thereby Creating A Significantly Faster And Longer Flame Kernel, More Fuel Is Put To Work With Less Waste; Creating
- Energy - Power Output Improved By 6% On Average In The Typical Operating Ranges-results Will Vary
- Smoother Acceleration & Idle - The Faster Flame Initiated By The E3 Spark Plug Results In A More Complete Burn Of The Ingested Fuel Charge. More Pressure Is Created Against The Piston More Fuel Is Put To Work
- Ecology - E3 Provides A Cleaner Burning Combustion, Which Translates Into Fuel Savings And Reduced Engine Carbon Deposits
- Spark Plug Approximate Resistor Value: 3500-7000
- Gap: Pre-gapped At The Factory To Meet O.e. Requirements; Gap Cannot Be Adjusted
- Pre-Gap Size:
- .040
- 1.016
- Electrode Tip: Nickel
- Insulator Height:
- 2.023
- 51.37
- Brand Name: E3 Spark Plugs
- Features & Benefits: E3 Spark Plugs Are The Product Of Years Of Fundamental Research In The Combustion Field. The Unique Patented Ground Electrode Configuration Increases The Amount Of Combustion Pressure Created During Each Power Stroke Of The Engine, Which Results In A Mar
- Seat Style: Gasket
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1992 - Toyota Corolla | L | 1587 | 4 Cyl 1.6L | LE | - |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .667
- 17
- Outside Circumference:
- 38.625
- 981
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 38.14
- 969
- Rib Quantity: 5
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
0514624, 07L903137T, 1050380, 1340724, 14-0643-8, 141-1474, 146-050970, 1676272, 202335, 204250, 204906, 25-050380, 25-050380HD, 25-75038, 279723126314, 3626788, 380K5, 380K5MK...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1992 - Toyota Corolla | L | 1587 | Water Pump and Alternator | GAS | 4 Cyl 1.6L | - |
Showing 1 - 10 of 17 products
Loading...