Shop By Product Matching "B&M"
Image
Product
Price
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Audi S3 |
- WIX Cartridge Lube Metal Free Filter
- Original Equipment Part Number 06L115562B; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Outer Diameter Top: 2.067
- Duty Type: Ld
- Media Material: Synthetic
- Outer Diameter Bottom: 2.067
- Class: A
- Inner Diameter Bottom: 0.941
- Use Wix Premium For Severe Driving- Ideal match for synthetic and high mileage motor oils- Meets of exceeds OE recommended change intervals – up to 15,000 miles- Synthetic blended media provides 99% dirt trapping efficiency- Superior performance in stop and go and heavy traffic- Performs well for routine towing- High capacity – ideal for dirty and dusty environments
This Part Fits the Following OEM/Substitute Numbers:
06K 115 466, 06K 115 562, 06L 115 466, 06L 115 562, 06L115562B, 10-ECO124, 100 322 0022, 100396, 14164, 201078, 2100396, 25.153.00, 26.43.86/10, 4100396, 4598-OX, 5001-522649, 5011-637068, 618-10396...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2023 - Audi S3 | L | 1984 | Mexico | 4 Cyl 2.0L | 121 |
- Rotor Diameter 312mm
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.96
- 49.8
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.597
- 15.15
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.56
- 65
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 0.984
- 25
- Discard Thickness: 0.866
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 112
- 4.409
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
083-2993, 09.9772.11, 120.33098, 121.33098, 121.33131, 12133131, 125.33098, 125.33098CRY, 125.33131, 125.33131CRY, 126.33098CSL, 126.33098CSR, 126.33098SL, 126.33098SR, 126.33131CSL, 126.33131CSR, 126.33131SL, 126.33131SR...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Audi S3 | Front |
- 272X10Mm 5/112
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.92
- 48.75
- Grade Type: Regular
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.605
- 15.35
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.56
- 65
- Inside Diameter:
- 174.65
- 6.875
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Solid
- Nominal Thickness:
- 0.39
- 9.9
- Surface Type: Smooth
- Construction: Full Cast
- Mounting Bolt Hole Quantity: 5
- Misc. Holes: 5
- Bearings Included: No
- Discard Thickness: 0.314
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 112
- 4.409
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
083-2994, 120.33129, 120.33131, 121.33131, 125.33129, 125.33131, 125.33131CRY, 126.33131CSL, 126.33131CSR, 126.33131SL, 126.33131SR, 127.33131CL, 127.33131CR, 127.33131L, 127.33131R, 128.33131CL, 128.33131CR, 128.33131L...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Audi S3 | Rear |
- Rotor Diameter 288mm
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.945
- 49.4
- Grade Type: Regular
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.605
- 15.35
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.56
- 65
- Inside Diameter:
- 161.3
- 6.35
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 0.98
- 24.9
- Surface Type: Smooth
- Construction: Full Cast
- Mounting Bolt Hole Quantity: 5
- Misc. Holes: 5
- Discard Thickness: 0.866
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 112
- 4.409
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
09.9145.11, 120.33110, 121.33110, 125.33110, 125.33110CRY, 126.33110CSL, 126.33110CSR, 126.33110SL, 126.33110SR, 126323, 127.33110CL, 127.33110CR, 127.33110L, 127.33110R, 128.33110CL, 128.33110CR, 128.33110L, 128.33110R...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Audi S3 | Front |
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.976
- 50.2
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.591
- 15
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Inside Diameter:
- 206
- 8.11
- Center Hole Diameter:
- 2.559
- 65
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 1.181
- 30
- Surface Type: Smooth
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 1.063
- 27
- UNSPSC Code: 25171715
- Mounting Bolt Hole Circle Diameter:
- 112
- 4.409
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
120.33144, 121.33144, 125.33144, 125.33144CRY, 126.33144CSL, 126.33144CSR, 126.33144SL, 126.33144SR, 127.33144L, 127.33144R, 128.33144CL, 128.33144CR, 128.33144L, 128.33144R, 1K0615301AD, 320.33144, 320.33144C, 3C0615301D...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Audi S3 | Front |
- FRAM, TG11784, Oil Filter
- Cartridge Oil Filter
- Tough Guard
- Product Attributes:
- O-Ring Inside Diameter: 2.362
- O-Ring Thickness: 0.118
- Outer Diameter Top: 2.087
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Washable: No
- Non Slip Grip: No
- Torque Nut: No
- Housing Color: Na
- O-Ring Outside Diameter: 2.48
- Top Inside Diameter: 0.984
- Grade: Premium
- Outer Diameter Bottom: 2.087
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Inside Diameter Bottom: 0.984
- Bypass Relief Valve: No
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: No
-
Features:
- Proven protection for up to 15,000 miles (24,000 kilometers)
- Engineered for tough driving conditions, stop and go traffic, and hot and cold temperatures
- Synthetic blend media provides 99% dirt holding capacity
- Designed for use with synthetic or conventional motor oils
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines
- FRAM Tough Guard® oil filters are designed for tough driving conditions, stop and go traffic, and hot and cold temperatures. The synthetic blend media provides 99% dirt holding capacity and engineered to perform with conventional and synthetic motor oil.
This Part Fits the Following OEM/Substitute Numbers:
06K 115 466, 06K 115 562, 06L 115 466, 06L 115 562, 06L 115 562B, 100024, 2100024, 8-10024, 91017, 94024, CF8161, CH11784, DL11784, E358HD246, FA6107ECO, FD11784, FE11784, FF11784...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Audi S3 |
- FRAM, XG11784, Oil Filter
- Cartridge Oil Filter
- Ultra Synthetic
- Product Attributes:
- O-Ring Inside Diameter: 2.362
- O-Ring Thickness: 0.118
- Outer Diameter Top: 2.087
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Non Slip Grip: No
- Torque Nut: No
- Housing Color: Na
- O-Ring Outside Diameter: 2.480
- Top Inside Diameter: 0.984
- Grade: Ultimate
- Outer Diameter Bottom: 2.087
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Inside Diameter Bottom: 0.984
- Bypass Relief Valve: No
- Filter Media Material: Synthetic
- Anti-Drain Back Valve: No
-
Features:
- Proven protection for up to 20,000 miles (32,000 kilometers)
- Synthetic blend media provides 99%+ filtration efficiency*
- Optimized for synthetic motor oil
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines
- FRAM Ultra Synthetic® oil filters are engineered for drivers who are looking for ultimate performance and engine protection. Its dual-layered synthetic blend media provides 99%+ filtering efficiency and protects up to 20,000 miles (32,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
06K 115 466, 06K 115 562, 06L 115 466, 06L 115 562, 06L 115 562B, 100024, 2100024, 8-10024, 91017, 94024, CF8161, DL11784, E358HD246, FA6107ECO, FD11784, FE11784, FF11784, FS11784...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Audi S3 |
Showing 1 - 8 of 8 products
Loading...