Shop By Product Matching "ATE"
Image
Product
Price
- Champion Copper Plus Small Engine- Boxed - RJ12C
- Resistor Type Gap 0.035in ; Plug Type RJ12C
- Champion Copper Plus Small Engine 592 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.813
- 20.650
- Reach: 0.375
- Center Electrode Tip Material: Nickel
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Pre-Gap Size:
- 0.030
- 0.76
- Classification: Champion Copper Plus Small Engine
- Ground Electrode Core Material: Nickel
- Plug Type: Rj12c
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
14-11, 14-11X, 7915, A11, A11X, AR10, AT10, AZ9, B2, C49, G4C, M47, RJ12C, W9U, WR10E, WR11EC0, WR9E, WR9EC...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - Chevrolet C10 Panel | L | - | 6 Cyl 3.9L | 235 |
- Autolite 295 Copper Spark Plug
- Non-Resistor Plug; Auto
- Copper Spark Plug
- Product Attributes:
- Center Electrode Insulator Tip Projection:
- 0.039
- 0.99
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Regular
- Core Nose Length:
- 0.633
- 16.08
- Washer Type: Flat
- Ground Electrode Tip Material: Nickel
- Skirt: Yes
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: No
- Indexed: No
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.03
- 0.76
- Ground Electrode Core Material: Nickel
- Center Electrode Projection: Short Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 13/16
- Reach:
- 0.374
- 9.5
- Center Electrode Tip Material: Nickel
- Skirt Length:
- 0.623
- 15.82
- Manufacturer Heat Range: 6
- Resistance: 1
- Insulator Height:
- 2.327
- 59.11
- Center Electrode Insulator Tip Projection:
-
Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Autolite® Copper spark plugs are engineered to deliver quick starts and the power your vehicle or applications needs to meet performance expectations.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
14-8 E, 14-9 EUO, 29693, 3210, 45, 45770-6, 46, 6008, 77-317, 8129840, 834230-MI, 841, 8411, 841S, 8U2J12405AXA, A7, A71, A7C...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - Chevrolet C10 Panel | L | - | 6 Cyl 3.9L | 235 |
- Autolite 295 Copper Spark Plug
- OE Style; Auto
- Copper Spark Plug
- Product Attributes:
- Center Electrode Insulator Tip Projection:
- 0.039
- 0.99
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Regular
- Core Nose Length:
- 0.633
- 16.08
- Washer Type: Flat
- Ground Electrode Tip Material: Nickel
- Skirt: Yes
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: No
- Indexed: No
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.03
- 0.76
- Ground Electrode Core Material: Nickel
- Center Electrode Projection: Short Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 13/16
- Reach:
- 0.374
- 9.5
- Center Electrode Tip Material: Nickel
- Skirt Length:
- 0.623
- 15.82
- Manufacturer Heat Range: 6
- Resistance: 1
- Insulator Height:
- 2.327
- 59.11
- Center Electrode Insulator Tip Projection:
-
Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Autolite® Copper spark plugs are engineered to deliver quick starts and the power your vehicle or applications needs to meet performance expectations.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - Chevrolet C10 Panel | L | - | 6 Cyl 3.9L | 235 |
- Autolite 295 Copper Spark Plug
- Gap .035 (in); Auto
- Copper Spark Plug
- Product Attributes:
- Center Electrode Insulator Tip Projection:
- 0.039
- 0.99
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Regular
- Core Nose Length:
- 0.633
- 16.08
- Washer Type: Flat
- Ground Electrode Tip Material: Nickel
- Skirt: Yes
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: No
- Indexed: No
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.03
- 0.76
- Ground Electrode Core Material: Nickel
- Center Electrode Projection: Short Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 13/16
- Reach:
- 0.374
- 9.5
- Center Electrode Tip Material: Nickel
- Skirt Length:
- 0.623
- 15.82
- Manufacturer Heat Range: 6
- Resistance: 1
- Insulator Height:
- 2.327
- 59.11
- Center Electrode Insulator Tip Projection:
-
Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Autolite® Copper spark plugs are engineered to deliver quick starts and the power your vehicle or applications needs to meet performance expectations.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - Chevrolet C10 Panel | L | - | 6 Cyl 3.9L | 235 |
- WIX Automatic Transmission Filter Kit
- Product Attributes:
- Inner Diameter Top: Closed
- Duty Type: Ld
- Class: D
- Automatic transmission filters feature design and construction that ensure no unfiltered fluid can bypass the application specific filtration media. Lock seamed and sealed assemblies and application specific sealing components ensure complete filtration. WIX transmission filter kits include sealing gaskets specifially designed for use with today's sophisticated transmission fluids
This Part Fits the Following OEM/Substitute Numbers:
1017AB, 107, 12360663, 13998, 14153, 14557, 217, 2229015, 347096, 34905K, 3711172, 3849968, 47A35G, 47K43G, 58883, 6017, 61658883, 6263001...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1962 - Chevrolet C10 Panel | L | - | United States | 6 Cyl 3.9L | 235 |
- with 2 Piece Rear Drive Shaft with 3.625in Outside Snap Ring Dimension 1.188in Bearing Cap Diameter 2 Piece Driveshaft Non-Greasable with Uncoated
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350/spl30
- Bearing Cap Diameter B (mm): 1.188
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.188
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Trans. Speed |
|---|---|---|
| 1962 - Chevrolet C10 Panel | Rear Driveshaft at Transmission | 4 |
- Universal Joint
- with 3.625in Outside Snap Ring Dimension with Uncoated 1.188in Bearing Cap Diameter 2 Piece Driveshaft Non-Greasable with 2 Piece Rear Drive Shaft
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Snap Ring (1): 3.625
- Snap Ring (2): 3.625
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350/spl30
- Bearing Cap Diameter B (mm): 1.188
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.188
- You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15-178X, 2-0052, 2-0053, 2-0053G, 2-0053P, 2-0799, 231, 232, 331, 331BL, 45U0103, 45U0109, 45U0123, 5-178X, UJ231, UJ232, UJ331, UJ331BL...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Trans. Speed | Drive Type |
|---|---|---|---|
| 1962 - Chevrolet C10 Panel | Rear Driveshaft at Transmission | 4 | RWD |
- Universal Joint Greaseable 1350 Series
- with 3.625in Outside Snap Ring Dimension 1.188in Bearing Cap Diameter 2 Piece Driveshaft Greaseable with 2 Piece Rear Drive Shaft
- FSGR
- Product Attributes:
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Osr
- Model Number: Spicer 1350 (spl30)
- Snap Ring (2): 3.625
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.188
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.188
- 30.175
- Bearing Cap Type: Round
- Snap Ring (1): 3.625
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350
- Bearing Cap Diameter B (mm):
- 1.188
- 30.175
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
00002422475, 01-0729-504, 02330781, 0270006410, 02706410, 04371-04080, 04371-0C080, 04371-0C081, 04371-0C082, 04371-0C090, 04371-0C093, 04371-0C094, 0437104080, 043710C080, 043710C081, 043710C082, 043710C090, 043710C093...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Trans. Speed | Drive Type |
|---|---|---|---|
| 1962 - Chevrolet C10 Panel | Rear Driveshaft at Transmission | 4 | RWD |
- Universal Joint Greaseable 1350 Series
- with 2 Piece Rear Drive Shaft with 3.625in Outside Snap Ring Dimension 1.188in Bearing Cap Diameter 2 Piece Driveshaft Greaseable
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1350 (spl30)
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.188
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.188
- 30.175
- Bearing Cap Type: Round
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350
- Bearing Cap Diameter B (mm):
- 1.188
- 30.175
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Trans. Speed |
|---|---|---|
| 1962 - Chevrolet C10 Panel | Rear Driveshaft at Transmission | 4 |
- Universal Joint Greaseable 1350 Series
- with 3.625in Outside Snap Ring Dimension 1.188in Bearing Cap Diameter Greaseable with 2 Piece Rear Driveshaft
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1350 (spl30)
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.188
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm): 30.175
- Bearing Cap Type: Round
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350
- Bearing Cap Diameter B (mm): 30.175
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
Additional Fitment Information:
| Vehicle | Position | Trans. Speed |
|---|---|---|
| 1962 - Chevrolet C10 Panel | Rear Driveshaft at Transmission | 4 |
Showing 1 - 10 of 29 products
Loading...