Image
Product
Price
- To Inner Tie Rod; RH Thread
- Steering Tie Rod End; To Inner Tie Rod; RH Thread;
- Steering Tie Rod End
-
Features:
- Steering Tie Rod End
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Jeep Wrangler | Inner (At Connecting Rod) |
- Non-Greaseable Super Strength Universal Joint
- Non-Greasable Super Strength U-Joint
- MOOG 371 Non-Greaseable Super Strength Universal Joint for Jeep Wrangler
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- U-Joint Identification: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Grade Type: Premium
- Length Axis 1:
- 2.06
- 52.578
- Length Axis 2:
- 2.06
- 52.578
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- Greaseable: No
- Part Description: Universal Joint
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
1-0297, 1-0297BF, 10297, 10297BF, 10297G, 10298, 114-645, 114645, 114645B, 20139, 20193, 20193E, 20193P, 20716, 210-0297, 2100297, 2150297, 2150299...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Jeep Wrangler | Front Axle Shaft - Right Outer |
- Non-Greaseable Super Strength Universal Joint
- Non-Greasable Super Strength U-Joint
- MOOG 371 Non-Greaseable Super Strength Universal Joint for Jeep Wrangler
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- U-Joint Identification: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Grade Type: Premium
- Length Axis 1:
- 2.06
- 52.578
- Length Axis 2:
- 2.06
- 52.578
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- Greaseable: No
- Part Description: Universal Joint
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Jeep Wrangler | Front Axle Shaft - Left Outer |
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- Sandwich Adapter Engine Oil Cooler Kit
- Product Attributes:
- Adapter thread size: 3/4"-16, 13/16"-16, 18x1.5mm, 20x1.5mm, 22x1.5mm
- BTU: 21000
- Adapter o-ring size: 2-3/4, 3-1/2
- Cooler height: 8-7/16
- Cooler inlet dim: 8-1/2
- Adapter inlet size: 3/8 Npt
- Rated functional: 250psi Working / 300psi Burst Strength
- Cooler material: Aluminum
- Adapter thickness: 1-3/4, 2-1/8
-
Features:
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- A step up from the popular tube and fin design this aluminum plate and fin-based oil cooler kit not only reduces oil temperatures to help extend the life of lower end components and oil life, it also helps reduce coolant temperatures in the radiator and cooling system. This universal kit includes engine sandwich adapter, hose and everything you need to install on most passenger vehicles on the road today.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Jeep Wrangler | L | - | 4 Cyl 2.5L | 150 |
- WIX Automatic Transmission Filter Kit
- Original Equipment Part Number 3515966
- Product Attributes:
- Inner Diameter Top: Closed
- Duty Type: Ld
- Class: A
- Automatic transmission filters feature design and construction that ensure no unfiltered fluid can bypass the application specific filtration media. Lock seamed and sealed assemblies and application specific sealing components ensure complete filtration. WIX transmission filter kits include sealing gaskets specifially designed for use with today's sophisticated transmission fluids
This Part Fits the Following OEM/Substitute Numbers:
0440226, 103, 104, 104B, 12339136, 12360660, 12776D, 14169, 14942, 14943, 14944, 17470, 17957, 18032, 19950, 19968, 2229017, 230...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2002 - Jeep Wrangler | L | - | Mexico | 4 Cyl 2.5L | 150 |
- Universal Joint Greaseable 1310 Series OSR
- with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.062
- 26.975
- Bearing Cap Type: Round
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310
- Bearing Cap Diameter B (mm):
- 1.062
- 26.975
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Jeep Wrangler | Front Driveshaft - CV at Transfer Case |
- Universal Joint Greaseable 1310 Series OSR
- with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.062
- 26.975
- Bearing Cap Type: Round
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310
- Bearing Cap Diameter B (mm):
- 1.062
- 26.975
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Jeep Wrangler | Front Driveshaft at Front Axle |
- Universal Joint Greaseable 1310 Series OSR
- 1.062in Bearing Cap Diameter Greaseable with 3.219in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Osr
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.062
- 26.975
- Bearing Cap Type: Round
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310
- Bearing Cap Diameter B (mm):
- 1.062
- 26.975
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02362830, 031468, 04371-04010, 04371-04020, 04371-0C010, 0437104010, 0437104020, 043710C010, 04723072, 051025Z1546, 051025Z3207, 055-0737, 06-06-1242, 1-0153, 1-0153G, 1-0154, 1-0200, 1-0278...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Jeep Wrangler | Rear Driveshaft at Transmission |
- Universal Joint Greaseable 1310 Series OSR
- with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.062
- 26.975
- Bearing Cap Type: Round
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310
- Bearing Cap Diameter B (mm):
- 1.062
- 26.975
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Jeep Wrangler | Rear Driveshaft at Transmission |
- Custom Towed-Vehicle RV Wiring Harness; Select Jeep Wrangler TJ
- Connects Towed Vehicle To RV Using A Standard 4-Way Flat Trailer Plug
- CURT 58902 Custom Towed-Vehicle RV Wiring Harness for Dinghy Towing; Fits Select Jeep Wrangler TJ
- Towed-Vehicle RV Harness
-
Features:
- Connects A Towed Vehicle To An Rv Using A Standard 4-Way Flat
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- Diodes Isolate Sensitive Vehicle Electronics From RV Signal
- Uses VehicleS Existing Taillights
- Brake Lights And Turn Signals
- Towing your vehicle behind your RV is a great way to experience more of the adventure on your cross-country excursions. Whether youre towing a compact car or a full-size truck, CURT has the perfect solution to help you Bring It! CURT towed-vehicle RV harnesses are a vehicle-specific, plug-and-play solution to wiring your vehicle for dinghy towing. They use original-equipment-compatible connectors to plug into your vehicles wiring system without any cutting, splicing or soldering required. They provide a standard 4-way flat connector to plug into the RV socket and synchronize the vehicles tail lights, turn signals and brake lights with the RVs. Because each towed-vehicle RV harness has a vehicle-specific design, installation is fast and easy. This particular RV dinghy towing wiring harness is designed for specific years of the Jeep Wrangler TJ. CURT RV harnesses are also built to provide long-lasting operation. They feature integrated block diodes that protect the vehicles circuits from the RV signals. They isolate the sensitive vehicle electronics, keeping them from overheating and short circuiting. Every CURT towed-vehicle RV harness comes ready to install with all necessary hardware included. They also come with a 4-way flat extension to provide plenty of length to plug into the RV socket, as well as a connector mounting bracket to mount the connector on the vehicle.
Additional Fitment Information:
| Vehicle |
|---|
| 2002 - Jeep Wrangler |
Showing 1 - 10 of 16 products
Loading...