Shop By Product Matching "B&M"

Showing 1 - 10 of 45 products
Image
SKU
Product
Rating
Price

Schrader
  • Schrader EZ-sensor Snap-in
  • Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
  • Programmable for 314.9, 315 and 433MHz Applications
  • Product Attributes:
    • Washer Included: No
    • Mounting Hardware Included: Yes
    • Grommets Included: No
    • Manufacturer Warranty: 2 Years
    • California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
    • Recommended Torque (in/Lbs): 11.5 Inch/lbs.
    • Valve Stem Included: Yes
    • Monitor Type: Direct
    • Real Time Pressure Signal Transmission: Yes
    • Attachment Type:
      • Snap-fit
      • Snap-in
    • Mounting Location: Wheel
    • Valve Stem Material: Rubber
    • Programmed/Programmable: Programmable
    • Frequency: 315 / 314.9 / 433
    • Activation Type: Not Programmed, Programmable
    • Core Material: Nickel-coated
    • Recommended Torque (N-m): 1.3 N-m
    • Valve Cap Included: Yes
    • Valve Color: Black
    • Material: Rubber
    • Power Source: Battery
  • Features:
    • Easy to program and covers the majority of vehicles on the road in North America
    • Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
    • Engineered and manufactured to OEM design and quality specifcations
    • Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
    • Compatible with the majority of independent TPMS programming and diagnostic tools on the market
    • Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
    • Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
    • Sensor comes fully assembled and ready to program and install
    • Future-proofed OE quality TPMS product supports new and pending OE technologies
  • Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.

Additional Fitment Information:
Vehicle
2019 - Tesla X

Brembo
  • with # WVA 25743, 25744
  • PRIME Low-Met
  • Product Attributes:
    • Inner Pad Overall Thickness: 14.70
    • Grade Type: Premium
    • Outer Pad Overall Thickness: 14.70
    • Brake System: Brembo
    • Brake Lubricant Included:
      • No
      • Yes
    • Inner Pad Width: 107.20
    • Outer Pad Height: 69.20
    • Outer Pad Width: 107.20
    • Pad Shims Included: Yes
    • Inner Pad Height: 69.20
    • FMSI Number: 8805-d1270, 8545-d1428
    • Chamfered Edges: No
    • Friction Material Composition: Low-metallic
    • Pad Wear Sensor Type: Mechanical
    • Pad Wear Sensor Included: Yes
    • Prepared For Pad Wear Sensor: Yes
    • Weight: 1.52
  • They are sold as a set and only quantity 1 is required for both wheels

This Part Fits the Following OEM/Substitute Numbers:
105506800B, 1068331-00-B, 2574301, 583022MA10, 600645300A, 68144 432AA, 68144432AA, ASP1053, D1270 8805, D1425 8545, DG1270, EHT1428, FDB4777, PFB PF8805M, ZX1428

Additional Fitment Information:
Vehicle Position
2019 - Tesla X Rear

CMX
  • Front Rear Ceramic Brake Pads Kit For Tesla X Cadillac CTS S STS KCX-100300
  • With Brembo Calipers
  • CMX Front Rear Ceramic Brake Pads Kit For Tesla X Cadillac CTS S STS KCX-100300
  • CMX
  • Product Attributes:
    • WebNameEbay4: For Tesla X Cadillac Cts S Sts Front Rear Ceramic Brake Pads Kit
    • ComponentsSummaryRegularWithBrands: 2x Cmx Brake Pad Set
    • ComponentsSummaryShort: 2x Brake Pad
    • ComponentsSummaryLongWithBrands: 1x Front Ceramic Cmx Brake Pad Set + 1x Rear Ceramic Cmx Brake Pad Set (hardware Included)
    • WebNamePlain: Cmx Front Rear Ceramic Brake Pads Kit Kcx-100300
    • ComponentsSummaryShortWithBrands: 2x Cmx Brake Pad
    • NumberOfPieces: 2
    • ComponentsSummaryLong: 1x Front Ceramic Brake Pad Set + 1x Rear Ceramic Brake Pad Set (hardware Included)
    • WebNameLong: Cmx Front Rear Ceramic Brake Pads Kit For Tesla X Cadillac Cts S Sts Kcx-100300
    • WebNameShort: Front Rear Ceramic Brake Pads Kit For Tesla X Cadillac Cts S Sts Kcx-100300
    • ComponentsSummaryRegular: 2x Brake Pad Set
    • WebNameRegular: Cmx Front Rear Ceramic Brake Pads Kit For Tesla X Cadillac Cts S Sts Kcx-100300
    • WebNameEbay2: [front+rear] Ceramic Brake Pads Kit For Tesla X Cadillac Cts S Sts
    • WebNameEbay3: Ceramic Brake Pads Front Rear Kit For Tesla X Cadillac Cts S Sts
    • WebNameEbay: Front Rear Ceramic Brake Pads Kit For Tesla X Cadillac Cts S Sts Kcx-100300
  • Features:
    • Exclusive CeramiX™ High-Density Ceramic compound provides optimal braking performance (Stable Friction, High Temperature Stability, Extended Lifetime Durability) while maintaining low dust and noise
    • Rubberized Multi-Layer Stainless Steel Shim reduces noise, vibration, and harshness for complete quietness
    • Engineered with High Carbon SteelRX™ alloy (Pressure Resistant, Thermal Conductive) and dipped in an Anti-Rust Black Paint to increase durability
    • Precise laser-cut channel cut provides superior thermal stability and prevent overheating
    • Scorched for almost no break-in process required, raised initial cold effectiveness, and enhanced Pad-to-Rotor contact
    • Chamfered for mooth and gradual initial engagement on the rotor surface to prevent edge shifting
    • Proprietary One-Piece Integral Molding Technology improves the durability of the pads and extended the service life
    • Manufactured in ISO-certified facilities and 100% asbestos free
    • Kit Includes: 1x Front Ceramic Brake Pad Set + 1x Rear Ceramic Brake Pad Set (Hardware Included)
    • Part Reference Numbers : 1001A 1050B D1001A D1050B 7902 7942 7953 8526 8967 8968 9065 9078 7919 SG7953M SS7919M SS7953M SS8526M UP7902M UP7919M UP7953M UP8526M D1001 1001 7831 8805 9064 9132 7958 SG7958M PF7958M FT7958 QE7958M SS7831M SS79
  • As a leader in the Automotive Braking industry, CMX delivers unrivaled braking solutions that redefine performance, reliability, and safety for your vehicle. CMX offers a comprehensive range of cutting-edge brake components meticulously engineered to meet the demands of do-it-yourself customers, garages and large fleet operators. From high-performance brake pads and rotors, to durable brake drums, reliable brake wheel cylinders, state-of-the-art brake shoes and convenient brake kits, CMX has everything you need to elevate your vehicle's braking system. We delivers the highest standards of quality and reliability for your braking needs, enabling you to drive with confidence, precision, and peace of mind.
  • They are sold as a set and only quantity 1 is required for both wheels

This Part Fits the Following OEM/Substitute Numbers:
1001, 1001A, 1050B, 1053, 7831, 7902, 7919, 7942, 7953, 7958, 8526, 8805, 8967, 8968, 9064, 9065, 9078, 9132...VIEW MORE

Additional Fitment Information:
Vehicle Position
2019 - Tesla X Front and Rear

SIM
  • Semi-Metallic Disc Brake Pads For Honda Civic Subaru Impreza Mitsubishi Lancer
  • Semi-Metallic Disc Brake Pads SIM-1001 For Honda Civic Subaru Impreza Mitsubishi Lancer Ford Mustang Cadillac Chevrolet Tesla Hyundai Genesis Coupe ATS Camaro S Corvette CTS Volvo X Buick S60 Regal G8
  • SIM Semi-Metallic
  • Product Attributes:
    • WebNameEbay4: For Honda Civic Subaru Impreza Mitsubishi Semi-metallic Disc Brake Pads Sim-1001
    • Friction Material Attachment: Integrally Molded
    • Grade Type: Regular
    • ComponentsSummaryLongWithBrands: 1x Front Sim Disc Brake Pad Set
    • WebNamePlain: Semi-metallic Disc Brake Pads Sim-1001
    • ComponentsSummaryShortWithBrands: Sim Disc Brake Pad Set
    • Pad Shims Included: Yes
    • ComponentsSummaryLong: 1x Front Disc Brake Pad Set
    • FMSI Number: 7919
    • Friction Material Thickness Inner Pad: 9.5
    • Chamfered Edges: Yes
    • Friction Material Composition: Semi-metallic
    • WebNameShort: Semi-metallic Disc Brake Pads Sim-1001 For Honda Civic Subaru Impreza Mitsubishi Lancer Ford Mustang
    • WebNameEbay: Semi-metallic Disc Brake Pads For Honda Civic Subaru Impreza Mitsubishi Lancer S
    • Slotted: Yes
    • Friction Material Thickness Outer Pad: 9.5
    • ComponentsSummaryRegularWithBrands: Sim Disc Brake Pad Set
    • ComponentsSummaryShort: Disc Brake Pad Set
    • NumberOfPieces: 1
    • Abutment Clips Included: No
    • WebNameLong: Semi-metallic Disc Brake Pads Sim-1001 For Honda Civic Subaru Impreza Mitsubishi Lancer Ford Mustang Cadillac Chevrolet Tesla Hyundai Genesis Coupe Ats Camaro S Corvette Cts Volvo X Buick S60 Regal Xts Wrx Sti V70 Brz Pontiac G8 Sportback Sts Ct6 Toyota 8
    • ComponentsSummaryRegular: Disc Brake Pad Set
    • WebNameRegular: Semi-metallic Disc Brake Pads Sim-1001 For Honda Civic Subaru Impreza Mitsubishi Lancer Ford Mustang Cadillac Chevrolet Tesla Hyundai Genesis Coupe Ats Camaro S Corvette Cts Volvo X Buick S60 Regal G8
    • Pad Wear Sensor Included: No
    • WebNameEbay2: Semi-metallic Disc Brake Pads Sim-1001 For Honda Civic Subaru Impreza Lancer
    • WebNameEbay3: Semi-metallic Disc Brake Pads Sim-1001 For Honda Civic Subaru Impreza Mitsubishi
  • Features:
    • SIM Exclusive low-resin Semi-Metallic formula eliminates brake fade and glazing for optimal braking power
    • High density friction material to ensure a long pad life and excellent stopping power
    • Premium shims for provides increased strength and insulation against noise
    • Precise laser-cut channel cut provides superior thermal stability and prevent overheating
    • Improved new technology provides stable friction consistency, ensuring better braking performance
    • Chamfered for mooth and gradual initial engagement on the rotor surface to prevent edge shifting
    • Scorched for almost no break-in process required and raised initial cold effectiveness
    • Post-cured, high temperature, thermo-processed pads means no break-in required
    • Manufactured in ISO-Certified Installations and without asbestos
    • Part Reference Numbers : 1001A 1050B D1001A D1050B 7902 7942 7953 8526 8967 8968 9065 9078 7919 SG7953M SS7919M SS7953M SS8526M UP7902M UP7919M UP7953M UP8526M D1001 1001
  • SIM offers the utilmate semi-metallic brake pads on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by SIM certified engineers.
  • They are sold as a set and only quantity 1 is required for both wheels

This Part Fits the Following OEM/Substitute Numbers:
1001, 1001A, 1050B, 7902, 7919, 7942, 7953, 8526, 8967, 8968, 9065, 9078, D1001, D1001A, D1050B, SG7953M, SS7919M, SS7953M...VIEW MORE

Additional Fitment Information:
Vehicle Position
2019 - Tesla X Front

CMX
  • Ceramic Disc Brake Pads For Honda Civic Subaru Impreza Mitsubishi Lancer Ford S
  • Ceramic Disc Brake Pads CMX-D1001 For Honda Civic Subaru Impreza Mitsubishi Lancer Ford Mustang Cadillac Chevrolet Tesla Hyundai Genesis Coupe ATS Camaro S Corvette CTS Volvo X Buick S60 Regal XTS WRX
  • CMX Ceramic
  • Product Attributes:
    • WebNameEbay4: For Honda Civic Subaru Impreza Mitsubishi Ford Ceramic Disc Brake Pads Cmx-d1001
    • Friction Material Attachment: Integrally Molded
    • Grade Type: Regular
    • ComponentsSummaryLongWithBrands: 1x Front Cmx Disc Brake Pad Set
    • WebNamePlain: Ceramic Disc Brake Pads Cmx-d1001
    • ComponentsSummaryShortWithBrands: Cmx Disc Brake Pad Set
    • Pad Shims Included: Yes
    • ComponentsSummaryLong: 1x Front Disc Brake Pad Set
    • FMSI Number: 7919
    • Friction Material Thickness Inner Pad: 9.5
    • Chamfered Edges: Yes
    • Friction Material Composition: Ceramic
    • WebNameShort: Ceramic Disc Brake Pads Cmx-d1001 For Honda Civic Subaru Impreza Mitsubishi Lancer Ford Mustang Ats
    • WebNameEbay: Ceramic Disc Brake Pads For Honda Civic Subaru Impreza Mitsubishi Lancer Ford S
    • Slotted: Yes
    • Friction Material Thickness Outer Pad: 9.5
    • ComponentsSummaryRegularWithBrands: Cmx Disc Brake Pad Set
    • ComponentsSummaryShort: Disc Brake Pad Set
    • NumberOfPieces: 1
    • Abutment Clips Included: No
    • WebNameLong: Ceramic Disc Brake Pads Cmx-d1001 For Honda Civic Subaru Impreza Mitsubishi Lancer Ford Mustang Cadillac Chevrolet Tesla Hyundai Genesis Coupe Ats Camaro S Corvette Cts Volvo X Buick S60 Regal Xts Wrx Sti V70 Brz Pontiac G8 Sportback Sts Ct6 Toyota 86 Gt
    • ComponentsSummaryRegular: Disc Brake Pad Set
    • WebNameRegular: Ceramic Disc Brake Pads Cmx-d1001 For Honda Civic Subaru Impreza Mitsubishi Lancer Ford Mustang Cadillac Chevrolet Tesla Hyundai Genesis Coupe Ats Camaro S Corvette Cts Volvo X Buick S60 Regal Xts Wrx
    • Pad Wear Sensor Included: No
    • WebNameEbay2: Ceramic Disc Brake Pads Cmx-d1001 For Honda Civic Subaru Impreza Mitsubishi S
    • WebNameEbay3: Ceramic Disc Brake Pads Cmx-d1001 For Honda Civic Subaru Impreza Mitsubishi Ford
  • Features:
    • Exclusive CeramiX™ High-Density Ceramic compound provides optimal braking performance (Stable Friction, High Temperature Stability, Extended Lifetime Durability) while maintaining low dust and noise
    • Rubberized Multi-Layer Stainless Steel Shim reduces noise, vibration, and harshness for complete quietness
    • Engineered with High Carbon SteelRX™ alloy (Pressure Resistant, Thermal Conductive) and dipped in an Anti-Rust Black Paint to increase durability
    • Precise laser-cut channel cut provides superior thermal stability and prevent overheating
    • Scorched for almost no break-in process required, raised initial cold effectiveness, and enhanced Pad-to-Rotor contact
    • Chamfered for mooth and gradual initial engagement on the rotor surface to prevent edge shifting
    • Proprietary One-Piece Integral Molding Technology improves the durability of the pads and extended the service life
    • Manufactured in ISO-certified facilities and 100% asbestos free
    • Part Reference Numbers : 1001A 1050B D1001A D1050B 7902 7942 7953 8526 8967 8968 9065 9078 7919 SG7953M SS7919M SS7953M SS8526M UP7902M UP7919M UP7953M UP8526M D1001 1001
  • As a leader in the Automotive Braking industry, CMX delivers unrivaled braking solutions that redefine performance, reliability, and safety for your vehicle. CMX offers a comprehensive range of cutting-edge brake components meticulously engineered to meet the demands of do-it-yourself customers, garages and large fleet operators. From high-performance brake pads and rotors, to durable brake drums, reliable brake wheel cylinders, state-of-the-art brake shoes and convenient brake kits, CMX has everything you need to elevate your vehicle's braking system. We delivers the highest standards of quality and reliability for your braking needs, enabling you to drive with confidence, precision, and peace of mind.
  • They are sold as a set and only quantity 1 is required for both wheels

This Part Fits the Following OEM/Substitute Numbers:
1001, 1001A, 1050B, 7902, 7919, 7942, 7953, 8526, 8967, 8968, 9065, 9078, D1001, D1001A, D1050B, SG7953M, SS7919M, SS7953M...VIEW MORE

Additional Fitment Information:
Vehicle Position
2019 - Tesla X Front

TEC
  • Front Rear Ceramic Brake Pads Kit For Tesla X S With Single Piston Caliper
  • With Single Piston Rear Caliper
  • TEC Front Rear Ceramic Brake Pads Kit For 2017-2020 Tesla X S With Single Piston Caliper KTC-100729
  • TEC
  • Product Attributes:
    • WebNameEbay4: For Tesla X S With Single Piston Rear Caliper Front Ceramic Brake Pads Kit
    • ComponentsSummaryRegularWithBrands: 2x Tec Brake Pad Set
    • ComponentsSummaryShort: 2x Brake Pad
    • ComponentsSummaryLongWithBrands: 1x Front Ceramic Tec Brake Pad Set + 1x Rear Ceramic Tec Brake Pad Set (hardware Included)
    • WebNamePlain: Tec Front Rear Ceramic Brake Pads Kit Ktc-100729
    • ComponentsSummaryShortWithBrands: 2x Tec Brake Pad
    • NumberOfPieces: 2
    • ComponentsSummaryLong: 1x Front Ceramic Brake Pad Set + 1x Rear Ceramic Brake Pad Set (hardware Included)
    • WebNameLong: Tec Front Rear Ceramic Brake Pads Kit For 2017-2020 Tesla X S With Single Piston Caliper Ktc-100729
    • WebNameShort: Front Rear Ceramic Brake Pads Kit For 2017-2020 Tesla X S With Single Piston Caliper Ktc-100729
    • ComponentsSummaryRegular: 2x Brake Pad Set
    • WebNameRegular: Tec Front Rear Ceramic Brake Pads Kit For 2017-2020 Tesla X S With Single Piston Caliper Ktc-100729
    • WebNameEbay2: [front+rear] Ceramic Brake Pad Kit For Tesla X S With Single Piston Rear Caliper
    • WebNameEbay3: Ceramic Brake Pads Front Rear Kit For Tesla X S With Single Piston Caliper
    • WebNameEbay: Front Rear Ceramic Brake Pads Kit For Tesla X S With Single Piston Caliper
  • Features:
    • Exclusive SilentGrip™ Low Resin Ceramic formula provides superior braking performance (Smooth Friction, Extreme Temperature Stability, Quicker Compound Cooling) while maintaining low dust and noise
    • Fiber-Reinforced Multi-Layer Shim with rubber core eliminates noise, vibration, and harshness for complete quietness
    • Engineered with High Carbon SteelRX™ alloy (Pressure Resistant, Thermal Conductive) and dipped in an Anti-Rust Black Paint to improve durability
    • Scorched for almost no break-in process required, raised initial cold effectiveness and enhanced Pad-to-Rotor contact
    • Chamfered for mooth and gradual initial engagement on the rotor surface to prevent edge shifting
    • One-Piece Integral Molding Technology improve durability of the pads and extended the service life
    • Manufactured in ISO-Certified Installations and 100% Asbestos free
    • Premium Stainless-Steel hardware included (when required by the application)
    • Kit Includes: 1x Front Ceramic Brake Pad Set + 1x Rear Ceramic Brake Pad Set (Hardware Included)
    • Part Reference Numbers : 1001A 1050B D1001A D1050B 7902 7942 7953 8526 8967 8968 9065 9078 7919 SG7953M SS7919M SS7953M SS8526M UP7902M UP7919M UP7953M UP8526M D1001 1001 SCD1001 9409 D2164 2164 SCD2164
  • With their highly acclaimed SilentGrip™ Low Resin Ceramic formula, TEC has been dominating the brake pad market in North America for over 25 years. Their reputation was built over the years by delivering exceptional brake pads that meet the highest standards of performance, durability and reliability. With a long-established presence in the industry, TEC has garnered the trust and loyalty of countless customers across the continent. Their brake pads are known for their superior quality, providing reliable braking power, low dust, and quiet operation. TEC's commitment to excellence has solidified their position as the go-to brand for drivers and jobbers seeking convenient brake pads in North America.
  • They are sold as a set and only quantity 1 is required for both wheels

This Part Fits the Following OEM/Substitute Numbers:
1001, 1001A, 1050B, 2164, 7902, 7919, 7942, 7953, 8526, 8967, 8968, 9065, 9078, 9409, D1001, D1001A, D1050B, D2164...VIEW MORE

Additional Fitment Information:
Vehicle Position
2019 - Tesla X Front and Rear

TEC
  • Front Rear Ceramic Brake Pads Kit For Tesla X Cadillac CTS S STS KTC-100001
  • With Brembo Calipers
  • TEC Front Rear Ceramic Brake Pads Kit For Tesla X Cadillac CTS S STS KTC-100001
  • TEC
  • Product Attributes:
    • WebNameEbay4: For Tesla X Cadillac Cts S Sts Front Rear Ceramic Brake Pads Kit
    • ComponentsSummaryRegularWithBrands: 2x Tec Brake Pad Set
    • ComponentsSummaryShort: 2x Brake Pad
    • ComponentsSummaryLongWithBrands: 1x Front Ceramic Tec Brake Pad Set + 1x Rear Ceramic Tec Brake Pad Set (hardware Included)
    • WebNamePlain: Tec Front Rear Ceramic Brake Pads Kit Ktc-100001
    • ComponentsSummaryShortWithBrands: 2x Tec Brake Pad
    • NumberOfPieces: 2
    • ComponentsSummaryLong: 1x Front Ceramic Brake Pad Set + 1x Rear Ceramic Brake Pad Set (hardware Included)
    • WebNameLong: Tec Front Rear Ceramic Brake Pads Kit For Tesla X Cadillac Cts S Sts Ktc-100001
    • WebNameShort: Front Rear Ceramic Brake Pads Kit For Tesla X Cadillac Cts S Sts Ktc-100001
    • ComponentsSummaryRegular: 2x Brake Pad Set
    • WebNameRegular: Tec Front Rear Ceramic Brake Pads Kit For Tesla X Cadillac Cts S Sts Ktc-100001
    • WebNameEbay2: [front+rear] Ceramic Brake Pads Kit For Tesla X Cadillac Cts S Sts
    • WebNameEbay3: Ceramic Brake Pads Front Rear Kit For Tesla X Cadillac Cts S Sts
    • WebNameEbay: Front Rear Ceramic Brake Pads Kit For Tesla X Cadillac Cts S Sts Ktc-100001
  • Features:
    • Exclusive SilentGrip™ Low Resin Ceramic formula provides superior braking performance (Smooth Friction, Extreme Temperature Stability, Quicker Compound Cooling) while maintaining low dust and noise
    • Fiber-Reinforced Multi-Layer Shim with rubber core eliminates noise, vibration, and harshness for complete quietness
    • Engineered with High Carbon SteelRX™ alloy (Pressure Resistant, Thermal Conductive) and dipped in an Anti-Rust Black Paint to improve durability
    • Scorched for almost no break-in process required, raised initial cold effectiveness and enhanced Pad-to-Rotor contact
    • Precise laser-cut channel cut provides superior thermal stability and prevent overheating
    • Chamfered for mooth and gradual initial engagement on the rotor surface to prevent edge shifting
    • One-Piece Integral Molding Technology improve durability of the pads and extended the service life
    • Manufactured in ISO-Certified Installations and 100% Asbestos free
    • Kit Includes: 1x Front Ceramic Brake Pad Set + 1x Rear Ceramic Brake Pad Set (Hardware Included)
    • Part Reference Numbers : 1001A 1050B D1001A D1050B 7902 7942 7953 8526 8967 8968 9065 9078 7919 SG7953M SS7919M SS7953M SS8526M UP7902M UP7919M UP7953M UP8526M D1001 1001 SCD1001 7831 8805 9064 9132 7958 SG7958M PF7958M FT7958 QE7958M SS78
  • With their highly acclaimed SilentGrip™ Low Resin Ceramic formula, TEC has been dominating the brake pad market in North America for over 25 years. Their reputation was built over the years by delivering exceptional brake pads that meet the highest standards of performance, durability and reliability. With a long-established presence in the industry, TEC has garnered the trust and loyalty of countless customers across the continent. Their brake pads are known for their superior quality, providing reliable braking power, low dust, and quiet operation. TEC's commitment to excellence has solidified their position as the go-to brand for drivers and jobbers seeking convenient brake pads in North America.
  • They are sold as a set and only quantity 1 is required for both wheels

This Part Fits the Following OEM/Substitute Numbers:
1001, 1001A, 1050B, 1053, 7831, 7902, 7919, 7942, 7953, 7958, 8526, 8805, 8967, 8968, 9064, 9065, 9078, 9132...VIEW MORE

Additional Fitment Information:
Vehicle Position
2019 - Tesla X Front and Rear

TEC
  • Ceramic Disc Brake Pads For Honda Civic Subaru Impreza Mitsubishi Lancer Ford S
  • TEC Ceramic Disc Brake Pads TEC-1001 For Honda Civic Subaru Impreza Mitsubishi Lancer Ford Mustang Cadillac Chevrolet Tesla Hyundai Genesis Coupe ATS Camaro S Corvette CTS Volvo X Buick S60 Regal XTS
  • TEC Ceramic
  • Product Attributes:
    • WebNameEbay4: For Honda Civic Subaru Impreza Mitsubishi Ford Ceramic Disc Brake Pads Tec-1001
    • Friction Material Attachment: Integrally Molded
    • Grade Type: Regular
    • ComponentsSummaryLongWithBrands: 1x Front Tec Disc Brake Pad Set
    • WebNamePlain: Tec Ceramic Disc Brake Pads Tec-1001
    • ComponentsSummaryShortWithBrands: Tec Disc Brake Pad Set
    • Pad Shims Included: Yes
    • ComponentsSummaryLong: 1x Front Disc Brake Pad Set
    • FMSI Number: 7919
    • Friction Material Thickness Inner Pad: 9.5
    • Chamfered Edges: Yes
    • Friction Material Composition: Ceramic
    • WebNameShort: Ceramic Disc Brake Pads Tec-1001 For Honda Civic Subaru Impreza Mitsubishi Lancer Ford Mustang Tesla
    • WebNameEbay: Ceramic Disc Brake Pads For Honda Civic Subaru Impreza Mitsubishi Lancer Ford S
    • Slotted: No
    • Friction Material Thickness Outer Pad: 9.5
    • ComponentsSummaryRegularWithBrands: Tec Disc Brake Pad Set
    • ComponentsSummaryShort: Disc Brake Pad Set
    • NumberOfPieces: 1
    • Abutment Clips Included: No
    • WebNameLong: Tec Ceramic Disc Brake Pads Tec-1001 For Honda Civic Subaru Impreza Mitsubishi Lancer Ford Mustang Cadillac Chevrolet Tesla Hyundai Genesis Coupe Ats Camaro S Corvette Cts Volvo X Buick S60 Regal Xts Wrx Sti V70 Brz Pontiac G8 Sportback Sts Ct6 Toyota 86
    • ComponentsSummaryRegular: Disc Brake Pad Set
    • WebNameRegular: Tec Ceramic Disc Brake Pads Tec-1001 For Honda Civic Subaru Impreza Mitsubishi Lancer Ford Mustang Cadillac Chevrolet Tesla Hyundai Genesis Coupe Ats Camaro S Corvette Cts Volvo X Buick S60 Regal Xts
    • Pad Wear Sensor Included: No
    • WebNameEbay2: Ceramic Disc Brake Pads Tec-1001 For Honda Civic Subaru Impreza Mitsubishi S
    • WebNameEbay3: Ceramic Disc Brake Pads Tec-1001 For Honda Civic Subaru Impreza Mitsubishi Ford
  • Features:
    • Exclusive SilentGrip™ Low Resin Ceramic formula provides superior braking performance (Smooth Friction, Extreme Temperature Stability, Quicker Compound Cooling) while maintaining low dust and noise
    • Fiber-Reinforced Multi-Layer Shim with rubber core eliminates noise, vibration, and harshness for complete quietness
    • Engineered with High Carbon SteelRX™ alloy (Pressure Resistant, Thermal Conductive) and dipped in an Anti-Rust Black Paint to improve durability
    • Scorched for almost no break-in process required, raised initial cold effectiveness and enhanced Pad-to-Rotor contact
    • Chamfered for mooth and gradual initial engagement on the rotor surface to prevent edge shifting
    • One-Piece Integral Molding Technology improve durability of the pads and extended the service life
    • Manufactured in ISO-Certified Installations and 100% Asbestos free
    • Part Reference Numbers : 1001A 1050B D1001A D1050B 7902 7942 7953 8526 8967 8968 9065 9078 7919 SG7953M SS7919M SS7953M SS8526M UP7902M UP7919M UP7953M UP8526M D1001 1001 SCD1001
  • With their highly acclaimed SilentGrip™ Low Resin Ceramic formula, TEC has been dominating the brake pad market in North America for over 25 years. Their reputation was built over the years by delivering exceptional brake pads that meet the highest standards of performance, durability and reliability. With a long-established presence in the industry, TEC has garnered the trust and loyalty of countless customers across the continent. Their brake pads are known for their superior quality, providing reliable braking power, low dust, and quiet operation. TEC's commitment to excellence has solidified their position as the go-to brand for drivers and jobbers seeking convenient brake pads in North America.
  • They are sold as a set and only quantity 1 is required for both wheels

This Part Fits the Following OEM/Substitute Numbers:
1001, 1001A, 1050B, 7902, 7919, 7942, 7953, 8526, 8967, 8968, 9065, 9078, D1001, D1001A, D1050B, SCD1001, SG7953M, SS7919M...VIEW MORE

Additional Fitment Information:
Vehicle Position
2019 - Tesla X Front

Positive Plus
  • Semi-Metallic Disc Brake Pads For Honda Civic Subaru Impreza Mitsubishi Lancer
  • Semi-Metallic Disc Brake Pads PPF-D1001 For Honda Civic Subaru Impreza Mitsubishi Lancer Ford Mustang Cadillac Chevrolet Tesla Hyundai Genesis Coupe ATS Camaro S Corvette CTS Volvo X Buick S60 Regal
  • Positive Plus Semi-Metallic
  • Product Attributes:
    • WebNameEbay4: For Honda Civic Subaru Impreza Lancer S Semi-metallic Disc Brake Pads Ppf-d1001
    • Friction Material Attachment: Integrally Molded
    • Grade Type: Regular
    • ComponentsSummaryLongWithBrands: 1x Front Positive Plus Disc Brake Pad Set
    • WebNamePlain: Semi-metallic Disc Brake Pads Ppf-d1001
    • ComponentsSummaryShortWithBrands: Positive Plus Disc Brake Pad Set
    • Pad Shims Included: Yes
    • ComponentsSummaryLong: 1x Front Disc Brake Pad Set
    • FMSI Number: 7919
    • Friction Material Thickness Inner Pad: 9.5
    • Chamfered Edges: Yes
    • Friction Material Composition: Semi-metallic
    • WebNameShort: Semi-metallic Disc Brake Pads Ppf-d1001 For Honda Civic Subaru Impreza Mitsubishi Lancer Ford Tesla
    • WebNameEbay: Semi-metallic Disc Brake Pads For Honda Civic Subaru Impreza Mitsubishi Lancer S
    • Slotted: No
    • Friction Material Thickness Outer Pad: 9.5
    • ComponentsSummaryRegularWithBrands: Positive Plus Disc Brake Pad Set
    • ComponentsSummaryShort: Disc Brake Pad Set
    • NumberOfPieces: 1
    • Abutment Clips Included: No
    • WebNameLong: Semi-metallic Disc Brake Pads Ppf-d1001 For Honda Civic Subaru Impreza Mitsubishi Lancer Ford Mustang Cadillac Chevrolet Tesla Hyundai Genesis Coupe Ats Camaro S Corvette Cts Volvo X Buick S60 Regal Xts Wrx Sti V70 Brz Pontiac G8 Sportback Sts Ct6 Toyota
    • ComponentsSummaryRegular: Disc Brake Pad Set
    • WebNameRegular: Semi-metallic Disc Brake Pads Ppf-d1001 For Honda Civic Subaru Impreza Mitsubishi Lancer Ford Mustang Cadillac Chevrolet Tesla Hyundai Genesis Coupe Ats Camaro S Corvette Cts Volvo X Buick S60 Regal
    • Pad Wear Sensor Included: No
    • WebNameEbay2: Semi-metallic Disc Brake Pads Ppf-d1001 For Honda Civic Subaru Impreza Lancer
    • WebNameEbay3: Semi-metallic Disc Brake Pads Ppf-d1001 For Honda Civic Subaru Impreza Lancer S
  • Features:
    • Exclusive PowerGrip™ Semi-Metallic formula provides unmatched braking power (powerful friction, extreme temperature tolerance, aggressive initial bite) while maintaining low dust and noise
    • Fiber-Reinforced Multi-Layer Shim with a rubber core minimize noise, vibration, and harshness for complete quietness
    • Engineered with High Carbon SteelRX™ alloy (Pressure Resistant, Thermal Conductive) and dipped in an Anti-Rust Black Paint to improve durability
    • Scorched for almost no break-in process required, raised initial cold effectiveness, and enhanced Pad-to-Rotor contact
    • Chamfered for mooth and gradual initial engagement on the rotor surface to prevent edge shifting
    • One-Piece Integral Molding Technology improves the durability of the pads and extends the service life
    • Manufactured in ISO-certified facilities and 100% asbestos free
    • Part Reference Numbers : 1001A 1050B D1001A D1050B 7902 7942 7953 8526 8967 8968 9065 9078 7919 SG7953M SS7919M SS7953M SS8526M UP7902M UP7919M UP7953M UP8526M D1001 1001
  • Positive Plus is a leading manufacturer of brake pads developed exclusively for the North American market. Our exclusive PowerGrip™ high-density Semi-Metallic formula provides groundbreaking pad performance and is lab-tested to ensure consistency and reliability in our manufacturing process. The brake pads feature an aggressive initial bite and powerful friction against the rotors while maintaining extreme temperature tolerance. The binding of the metallic particles provides structural integrity, ensuring no performance degradation over the lifetime of the brake pads, unmatched in the market.
  • They are sold as a set and only quantity 1 is required for both wheels

This Part Fits the Following OEM/Substitute Numbers:
1001, 1001A, 1050B, 7902, 7919, 7942, 7953, 8526, 8967, 8968, 9065, 9078, D1001, D1001A, D1050B, SG7953M, SS7919M, SS7953M...VIEW MORE

Additional Fitment Information:
Vehicle Position
2019 - Tesla X Front

Raybestos
  • Brembo
  • Raybestos R-Line
  • Product Attributes:
    • Inner Pad Width: 4.320
    • Outer Pad Height: 2.720
    • Outer Pad Width: 4.320
    • Inner Pad Height: 2.720
    • Inner Pad Overall Thickness: 0.201
    • Friction Material Composition: Metallic
    • Outer Pad Overall Thickness: 0.201
  • They are sold as a set and only quantity 1 is required for both wheels

This Part Fits the Following OEM/Substitute Numbers:
05174327AA, 05174327AC, 102.10530, 104.10530, 104.10531, 105.10530, 105.10531, 106.10530, 106833100B, 16-1053, 17-1053, 171053, 23322997, 25940439, 300.10530, 300.10531, 301.10530, 301.10531...VIEW MORE

Additional Fitment Information:
Vehicle Position
2019 - Tesla X Rear
Showing 1 - 10 of 45 products

Loading...