Shop By Product Matching "ATE"
Choose your Engine for your 1968 Chevrolet Corvette
Image
Product
Price
- Champion Copper Plus Small Engine- Boxed - J8C
- with 300 Horsepower Engine & Up Non-Resistor Type Gap 0.035in OE Type ; Plug Type J8C
- Champion Copper Plus Small Engine 841 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.813
- 20.650
- Reach: 0.375
- Center Electrode Tip Material: Nickel
- Seat Type: Flat
- Electrical Terminal Type: Removable Nut
- Pre-Gap Size:
- 0.030
- 0.76
- Classification: Champion Copper Plus Small Engine
- Ground Electrode Core Material: Nickel
- Plug Type: J8c
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
14-4, 14-5, 14-7, 14-7X, 4339491, 44, 45, 4907335, 77-317-1, 7809, 834225-MI, 834225MI, 834230-MI, 834230MI, A5, A5X, A7, A7C...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1968 - Chevrolet Corvette | V | 5358 | 8 Cyl 5.3L | 327 |
- 300 HP
- Product Attributes:
- Top Width: .44
- Outside Circumference:
- 1474.98
- 58.07
- Color: Black
- Banded Belt: N
- Standards: Sae J636, Sae J637
- Effective Length:
- 1460.50
- 57.50
- Belt Construction: Bottom Cog
- Minimum Operating Temperature:
- -35
- -37.2
- Material: Synthetic Rubber Compound
- Maximum Operating Temperature:
- 175
- 79.4
This Part Fits the Following OEM/Substitute Numbers:
07-1058, 10A1460, 13-575, 13-580, 13575, 1359742, 14042547, 1481114, 15-575, 15573, 15575, 15580, 15581, 15W575L, 1803209-C1, 1803222-C91, 1939275, 25-14603...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1968 - Chevrolet Corvette | V | 5358 | Air Conditioning | 8 Cyl 5.3L | 327 |
- w/P.S., 350 HP
- Product Attributes:
- Top Width: .44
- Outside Circumference:
- 1474.98
- 58.07
- Color: Black
- Banded Belt: N
- Standards: Sae J636, Sae J637
- Effective Length:
- 1460.50
- 57.50
- Belt Construction: Bottom Cog
- Minimum Operating Temperature:
- -35
- -37.2
- Material: Synthetic Rubber Compound
- Maximum Operating Temperature:
- 175
- 79.4
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1968 - Chevrolet Corvette | V | 5358 | Air Conditioning | 8 Cyl 5.3L | 327 |
- Autolite 85 Copper Spark Plug
- Gap .035 (in); Auto
- Copper Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Regular
- Core Nose Length:
- 0.775
- 19.69
- Washer Type: Flat
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 13/16
- Reach:
- 0.374
- 9.5
- Center Electrode Tip Material: Nickel
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.034
- 0.86
- Resistance: 4000
- Insulator Height:
- 2.46
- 62.48
-
Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Autolite® Copper spark plugs are engineered to deliver quick starts and the power your vehicle or applications needs to meet performance expectations.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1968 - Chevrolet Corvette | V | 5358 | 8 Cyl 5.3L | 327 |
- Autolite 85 Copper Spark Plug
- OE Style; Auto
- Copper Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Regular
- Core Nose Length:
- 0.775
- 19.69
- Washer Type: Flat
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 13/16
- Reach:
- 0.374
- 9.5
- Center Electrode Tip Material: Nickel
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.034
- 0.86
- Resistance: 4000
- Insulator Height:
- 2.46
- 62.48
-
Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Autolite® Copper spark plugs are engineered to deliver quick starts and the power your vehicle or applications needs to meet performance expectations.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
0 250 202 045, 05613090, 10, 137, 14 R-9 EUO, 19310654, 198, 25171346, 3036, 3332, 4339425, 437, 43S, 449, 44S, 5613090, 5613591, 5613845...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1968 - Chevrolet Corvette | V | - | 8 Cyl 5.4L | 327 |
- 2300 - 2500 RPM Stall
- Tork Master 2400 Torque Converter; 2300 - 2500 RPM Stall;
- Tork Master 2400 Torque Converter
- Product Attributes:
- Trans Year:
- 1965
- 1966
- 1967
- 1968
- 1969
- 1970
- 1971
- 1972
- 1973
- 1974
- 1975
- 1976
- 1977
- 1978
- 1979
- 1980
- 1981
- 1982
- 1983
- 1984
- 1985
- 1986
- 1987
- 1988
- 1989
- 1990
- 1991
- Automotive Item Grade: High Performance
- WARNING CA Proposition 65: No
- Bolt Circle Diameter: 10.750 In.
- Flexplate Change Needed: Yes
- Stall Speed (RPM): 2300-2500
- Furnace-Brazed: Yes
- Trans Model:
- Gm- Th350 (auto) 3 Speed
- Gm- Th375 (auto) 3 Speed
- Gm- Th375b (auto) 3 Speed
- Gm- Th400 (auto) 3 Speed
- Gm- Th425 (auto) 3 Speed
- Trans Year:
-
Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
- Washer Between Turbine and Cover
- The Tork Master 2400 fits 1965-91 GM TH400, 425, 375 and 1968-81 GM TH350, 375B (not 350C.) Dont let the exceptional value fool you into thinking Tork Master Converters are not packed with lots of quality features, making them the best value-priced street performance converters money can buy. These converters perform best when paired with stock to modified engines up to 350hp/350 ft lbs. of torque, and lighter weight applications, like street rods. The Tork Master will provide noticeably quicker launches and harder acceleration while maintaining normal daily driving qualities. Upgrades like a new precision alloy steel pump drive tube, needle thrust bearing when factory equipped, new thrust washer between turbine and cover when required, and pressure tested and fully balanced by expertly trained technicians. Notes: Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. Not recommended for big block, supercharged, plate-type nitrous oxide or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product. 10.75-inch bolt circle
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Transmission Manuf. Code | CID |
|---|---|---|---|---|---|
| 1968 - Chevrolet Corvette | V | 6998 | 8 Cyl 7.0L | THM375/M39 | 427 |
- Bearing Assembly Sealed Self-Aligning
This Part Fits the Following OEM/Substitute Numbers:
079466, 12351943, 15680264, 30-27200, 3724507, 614018, 614018SA, 614018SC, 900018, 907403, 907538, 907576, 907826, 907963, 908093, 908120, 908244, 908404...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | CID |
|---|---|---|---|---|---|
| 1968 - Chevrolet Corvette | V | 6998 | Manual | 8 Cyl 7.0L | 427 |
- NGK Standard Spark Plug
- 300 HP Gap 0.035" OE Equivalent Design
- Standard Spark Plug
- Product Attributes:
- Center Electrode Design: Standard
- Center Electrode Insulator Tip Projection:
- 0.04
- 1.0
- Washer Included: Yes
- Electrical Terminal Type: Removable Nut
- Grade Type: Standard Replacement
- Service Number: Br6s
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Br6s
- Resistor Type: Yes
- Stock Number: 3522
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .028
- 0.7
- Ground Electrode Core Material: Nickel
- Material Grade: Nickel/copper
- Center Electrode Projection: Non-projected
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 13/16"
- Reach:
- 0.375
- 9.5
- Center Electrode Tip Material: Nickel
- Skirt Length: 0.0
- Manufacturer Heat Range: 6
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.15
- 54.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
- NGK's OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- NGK Standard spark plugs (in the iconic NGK 'yellow box' packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK's legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 10
This Part Fits the Following OEM/Substitute Numbers:
0801021, 09482-00051, 102, 124, 13401-6771-6, 159010-00130, 159010-01110, 294, 29693, 3014, 302, 303, 304, 3075, 3076, 314, 315, 316...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1968 - Chevrolet Corvette | V | - | 8 Cyl 5.4L | 327 |
- NGK V-Power Spark Plug
- Exc 300 HP Gap 0.035" OE Equivalent Design
- V-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Standard
- Center Electrode Insulator Tip Projection:
- 0.16
- 4.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Xr5
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Xr5
- Resistor Type: Yes
- Stock Number: 3332
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .040
- 1.0
- Ground Electrode Core Material: Nickel
- Material Grade: Nickel/copper
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 13/16"
- Reach:
- 0.375
- 9.5
- Center Electrode Tip Material: Nickel
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.24
- 57.0
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- NGK's OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK's V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK's legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
14, 14C2, 1835132T, 3224, 3225, 3226, 3227, 3332, 7508, 84, 85, 85BP, AP303, AR32, AR42, AS42C, AS4C, AT42...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1968 - Chevrolet Corvette | V | - | 8 Cyl 5.4L | 327 |
- 205 Degrees F Higher Alternate Temperature Replacement
- Standard
This Part Fits the Following OEM/Substitute Numbers:
12T1F, 13352, 200-205, 20005, 33010, 3352, 383, 9200205, AT24013, S335205
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1968 - Chevrolet Corvette | V | 5358 | 8 Cyl 5.3L | 327 |
Showing 1 - 10 of 30 products
Loading...