Shop By Product Matching "B&M"
Choose your Submodel for your 2023 Subaru Ascent
Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Subaru Ascent | H | 2387 | 4 Cyl 2.4L | Onyx Edition | 146 |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru Ascent |
- Locking
This Part Fits the Following OEM/Substitute Numbers:
10501, 10501D, 10504, 10504Y, 10507, 10591, 10591D, 1078-290207, 11504, 11504Y, 11507, 11591, 12F20L, 1H0201553, 307201551, 31778, 31780, 31783...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Subaru Ascent | H | 2387 | 4 Cyl 2.4L | 146 |
- 9005/90006/9012/H10;Fix Canbus and PWM Error
- W/ HALOGEN CAPSULE HEADLAMPS
- All in one harness to fix CANBus and PWM errors for any LED headlight and fog light conversion
- Product Attributes:
- IP Rating: Ip67
- Power: 6.5w
- Operating Voltage: 9-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
- Current: 0.5a At 13v
-
Features:
- Error cancelling wiring harness for vehicles equipped with CANBus and PWM system.
- Eliminates flickering, on and off flash, and dashboard warning lights and other vehicle electrical system complications.
- For use with LED headlight bulbs. Developed for upgrading LED headlight bulbs into the headlight and fog light of vehicles that operate with CANBUS / PWM technology. Simply plug and play installation to prevent bulb out warnings or flickering.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Subaru Ascent | High Beam |
- HELLA Turn Signal Light Bulb 7443
- Halogen - W21/5W - 12V - 21/5W - Socket Type Bulb: W3x16d
- Product Attributes:
- Bulb Color:
- Clear
- Crystal Clear
- Assy/Disassy by Qualified Personnel Required!: .
- Average Rated Life: 500.0
- Voltage:
- 12.0
- 12.00
- Wattage:
- 21.0
- 21.00
- Lamp Type: W21/5w
- Bulb Technology: Halogen
- Amperage Rating: 1.9
- Light Design: Halogen
- Filament Quantity: 2
- Bulb Socket Type: W3 X 16d
- Brightness: 35.0
- Street Legal: Yes
- Rated Power [W]: 21/5
- Bulb Color:
-
Features:
- Compact design fits most vehicle models with ease.
- Dual power option offers flexible lighting options.
- Standard wedge base ensures compatibility with many sockets.
- Durable multi-color design improves aesthetics and safety.
- Safety travels with you - bulbs from HELLA. When you are on the road with your vehicle, everything revolves around optimal visibility. One of the decisive factors is the absolutely reliable functionality of the lamps. HELLA has the right technology for every case here - which is why HELLA brings a strong range of bulbs to the road. All our bulbs, from standard to Xenon, reliably deliver maximum performance at all times. Those who focus on safety will always find exceptional and tested quality for every vehicle at HELLA. For your safety in road traffic.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- This item must be purchased in quantities of 10
This Part Fits the Following OEM/Substitute Numbers:
7443
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Subaru Ascent | Front |
- Class 3 Trailer Hitch; 2in. Receiver; Select Subaru Ascent
- 5000 lbs. Weight Carrying Cap.; 750 lbs. WC Tongue Weight; Square Main Body; Gloss Black Powder Coat
- CURT 13448 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Subaru Ascent
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
-
Features:
- Rated To 3500lbs Gross Trailer Weight And 350lbs Tongue Weight
- Engineered w/a Vehicle Specific Design For A Custom Fit
- Concealed Main Body For OE Look And Seamless Integration
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable Powder Coat Finish
- Co Cured In A Rust Resistant Liquid Bonderite Coating
- Equipped w/An Open Back Receiver For Easy Cleaning
- Limited Lifetime Warranty
- Made In USA
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Subaru Ascent (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 750 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 750 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Subaru Ascent | Rear |
- Bosch ICON Wiper Blade
- Mexico Made
- ICON
- Product Attributes:
- Adapters Required: Yes
- Prop 65 Warning Label Required?: No
- Winter Blade: No
- Automotive Item Weight (lbs): 0.925942 Lb
- Private Brand?: No
- Heated (Wiper Blade): No
- Wiping Edges: 1
- Pressure Point Quantity: Infinite
- Adapters Included: No
- Quick Connect Hardware Included: Yes
- Frame Color: Black
- Wiper Blade Connection Type: Male
- Wiper Blade Material: Epdm
- Wiper Blade Design: All-season
- Attached Spoiler / Aerofoil: Yes
- Blade Type: Beam
- Refillable: No
-
Features:
- ClearMax 365™ rubber technologyThis technology combines a soft rubbercore with a powder-coated shell which
- Protects the wiping edge from ozonedeterioration, snow, sleet, rain, androad debris for longer life*
- Reduces wiping friction forquieter performance
- Resists contaminants such as fluids,salts, insects and other road debrisfor streak free visibility
- Superior performance at all speedsAsymmetrical spoiler maintains consistentblade contact with the windshield
- DynamicFit™ technologyOptimized beam bending technologyadapts to the entire curve of thewindshield
- Easy installationOriginal equipment quality adapter
- Extreme All Weather Performance. Tested to Perform Up to 40% Longer*
- Bosch ICON Wiper Blade
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Subaru Ascent | Front Right |
- FRAM, PH7317, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.218
- Non Slip Grip: Yes
- Gasket Thickness: 0.281
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 350.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15
- Grade: Advanced
- Gasket Outside Diameter: 2.484
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- Silicone anti-drain back valve helps ensure safe engine start up
- SureGrip® technology for easy install and removal
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
041-8075, 041-8135, 0A45310244, 1230A152, 12582255, 1356, 150-1009, 150-1010, 15208-31U00, 15208-31U01, 15208-31U0A, 15208-31U0B, 15208-65F0C, 15208-9E000, 15208-9E01A, 15208-AA15A, 15208-AA160, 15298-31U1B...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Subaru Ascent | H | 2387 | 4 Cyl 2.4L | 146 |
- FRAM, XG7317, Oil Filter
- Spin-on Oil Filter
- Ultra Synthetic
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.218
- Non Slip Grip: Yes
- Gasket Thickness: 0.281
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 350.000
- Gasket Type: Base
- Housing Color: Gold
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15
- Grade: Ultimate
- Gasket Outside Diameter: 2.484
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Synthetic
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 20,000 miles (32,000 kilometers)
- SureGrip® technology for easy install and removal
- Silicone anti-drain back valve helps ensure safe engine start up
- Dual-layered synthetic blend media provides 99%+ filtration efficiency*
- Optimized for synthetic motor oil
- FRAM Ultra Synthetic® oil filters are engineered for drivers who are looking for ultimate performance and engine protection. Its dual-layered synthetic blend media provides 99%+ filtering efficiency and protects up to 20,000 miles (32,000 kilometers). The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter. FRAM Ultra Synthetic is equipped with SureGrip® technology that provides a non-slip surface allowing for easy install and removal.
This Part Fits the Following OEM/Substitute Numbers:
041-8075, 041-8135, 0A45310244, 1230A152, 12582255, 1356, 150-1009, 150-1010, 15208-31U00, 15208-31U01, 15208-31U0A, 15208-31U0B, 15208-65F0C, 15208-9E000, 15208-9E01A, 15208-AA15A, 15208-AA160, 15208-PLM-A02...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru Ascent |
Showing 1 - 10 of 10 products
Loading...