Use 33560 if 33500 is not available
Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm
Attachment Type: Snap-in
Angle Type: Fixed
Angled Stem: Fixed angle
Plastic Housing Material
Nickel-Coated Core
Programmable for 314.9, 315 and 433MHz Applications
Product Attributes:
Washer Included:No
Mounting Hardware Included:Yes
Grommets Included:No
Manufacturer Warranty:2 Years
California Prop 65 Warning Label (Text):Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
Recommended Torque (in/Lbs):11.5 Inch/lbs.
Valve Stem Included:Yes
Monitor Type:Direct
Real Time Pressure Signal Transmission:Yes
Attachment Type:
Snap-fit
Snap-in
Mounting Location:Wheel
Valve Stem Material:Rubber
Programmed/Programmable:Programmable
Frequency:315 / 314.9 / 433
Activation Type:Not Programmed, Programmable
Core Material:Nickel-coated
Recommended Torque (N-m):1.3 N-m
Valve Cap Included:Yes
Valve Color:Black
Material:Rubber
Power Source:Battery
Features:
Easy to program and covers the majority of vehicles on the road in North America
Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
Engineered and manufactured to OEM design and quality specifcations
Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
Compatible with the majority of independent TPMS programming and diagnostic tools on the market
Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
Sensor comes fully assembled and ready to program and install
Future-proofed OE quality TPMS product supports new and pending OE technologies
Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Increases Steering Link Diameter Front 1/2 in. to 1 in.
Tie Rod Sleeve Upgrade; Increases Steering Link Diameter Front 1/2 in. to 1 in.;
Tie Rod Sleeve Upgrade
Product Attributes:
WARNING CA Proposition 65:No
Features:
Easy Bolt-On Installation
Increases Steering Link Diameter From 1/2 in. To 1 in.
Steel Sleeve Strengthens Steering Components
One area seriously lacking on most GM trucks is the steering link. With an outside diameter of only 1/2in, one wrong turn can easily bend the tie rod leaving your alignment out of whack for all of eternity. That problem is only intensified when you beef up the trucks appearance with an off-road tire and wheel package. Rough Country combats this issue with its new HD Tie Rod Sleeve. Taking the outside diameter from 1/2in to 1in, this steel sleeve strengthens the steering components on the HD with an install time of only an hour. Rough Countrys HD Tie Rod Sleeve simply takes the place of the stock jam nut giving you sturdy assurance that handling issues are not a concern for you anymore.