Shop By Product Matching "B&M"
Image
Product
Price
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .47
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 36.62
- 930
- Construction: Notched
- Cross Section Designation: Hc50
- Effective Length: 914
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
000067014320, 0049977492, 0059970092, 0059977692, 0069976392, 0070163, 00938S8200, 0110034, 0200094, 0211786523, 0211789523, 0211790525, 0211790526, 0211791523, 027004128, 027068250, 034260849, 034260849C...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1969 - Toyota Pickup | L | 1898 | Fan and Generator | GAS | 4 Cyl 1.9L | - |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 11.4
- 290
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.25
- 32
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
001, 047121177, 0516062016, 0516062018, 09914048, 10032771, 108422, 1115010182, 1115010282, 11522415, 1260206, 1276A7, 1336294, 1337395, 14-1781-2, 140551E401, 140552B500, 142-0256...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1969 - Toyota Pickup | L | 1898 | Upper | GAS | 4 Cyl 1.9L | - |
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
007311220A, 0320213-2, 051-4040, 092101, 10A574, 1138726, 1138975, 1139294, 130355, 1391-33-047, 15123, 15123/15245/Q, 15524, 15582, 155821, 164004, 171171, 171910...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1969 - Toyota Pickup | Front Inner |
- Oil Filter
- H-5.063 in.; OD-3 in.; 3/4 In. - 16 Thread; psi Relief Valve 11-14
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 1.000 Lbs. (0.4 Kg)
- Product Box Height: 5.630 In. (143mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.250 In. (83mm)
- Package Material: Paperboard
- Product Box Length: 3.250 In. (83mm)
- PSI Relief Valve: 11-14
- Removal Nut: Yes
- Item Height: 5.063 In. (129mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1113566, 1220323, 1220445, 1220469, 1220800, 122A323, 122B323, 276217536, 276513, 277233, 4209146, 42532250, 47352, 480704, 507107, 507631, 51516, 51762...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1969 - Toyota Pickup |
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0241380, 0241380-5, 02413805, 0517381, 0517385, 05173850, 093725, 10A693, 1138725, 1138974, 1139293, 125X41, 15245, 15525, 171172, 171846, 171911, 176082H1...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1969 - Toyota Pickup | Front Inner |
- Open Design with Nippondenso Alternator with 30 Amp Alternator
This Part Fits the Following OEM/Substitute Numbers:
00625022-40, 008501504, 011055770, 053016202, 055844, 060162020, 068544, 085844, 1002947, 100835, 1009274, 10094, 1012, 10902221, 11009, 11009-8, 111-903-221, 11542920...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1969 - Toyota Pickup |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 36.43
- 925
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 35.6
- 904
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0026169000, 0039975592, 007753009502, 0119788, 01629, 0200097, 0211790013, 0211790513, 028145271F, 03-02-682-5, 046145271A, 046903137, 048903137, 050121039A, 05110243, 053903137, 068121039M, 0950900...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1969 - Toyota Pickup | L | 1898 | Generator | GAS | 4 Cyl 1.9L | - |
- LEVELING COMPRESSOR CONTROL SYSTEM
- 2nd Generation; Incl Compressor/Manifold/Control Box
- Includes Compressor/Manifold/Control Box
- WirelessAIR Leveling Compressor Control System
- Product Attributes:
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Dual-path control of all brands of air springs
- Heavy-duty 120 PSI 1.03 CFM 9% duty cycle 12V air compressor
- Control your air springs individually from anywhere, at any time
- Compact, wireless handheld controller with LCD display, programmable with up to three user-defined presets and free iOS and Android mobile app easily connects with Bluetooth -enabled manifold
- Easy installation with common mechanics tools
- Two-year limited warranty and 60 day, no questions asked, money-back guarantee
- Offering easy and convenient air pressure adjustment for any brand of aftermarket air spring, the WirelessAir on-board air compressor system from Air Lift is ideal for the elite air spring user. This dual-path WirelessAir(TM) allows users to inflate or deflate each air spring separately, this allows each air spring to be filled to different air pressures, to better handle uneven or top-heavy loads, all powered by a heavy-duty compressor. This second-generation system offers easy control of your air springs through an upgraded, wireless handheld controller or the new mobile app. Installing the system is simple, with no air line or wiring needing to be routed through the cab of the vehicle. The included wiring harness, installation hardware, and a fully illustrated instruction manual ensure that WirelessAir(TM) will be up and running in no time. WirelessAir(TM) is now available with the EZ Mount system, which packages the manifold and heavy-duty compressor into a factory-assembled and tested bracket, making installation even easier. Backed by Air Lift's two-year limited warranty and 60-day, no-questions-asked, money-back guarantee, WirelessAir(TM) can be purchased with peace of mind.
Additional Fitment Information:
| Vehicle |
|---|
| 1969 - Toyota Pickup |
- Oil Filter
- H-5.063 in.; OD-3.0 in.; 3/4 in. - 16 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Filter Material: High Flow Premium Media
- Removal Nut Size: 1.000 In.
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-17
- Item Height: 5.063 In. (129mm)
- Item Weight: 1.000 Lbs. (0.4 Kg)
- Package Type: Box
- Product Box Height: 5.750 In. (146mm)
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
056115561B, 056115561G, 06A115561B, 1062099C1, 11421266773, 1164626, 1172346, 1174417, 1220764, 140516010, 1520813201, 152099J1800, 15209J1800, 1521332090, 1521332091, 1526187, 1526188, 1560033010...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1969 - Toyota Pickup |
- Spark Plug Iridium Power
- Gap 0.044 Iridium Power - Performance Upgrade with World's Smallest Center Electrode (0.4 mm Dia.) & Tapered Tip Patented U-Groove Design & Patented Ir Alloy (90% Ir)
- Spark Plug Iridium Power
- Spark Plug - Iridium Power
- Product Attributes:
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Center Electrode Core Material: Copper
- Hex Size: 20.6
- Reach: 19.0
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Tapercut, U-groove
- Manufacturer Heat Range: 20
- Ground Configuration: Standard
- Pre-Gap Size: 1.1
- Resistance: 5000.0
- Ground Electrode Core Material: Nickel
- Thread Diameter: 14.0
- Increased performance with World's smallest Iridium Center Eletrode (0.4mm).
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0000-18-1690, 0000-18-B601, 003 159 46 03, 09482-00285, 09482-00299, 09482-00409, 09482-00421, 101 000 001 AC, 101 000 005 AB, 101 000 006 AF, 101 000 009 AA, 101 000 021 AA, 101 000 026 AA, 101 000 027 AA, 101 000 036 AA, 101 000 036 AB, 1346541-0, 1367528-0...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1969 - Toyota Pickup |
Showing 1 - 10 of 10 products
Loading...