Shop By Product Matching "B&M"
Choose your Engine for your 1950 Pontiac Chieftain
Image
Product
Price
- Champion Copper Plus Small Engine- Boxed - RJ12C
- Resistor Type Gap 0.025in ; Plug Type RJ12C
- Champion Copper Plus Small Engine 592 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.813
- 20.650
- Reach: 0.375
- Center Electrode Tip Material: Nickel
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Pre-Gap Size:
- 0.030
- 0.76
- Classification: Champion Copper Plus Small Engine
- Ground Electrode Core Material: Nickel
- Plug Type: Rj12c
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
14-11, 14-11X, 7915, A11, A11X, AR10, AT10, AZ9, B2, C49, G4C, M47, RJ12C, W9U, WR10E, WR11EC0, WR9E, WR9EC...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1950 - Pontiac Chieftain | L | 4396 | 8 Cyl 4.4L | 268 |
- Champion Copper Plus Small Engine- Boxed - RJ12C
- Resistor Type Gap 0.025in ; Plug Type RJ12C
- Champion Copper Plus Small Engine 592 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.813
- 20.650
- Reach: 0.375
- Center Electrode Tip Material: Nickel
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Pre-Gap Size:
- 0.030
- 0.76
- Classification: Champion Copper Plus Small Engine
- Ground Electrode Core Material: Nickel
- Plug Type: Rj12c
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1950 - Pontiac Chieftain | L | 3920 | 6 Cyl 3.9L | 239 |
- Engine Coolant Outlet Gasket
- 2-1/2 (in) Inside Diameter
- FEL-PRO 35063 Engine Coolant Outlet Gasket for Dodge Challenger
- Product Attributes:
- Inside Diameter:
- 2.500
- 63.5
- Mounting Hole Quantity: 2
- Inside Diameter:
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1053ST, 11020, 110201, 1192735, 1343030, 1503091M1, 20963, 25140, 30963, 3128233, 3171856, 33631, 3830016, 41217, 494904, 50082, 6022, 677...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1950 - Pontiac Chieftain | L | 4396 | 8 Cyl 4.4L | 268 |
- Flex Radiator Hose
- Product Attributes:
- : 1.75
- Centerline Length: 18.75
- End 1 Inside Diameter: 1.75
This Part Fits the Following OEM/Substitute Numbers:
115, 1318, 1319, 2463606, 26431, 28742, 31741, 444291-C1, 511, 52818, 651157, 684264-R1, 7019, 71-01407, 718, 7M18, 81341, A628346-C5...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1950 - Pontiac Chieftain | L | 3920 | Lower | 6 Cyl 3.9L | 239 |
- Flex Radiator Hose
- Product Attributes:
- : 1.75
- Centerline Length: 16.50
- End 1 Inside Diameter: 1.75
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1950 - Pontiac Chieftain | L | 4396 | Lower | 8 Cyl 4.4L | 268 |
- Flex Radiator Hose
- Product Attributes:
- : 1.75
- Centerline Length: 16.50
- End 1 Inside Diameter: 1.75
This Part Fits the Following OEM/Substitute Numbers:
1.310.625, 100433, 100434, 128, 1316, 26430, 28727, 31701, 3899676, 510, 528012, 528013, 52816, 7016, 7017, 71-01405, 716, 7M16...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1950 - Pontiac Chieftain | L | 3920 | Upper | 6 Cyl 3.9L | 239 |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 18
- 457
- End 1 Inside Diameter:
- 1.75
- 44
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.75
- 44
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1950 - Pontiac Chieftain | L | 4396 | Upper | GAS | 8 Cyl 4.4L | 268 |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 18
- 457
- End 1 Inside Diameter:
- 1.75
- 44
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.75
- 44
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0516434000, 083, 1117227, 1274494, 1326235, 132691, 1330591, 14-1606-2, 1453013, 1461200, 1462573, 1462574, 1465546, 1468737, 1469370, 1471289, 1471552, 1471603...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1950 - Pontiac Chieftain | L | 4396 | Lower | GAS | 8 Cyl 4.4L | 268 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 18
- 457
- End 1 Inside Diameter:
- 1.75
- 44
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.75
- 44
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1950 - Pontiac Chieftain | L | 3920 | Lower | GAS | 6 Cyl 3.9L | 239 |
This Part Fits the Following OEM/Substitute Numbers:
1132897, 1200096, 1201928, 1201988, 13851X, 14014, 14665, 1502143M1, 15533265, 170696, 1751763M1, 2020D2, 202D2, 202OD2, 228852, 2288523, 300228, 302228...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | CID |
|---|---|---|---|---|---|
| 1950 - Pontiac Chieftain | L | 4396 | Manual | 8 Cyl 4.4L | 268 |
Showing 1 - 10 of 19 products
Loading...