Shop By Product Matching "B&M"
Choose your Engine for your 1954 Ford Mainline
Image
Product
Price
- Champion Copper Plus Small Engine- Boxed - H10C
- Non-Resistor Type Gap 0.030in ; Plug Type H10C
- Champion Copper Plus Small Engine 844 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.813
- 20.650
- Reach: 0.438
- Center Electrode Tip Material: Nickel
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Pre-Gap Size:
- 0.030
- 0.78
- Classification: Champion Copper Plus Small Engine
- Ground Electrode Core Material: Nickel
- Plug Type: H10c
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
14L7, 3B6583, 4504290, 45L, AL5, AL7, AL7C, AL7X, AL9, AL9X, ATL8, B4L, B6L, B6LY, C45L, H10C, M44L, SF21F...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1954 - Ford Mainline | V | 3917 | 8 Cyl 3.9L | 239 |
- Champion Copper Plus Small Engine- Boxed - H10C
- Non-Resistor Type Gap 0.030in ; Plug Type H10C
- Champion Copper Plus Small Engine 844 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.813
- 20.650
- Reach: 0.438
- Center Electrode Tip Material: Nickel
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Pre-Gap Size:
- 0.030
- 0.78
- Classification: Champion Copper Plus Small Engine
- Ground Electrode Core Material: Nickel
- Plug Type: H10c
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1954 - Ford Mainline | L | 3655 | 6 Cyl 3.6L | 223 |
- Flex Radiator Hose
- Product Attributes:
- : 1.75
- Centerline Length: 18.75
- End 1 Inside Diameter: 1.75
This Part Fits the Following OEM/Substitute Numbers:
115, 1318, 1319, 2463606, 26431, 28742, 31741, 444291-C1, 511, 52818, 651157, 684264-R1, 7019, 71-01407, 718, 7M18, 81341, A628346-C5...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1954 - Ford Mainline | L | 3655 | Lower | 6 Cyl 3.6L | 223 |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 33.84
- 853
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 33
- 838
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0029973092, 0114601, 0116200, 0119775, 0403331, 068121039L, 074903137, 082018381, 09433719, 0950838, 10-01619, 10-01783, 1002707, 10200210300, 10328, 10330, 1037, 10451442780...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1954 - Ford Mainline | L | 3655 | Power Steering | GAS | 6 Cyl 3.6L | 223 |
- Raybestos Element 3
- Product Attributes:
- Push Rod Included: Yes
- Mounting Hole Diameter: 0.334
- Bore Size: 1
- Reservoir Included: Yes
- Mounting Hole Quantity: 4
- Brake Booster Included: No
- Port Quantity: 1
- Primary Port Thread A: 1/2"-20
- Bleeder Hoses Included: No
- Master Cylinder Material: Iron
- Dust Boot Included: Yes
- Master Cylinder Cap Included: Yes
- Primary Outlet Thread Size: (1) 1/2-20
- Secondary Outlet Thread Size: Na
- Sensor Included: No
This Part Fits the Following OEM/Substitute Numbers:
03200299, 10-57583, 1028, 11078, 13-57583, 130.61078, 14740-C, 174-14, 18000, 2963, 3200299, 5461240, B5A2140A, B5A2140B, CM1442, F18000, F22040, F31567...VIEW MORE
Additional Fitment Information:
| Vehicle | Brakes |
|---|---|
| 1954 - Ford Mainline | Manual |
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
007311220A, 0320213-2, 051-4040, 092101, 10A574, 1138726, 1138975, 1139294, 130355, 1391-33-047, 15123, 15123/15245/Q, 15524, 15582, 155821, 164004, 171171, 171910...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1954 - Ford Mainline | Front Inner |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 15.1
- 384
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.5
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
021920, 046, 09844243, 0A0880, 100899, 101337, 11531711321, 1303X00, 134MFT1, 1365619, 14-1642-4, 142-5775, 142-5930, 1433180, 155613A, 15562826, 1616812, 1616813...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1954 - Ford Mainline | V | 4196 | Upper | GAS | 8 Cyl 4.2L | 256 |
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length: 305
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.5
- 38
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
This Part Fits the Following OEM/Substitute Numbers:
0385493, 10-18852, 1011, 10MF29301P7, 11530788175, 11531266469, 119688, 11MF2320P15, 1210, 1212, 125, 1303062, 1331723, 1372827, 1372828, 1390727, 145817, 153190...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1954 - Ford Mainline | V | 4196 | Upper | GAS | 8 Cyl 4.2L | 256 |
- Front Steering Tie Rod End
- 3.22 (in) Length
- MOOG ES416L Front Steering Tie Rod End
- Product Attributes:
- End 1 Threads Per Inch: 18
- End 2 Threads Per Inch: 20
- End 1 Thread Direction: Counterclockwise
- Type: Straight
- Part Description: Steering Tie Rod End
- End 1 Thread Diameter: 0.687
- Length - Stud Center to End: 3.120
-
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1954 - Ford Mainline | Front Outer |
- Front Steering Tie Rod End
- 3.22 (in) Length Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES416L Front Steering Tie Rod End
- Product Attributes:
- End 1 Threads Per Inch: 18
- End 2 Threads Per Inch: 20
- End 1 Thread Direction: Counterclockwise
- Type: Straight
- Part Description: Steering Tie Rod End
- End 1 Thread Diameter: 0.687
- Length - Stud Center to End: 3.120
-
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
03-81034, 11A3271, 269-2068, 269-2085, 269-2240, 310-220, 310220, 346754C92, 381034, 401-1096, 401-1096B, 4011096B, 45A0096, 46A0096A, 534-755, 626.65304, 802-416L, 868292R91...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1954 - Ford Mainline | Front Outer |
Showing 1 - 10 of 25 products
Loading...