Shop By Product Matching "Bando"
Choose your Engine for your 1990 Jeep Wrangler
Image
Product
Price
- Fits 6 Rib Belt
- Drive Belt Idler Pulley; Fits 6 Rib Belt;
- Drive Belt Idler Pulley
-
Features:
- Drive Belt Idler Pulley
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1990 - Jeep Wrangler | L | - | 4 Cyl 2.5L | 150 |
- 100mm; 6 Groove
- Drive Belt Idler Pulley; 100mm; 6 Groove;
- Drive Belt Idler Pulley
-
Features:
- Drive Belt Idler Pulley
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1990 - Jeep Wrangler | L | - | 6 Cyl 4.2L | 258 |
- DriveAlign Premium OE Pulley
- Product Attributes:
- Contact Surface: Smooth/backside
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Pulley 1 Outside Diameter (mm): 90
- Pulley 1 Flanged: No
- Bearing Bore Inside Diameter: 17
- Pulley 1 Width (mm): 30
- Material: Steel
-
Features:
- Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
- Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
- OE-quality fit for virtually every domestic or import vehicle on the road today
- Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
- Premium bearings eliminate bearing noise
- Mounting hardware included for some popular applications
- Reliable operation under severe conditions
- DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
231097, 35042, 38042, 45018, 4536074, 4536173, 4792112, 4792112AD, 4792112AE, 49038, 5281007, 53002905, 83505475, 89097, 900055, 900055A, 9031C10, SMAMP42097...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1990 - Jeep Wrangler | L | - | GAS | 6 Cyl 4.2L | 258 |
- W/American A.C. Kit
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1227
- 48.32
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 1207
- 47.5
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0059977792, 0951213, 10024881, 10478, 10A1205, 10AV1213, 10AX1210, 10AX1214, 10X1225, 11436933, 11502103, 11502233, 11502351321, 1191214, 11A1205, 11AV1213, 11G1205, 1243...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1990 - Jeep Wrangler | L | - | Fan and Air Conditioning | GAS | 4 Cyl 2.5L | 150 |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1113
- 43.83
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 1092
- 43
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0119000, 0180200, 025903137, 027075152, 027106055Y, 0324410, 0334376, 0401438, 061546, 10430077350, 1080, 10A1090, 10A30895, 10AV1087, 10V1090, 10X1110, 10X1113, 1104303...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1990 - Jeep Wrangler | L | - | Fan and Alternator | GAS | 4 Cyl 2.5L | 150 |
- W/V-Belt Drive
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1113
- 43.83
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 1092
- 43
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1990 - Jeep Wrangler | L | - | Fan and Alternator | GAS | 6 Cyl 4.2L | 258 |
- Poly Rib Belt Sepentine Belt
- (Serpentine Belt)
w/o Power Steering
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1990 - Jeep Wrangler | L | - | Primary | 6 Cyl 4.2L | 258 |
- Top Cog V-Belt
- (V-Belt)
w/o Air Conditioning
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1990 - Jeep Wrangler | L | - | Alternator | 6 Cyl 4.2L | 258 |
- w/o A.C.
- Product Attributes:
- Top Width: .44
- Outside Circumference:
- 1106.68
- 43.57
- Color: Black
- Banded Belt: N
- Standards: Sae J636, Sae J637
- Effective Length:
- 1092.20
- 43
- Belt Construction: Bottom Cog
- Minimum Operating Temperature:
- -35
- -37.2
- Material: Synthetic Rubber Compound
- Maximum Operating Temperature:
- 175
- 79.4
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1990 - Jeep Wrangler | L | - | Fan and Alternator | 4 Cyl 2.5L | 150 |
- Product Attributes:
- Top Width: .44
- Outside Circumference:
- 1106.68
- 43.57
- Color: Black
- Banded Belt: N
- Standards: Sae J636, Sae J637
- Effective Length:
- 1092.20
- 43
- Belt Construction: Bottom Cog
- Minimum Operating Temperature:
- -35
- -37.2
- Material: Synthetic Rubber Compound
- Maximum Operating Temperature:
- 175
- 79.4
This Part Fits the Following OEM/Substitute Numbers:
02-7075152, 10A1090, 11A1090, 13-431, 13431, 14017798, 14058791, 141-0455, 141-0992, 1485398, 15-430, 15430, 15435, 15436, 15W430L, 1930G1-12, 208156, 215356...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1990 - Jeep Wrangler | L | - | Fan and Alternator | 6 Cyl 4.2L | 258 |
Showing 1 - 10 of 31 products
Loading...