Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Mazda 3 |
- 26" TRICO Tech Beam Wiper Blade
- Check for Spray Nozzle Interference OE Design this is a 26'' 9 x 3 In Arm (WSIA) Beam Wiper Blade oe: BCKA-67-330; BCKA67330; BDTS-67-330; BDTS67330
- 9mm Hook, 9x4 Hook, Side Pin (22mm), Side Pin (17mm), Pinch Tab, Push Button (22mm), Push Button (19mm)
- TRICO Tech Wiper Blade
- Product Attributes:
- Product Width (in): 1.535
- Salability Restrictions: N
- Product Weight (lb): 0.5000
- Blade Material: Natural Rubber
- AAP_UDA_4: 110
- Engine Specific: N
- ASIN Parent: B01d353p5a
- AAP_UDA_120: Y
- AAP_UDA_129: N
- Frame Color: Black
- AAP_UDA_125: N
- Blade Design: Memory Curve Steel Beam
- AAP_UDA_126: N
- AAP_UDA_127: N
- Adapter Type: Swift One-click
- AAP_UDA_33: 10555207
- Adapters Required: Yes
- Snowmobile: N
- Wiper Adaptor Title: Swift Easy Connection
- AAP_UDA_31: 326
- Shipping Exclusions: N
- High Performance: Y
- Is Or Contains A Bulb: No
- Adapters Included: Yes
- Non-Vehicle Specific: N
- Wiper Blade Connection Type: 7mm Hook, 8mm Hook, 9x3 Hook, 9x4 Hook, Pinch Tab, Pinch Tab Button, Push Button (19mm), Push Button (22mm), Side Pin (17mm), Side Pin (22mm)
- AAP_UDA_119: Y
- Product Height (in): 26.000
- Transmission Specific: N
- Refillable: No
- Small Engine: N
- AAP_UDA_22: 1
- Product Length/Depth (in): 1.000
- Number of Wiping Edges: 1
- Frame Material: Plastic/steel Blend
- Pressure Point Quantity: Infinite
- Contains Electronic Components: No
- Is Item A Chemical: No
- Blade Type: Beam
- AAP_UDA_12: Ea
- Car or Light Truck: Y
- Personal Watercraft: N
- Winter Blade: No
- Is Or Contains A Battery: No
- Variable Speed: No
- ASIN Child: B004a6fbpe
- Attached Spoiler/Aerofoil: Yes
- AAP_UDA_132: N
- California Proposition 65 Warning Type: N/a
- AAP_UDA_133: N
- Motorcycle ATV: N
- AAP_UDA_130: Y
- AAP_UDA_131: N
-
Features:
- Advanced Flexible Beam Blade
- Memory Curve Steel beam provides uniform pressure for the clearest wipe
- All-weather durability
- Exclusive Dual-Point coupler helps eliminate streaking
- Tested to perform over 1.5 million cycles
- Available in lengths from 13” to 29”
- TRICO Tech is a flexible beam wiper blades that allow your customers a step-up from a conventional windshield wiper blade to a premium beam blade technology at a great price. wiper replacement.
This Part Fits the Following OEM/Substitute Numbers:
17261, 19-260, 19260, 19426431, 26CA, 26HK, 26OE, 26OECA, 29-260, 32011026, 4826, 4843, 604487, 70-260, 700526WR, 8-9026, 836539, 91261...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 2019 - Mazda 3 | Front Left | Hatchback |
- 17" TRICO Tech Beam Wiper Blade
- Check for Spray Nozzle Interference OE Design this is a 17'' 9 x 3 In Arm (WSIA) Beam Wiper Blade oe: BCKB-67-330; BCKB67330; BDTT-67-330; BDTT67330
- 9mm Hook, 9x4 Hook, 3/16 Side Lock, 7mm Bayonet, Side Pin (22mm), Side Pin (17mm), Pinch Tab, Push Button (22mm), Push Button (19mm)
- TRICO Tech Wiper Blade
- Product Attributes:
- Product Width (in): 1.535
- Salability Restrictions: N
- Product Weight (lb): 0.1950
- Blade Material: Natural Rubber
- AAP_UDA_4: 110
- Engine Specific: N
- ASIN Parent: B01d353p5a
- AAP_UDA_120: Y
- AAP_UDA_129: N
- Frame Color: Black
- AAP_UDA_125: N
- Blade Design: Memory Curve Steel Beam
- AAP_UDA_126: N
- AAP_UDA_127: N
- Adapter Type: Swift One-click
- AAP_UDA_33: 10555199
- Adapters Required: Yes
- Snowmobile: N
- Wiper Adaptor Title: Swift Easy Connection
- AAP_UDA_31: 326
- Shipping Exclusions: N
- High Performance: Y
- Is Or Contains A Bulb: No
- Adapters Included: Yes
- Non-Vehicle Specific: N
- Wiper Blade Connection Type: 3/16 Side Lock, 7mm Bayonet, 7mm Hook, 8mm Hook, 9x3 Hook, 9x4 Hook, Pinch Tab, Pinch Tab Button, Push Button (19mm), Push Button (22mm), Side Pin (17mm), Side Pin (22mm)
- AAP_UDA_119: Y
- Product Height (in): 17.000
- Transmission Specific: N
- Refillable: No
- Small Engine: N
- AAP_UDA_22: 1
- Product Length/Depth (in): 1.000
- Number of Wiping Edges: 1
- Frame Material: Plastic/steel Blend
- Pressure Point Quantity: Infinite
- Contains Electronic Components: No
- Is Item A Chemical: No
- Blade Type: Beam
- AAP_UDA_12: Ea
- Car or Light Truck: Y
- Personal Watercraft: N
- Winter Blade: No
- Is Or Contains A Battery: No
- Variable Speed: No
- ASIN Child: B004a6d8iq
- Attached Spoiler/Aerofoil: Yes
- AAP_UDA_132: N
- California Proposition 65 Warning Type: N/a
- AAP_UDA_133: N
- Motorcycle ATV: N
- AAP_UDA_130: Y
- AAP_UDA_131: N
-
Features:
- Advanced Flexible Beam Blade
- Memory Curve Steel beam provides uniform pressure for the clearest wipe
- All-weather durability
- Exclusive Dual-Point coupler helps eliminate streaking
- Tested to perform over 1.5 million cycles
- Available in lengths from 13” to 29”
- TRICO Tech is a flexible beam wiper blades that allow your customers a step-up from a conventional windshield wiper blade to a premium beam blade technology at a great price. wiper replacement.
This Part Fits the Following OEM/Substitute Numbers:
17171, 17CA, 17HK, 17OE, 19-170, 19170, 19426424, 29-170, 32011017, 4817, 4836, 604480, 70-170, 700517WR, 8-9017, 836532, 91171, 97043...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 2019 - Mazda 3 | Front Right | Hatchback |
- 26" ANCO Profile Wiper Blade
- OE Design this is a 26'' 9 x 3 Hook Beam Wiper Blade
- 9mm Hook, 9x4 Hook, Side Pin (22mm), Side Pin (17mm), Pinch Tab, Push Button (22mm), Push Button (19mm)
- ANCO Profile Wiper Blade
- Product Attributes:
- Salability Restrictions: N
- Number of Wiping Edges: 1
- Frame Material: Plastic/steel Blend
- AAP_UDA_4: 110
- Pressure Point Quantity: Infinite
- Contains Electronic Components: No
- Engine Specific: N
- AAP_UDA_129: N
- Frame Color: Black
- AAP_UDA_125: N
- AAP_UDA_126: N
- AAP_UDA_127: N
- Is Item A Chemical: No
- Blade Type: Beam
- Adapter Type: Swift One-click
- Adapters Required: Yes
- Snowmobile: N
- Personal Watercraft: N
- Winter Blade: No
- Is Or Contains A Battery: No
- Variable Speed: No
- Shipping Exclusions: N
- High Performance: Y
- Attached Spoiler/Aerofoil: Yes
- AAP_UDA_132: N
- California Proposition 65 Warning Type: N/a
- AAP_UDA_133: N
- Is Or Contains A Bulb: No
- Adapters Included: Yes
- Motorcycle ATV: N
- Non-Vehicle Specific: N
- AAP_UDA_130: Y
- AAP_UDA_131: N
- Wiper Blade Connection Type: 7mm Hook, 8mm Hook, 9x3 Hook, 9x4 Hook, Pinch Tab, Pinch Tab Button, Push Button (19mm), Push Button (22mm), Side Pin (17mm), Side Pin (22mm)
- AAP_UDA_119: Y
- Transmission Specific: N
- Refillable: No
- Small Engine: N
-
Features:
- Symmetrical spoiler to allow for easy installation on vehicles with opposing wiper arm systems
- Articulated Contact Technology unique spoiler provides superior blade-to-windshield contact
- Low profile KwikConnect Installation System provides quick and easy wiper blade replacement
- Professional Beam Blade
- DuraKlear exclusive rubber compound provides a consistent streak-free wipe
- An affordable beam blade replacement that can also be used for vehicles originally equipped with a conventional style wiper blade
- ANCO Profile beam blades feature an infinite amount of pressure points for better blade-to-windshield contact. Featuring our patented Articulated Contact Technology and proprietary Kwik Connect Installation System – ANCO Profile is the affordable beam blade replacement that can also be used for vehicles originally equipped with a conventional style blade.
This Part Fits the Following OEM/Substitute Numbers:
18-260, 19-260, 2612B, 2615B, DLF26, NBC26
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Mazda 3 | Front Left |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Mazda 3 |
- WIX Spin-On Lube Filter
- Original Equipment Part Number 1WPE14302; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.685
- Duty Type: Ld
- Micron: 15.00
- Bypass Relief Valve Setting: 11-14
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: No
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
This Part Fits the Following OEM/Substitute Numbers:
1WPE14302, 1WPY-14-302, 27002, 2OMD007, 35-14 322 0007, 47002, 57002, 57002XP, 618-57002, 67002, 67002X, 7002, 716, 8-57002, 84002, 90118WB433, 90118WBA40, C-17410...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2019 - Mazda 3 | L | 1998 | Canada | 4 Cyl 2.0L | 122 |
- 26" TRICO 30 Series Wiper Blade
- Check for Spray Nozzle Interference Conventional Option this is a 26'' 9 x 3 In Arm (WSIA) Conventional Wiper Blade oe: BCKA-67-330; BCKA67330; BDTS-67-330; BDTS67330
- Bayonet Arms (8);Large J-Hooks (2);Large Pin Arms (3);Small J-Hooks (6);Small Pin Arms (7)
- TRICO 30-Series Wiper Blade
- Product Attributes:
- Salability Restrictions: N
- Number of Wiping Edges: 1
- Blade Material: Natural Rubber
- Frame Material: Steel
- AAP_UDA_4: 110
- Contains Electronic Components: No
- Engine Specific: N
- AAP_UDA_129: N
- Frame Color: Black
- AAP_UDA_125: N
- AAP_UDA_126: N
- AAP_UDA_127: N
- Is Item A Chemical: No
- Blade Type: Conventional
- Adapter Type: Pre-attached Adapter
- Adapters Required: Yes
- Snowmobile: N
- Personal Watercraft: N
- Winter Blade: No
- Is Or Contains A Battery: No
- Variable Speed: No
- Shipping Exclusions: N
- High Performance: Y
- Attached Spoiler/Aerofoil: No
- AAP_UDA_132: N
- California Proposition 65 Warning Type: N/a
- AAP_UDA_133: N
- Is Or Contains A Bulb: No
- Adapters Included: Yes
- Motorcycle ATV: N
- Non-Vehicle Specific: N
- AAP_UDA_130: Y
- AAP_UDA_131: N
- Wiper Blade Connection Type: 7mm Hook, 8mm Hook, 9x3 Hook, 9x4 Hook
- AAP_UDA_119: Y
- Transmission Specific: N
- Refillable: Yes
- Small Engine: N
-
Features:
- Available in retail and bulk packaging
- Available in lengths from 11” to 28”
- Universal Steel Frame Blade
- Precision-cut rubber edge creates superior clean windshield
- Pre-attached universal adaptor fits 9mm hook, 9x4 hook, side lock and bayonet arms
- Engineered to provide better windshield wrap
- The aerodynamic steel frame in TRICO 30-series wiper blades delivers exceptional strength and durability and is engineered to wrap to curved windshields.
This Part Fits the Following OEM/Substitute Numbers:
01126, 11261, 14C-26, 19192675, 20261, 26, 30-260, 30-262RF, 30-263PC, 31-26, 31-260, 3126, 3726, 40526, 500-26, 600-26, 700226, 8-4426...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 2019 - Mazda 3 | Front Left | Hatchback |
- 17" ANCO Profile Wiper Blade
- OE Design this is a 17'' 9 x 3 Hook Beam Wiper Blade
- 9mm Hook, 9x4 Hook, 3/16 Side Lock, 7mm Bayonet, Side Pin (22mm), Side Pin (17mm), Pinch Tab, Push Button (22mm), Push Button (19mm)
- ANCO Profile Wiper Blade
- Product Attributes:
- Salability Restrictions: N
- Number of Wiping Edges: 1
- Frame Material: Plastic/steel Blend
- AAP_UDA_4: 110
- Pressure Point Quantity: Infinite
- Contains Electronic Components: No
- Engine Specific: N
- AAP_UDA_129: N
- Frame Color: Black
- AAP_UDA_125: N
- AAP_UDA_126: N
- AAP_UDA_127: N
- Is Item A Chemical: No
- Blade Type: Beam
- Adapter Type: Swift One-click
- Adapters Required: Yes
- Snowmobile: N
- Personal Watercraft: N
- Winter Blade: No
- Is Or Contains A Battery: No
- Variable Speed: No
- Shipping Exclusions: N
- High Performance: Y
- Attached Spoiler/Aerofoil: Yes
- AAP_UDA_132: N
- California Proposition 65 Warning Type: N/a
- AAP_UDA_133: N
- Is Or Contains A Bulb: No
- Adapters Included: Yes
- Motorcycle ATV: N
- Non-Vehicle Specific: N
- AAP_UDA_130: Y
- AAP_UDA_131: N
- Wiper Blade Connection Type: 3/16 Side Lock, 7mm Bayonet, 7mm Hook, 8mm Hook, 9x3 Hook, 9x4 Hook, Pinch Tab, Pinch Tab Button, Push Button (19mm), Push Button (22mm), Side Pin (17mm), Side Pin (22mm)
- AAP_UDA_119: Y
- Transmission Specific: N
- Refillable: No
- Small Engine: N
-
Features:
- Symmetrical spoiler to allow for easy installation on vehicles with opposing wiper arm systems
- Low profile KwikConnect Installation System provides quick and easy wiper blade replacement
- Articulated Contact Technology unique spoiler provides superior blade-to-windshield contact
- DuraKlear exclusive rubber compound provides a consistent streak-free wipe
- An affordable beam blade replacement that can also be used for vehicles originally equipped with a conventional style wiper blade
- Professional Beam Blade
- ANCO Profile beam blades feature an infinite amount of pressure points for better blade-to-windshield contact. Featuring our patented Articulated Contact Technology and proprietary Kwik Connect Installation System – ANCO Profile is the affordable beam blade replacement that can also be used for vehicles originally equipped with a conventional style blade.
This Part Fits the Following OEM/Substitute Numbers:
1712B, 1715B, 18-170, 19-170, 35220, AS24T, DLF17, NBC17
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Mazda 3 | Front Right |
- FRAM, TG6607, Oil Filter
- Spin-on Oil Filter
- Tough Guard
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.266
- Non Slip Grip: Yes
- Gasket Thickness: 0.203
- Torque Nut: No
- Attachment Type: Spin-on
- Gasket Type: Base
- Housing Color: Silver
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 13
- Grade: Premium
- Gasket Outside Diameter: 2.531
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 15,000 miles (24,000 kilometers)
- Engineered for tough driving conditions, stop and go traffic, and hot and cold temperatures
- SureGrip® technology for easy install and removal
- Synthetic blend media provides 99% dirt holding capacity
- Silicone anti-drain back valve helps ensure safe engine start up
- FRAM Tough Guard® oil filters are designed for tough driving conditions, stop and go traffic, and hot and cold temperatures. The synthetic blend media is engineered to perform with conventional and synthetic motor oil. Equipped with SureGrip® technology, FRAM Tough Guard oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 15,000 miles (24,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
041-8136, 0B631-14-302, 115010-6370, 119305-35150, 119305-35151, 1230A040, 124450-35100, 132 180 0010, 1365, 150-1008, 150-1011, 15208-31U0C, 15208-65F00, 15208-65F01, 15208-65F0A, 15208-65F0B, 15208-65F0C, 15208-65F0D...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Mazda 3 | L | 1998 | 4 Cyl 2.0L | 122 |
- FRAM, PH6607, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 13
- Gasket Inside Diameter: 2.266
- Gasket Outside Diameter: 2.531
- Gasket Thickness: 0.203
-
Features:
- SureGrip® technology for easy install and removal
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- Silicone anti-drain back valve helps ensure safe engine start up
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
041-8136, 0B631-14-302, 115010-6370, 119305-35150, 119305-35151, 1230A040, 124450-35100, 132 180 0010, 1365, 150-1008, 150-1011, 15208-31U0C, 15208-65F00, 15208-65F01, 15208-65F0A, 15208-65F0B, 15208-65F0C, 15208-65F0D...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Mazda 3 | L | 1998 | 4 Cyl 2.0L | 122 |
Showing 1 - 10 of 11 products
Loading...