Image
Product
Price
- Direct Fit Chrome 4 Piece
- Direct Fit Chrome Plated 4 Piece Two 39 Inch Length X 1/4 Inch Thick X 1-1/4 To 3/4 Inch Tapered Height Pieces And Two 22 Inch Length X 1/4 Inch Thick X 1-1/4 Inch Height Pieces
- Side Molding
- Product Attributes:
- Installation Type: 3m Tape
- Drilling Required: No
-
Features:
- Designed To Fit Multiple Vehicles
- Chrome Plated For A Long Lasting Shine
- Constructed Of Durable Automotive-Grade ABS
- Quality Fitment
- Easy Installation
- Limited Lifetime Warranty
- CCI proudly presents a new body side molding that fit multiple vehicles. This new body side molding, is made of quality ABS plastic with chrome finish that upgrades both vehicle and trim level appearance.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Jeep Cherokee |
- 19mm X 25mm Oval Body Plug; Rubber
- Body Floor Pan Plug; 19mm X 25mm Oval Body Plug; Rubber;
- Body Floor Pan Plug
-
Features:
- Body Floor Pan Plug
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Jeep Cherokee |
- M10 x 1.0 Threads; M6x1.0 Hex Flange Lock
- Nut; M10 x 1.0 Threads; M6x1.0 Hex Flange Lock Nut;
- Nut
-
Features:
- Nut
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Jeep Cherokee |
- Electronic Throttle Body
- Product Attributes:
- Electrical Connection Type: Male
- Terminal Count: 6
- Throttle Body Finish: Natural
- Mounting Hardware Included:
- No
- Non
- Inlet Diameter: 2.57
- Grade Type:
- Performance
- Rendimiento
- Outlet Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Throttle Body Material:
- Aluminio
- Aluminum
- Venturi Quantity: 0
- Adjustable:
- No
- Non
- Connector/Terminal Type: Blade
- Fuel System Type: Gas
- Bore Diameter: 2.57
- Outlet Diameter: 2.5
- Throttle Position Sensor Included:
- Oui
- Sí
- Yes
- Idle Air Control Motor Included:
- No
- Non
- Installation Hardware Included:
- No
- Non
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Fuel Injectors Included:
- No
- Non
- Housing Color: Natural
- Inlet Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Throttle Body Mounted:
- No
- Non
- Tipo de conexión eléctrica: Macho
- Throttle Body Type:
- Electronic
- Electrónico
- Contenidos del paquete:
- 1 Cuerpo Del Acelerador Electrónico
- 1 Junta
- Tipo de terminal/conector: Aspa
- Throttle Body Spacer Included:
- No
- Non
-
Features:
- Direct replacement - this 100% new electronic throttle body is designed to match the performance of the original throttle body on specified Chrysler, Dodge and Jeep vehicles
- Scan tool required - calibration of the OE or any aftermarket version of this part may require an authorized scan tool to interact with the secure gateway on certain 2018 and 2019+ Chrysler vehicles
- Improved performance - engineered with a corrosion-resistant aluminum body, non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to help prevent future failures
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- When certain Chrysler, Dodge and Jeep vehicles idle roughly, display a malfunction indicator lamp or set DTCs, the cause might be oil ingress or dirt and carbon buildup in the electronic throttle body. This 100% new Dorman OE FIX body is designed to match the performance of the original part but is upgraded to eliminate those common causes of failure. It features a non-contact Hall effect sensor for increased durability and a proprietary Sensor Shield butterfly shaft seal installed into the throttle body casting. This exclusive additional seal isn't on the original equipment design, and seals the critical area that houses the gear train and electronics, better protecting them from debris and oil intrusion. Note that the installation and calibration of the original equipment or any aftermarket version of this throttle body may require an authorized scan tool that can interact with the secure gateway found on some 2018 and many 2019 and newer Chrysler vehicles. On those vehicles, accessing that gateway requires an authorized encryption code.
This Part Fits the Following OEM/Substitute Numbers:
4891970AB, 4891970AC, 4891970AD, 67-7014, 6E7014, NTB1079, S20214, TB1247
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Jeep Cherokee | L | 2360 | 4 Cyl 2.4L | 144 |
- Electronic Throttle Body
- Product Attributes:
- Electrical Connection Type: Male
- Terminal Count: 6
- Throttle Body Finish: Natural
- Mounting Hardware Included:
- No
- Non
- Inlet Diameter: 2.97
- Outlet Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Throttle Body Material:
- Aluminio
- Aluminum
- Venturi Quantity: 0
- Adjustable:
- No
- Non
- Connector/Terminal Type: Pin
- Fuel System Type: Gas
- Bore Diameter: 2.97
- Outlet Diameter: 2.95
- Throttle Position Sensor Included:
- Oui
- Sí
- Yes
- Idle Air Control Motor Included:
- No
- Non
- Installation Hardware Included:
- No
- Non
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Fuel Injectors Included:
- No
- Non
- Housing Color: Natural
- Inlet Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Throttle Body Mounted:
- No
- Non
- Tipo de conexión eléctrica: Macho
- Throttle Body Type:
- Electronic
- Electrónico
- Contenidos del paquete:
- 1 Cuerpo Del Acelerador
- 1 Junta
- Tipo de terminal/conector: Clavija
- Throttle Body Spacer Included:
- No
- Non
-
Features:
- Upgraded design - this plug-and-play replacement throttle body features a contactless Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures
- New construction - 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge
- Rigorously tested - complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
- Trustworthy quality - vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience
- Original equipment throttle bodies often fail from moisture and oil intrusion and failed internal electronics. This Dorman OE FIX throttle body features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures.
This Part Fits the Following OEM/Substitute Numbers:
5184349AB, 5184349AC, 5184349AD, 5184349AE, 5184349AF, 67-7012, 6E7012, NTB1066, RTB1066, S20203, TB1163
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Jeep Cherokee | V | 3239 | 6 Cyl 3.2L | 198 |
- Class 3 Trailer Hitch; 2in. Receiver; Select Jeep Cherokee KL (Exposed Main Body
- 5000lbs. Gross Trailer Weight; 750lbs. Tongue Weight; 6000lbs. Weight Distributing; 750lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 13171 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Jeep Cherokee KL
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 5000
- Body Shape: Square
- WD Tongue Weight: 750
- Install Time: 30 Minutes
- WC Tongue Weight: 750
- Weight Distribution: 6000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Cherokee KL (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 750 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 750 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2014 - Jeep Cherokee | V | 3239 | Rear | 6 Cyl 3.2L | Trailhawk | 198 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Jeep Cherokee | V | 3239 | 6 Cyl 3.2L | 198 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Jeep Cherokee | L | 2360 | 4 Cyl 2.4L | 144 |
- Not Legal For Sale Or Use On Vehicles Registered In California
- Throttle Body;
- Throttle Body
-
Features:
- Throttle Body
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2014 - Jeep Cherokee | V | 3239 | 6 Cyl 3.2L | Trailhawk | 198 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Jeep Cherokee | L | 2360 | 4 Cyl 2.4L | 144 |
Showing 1 - 10 of 11 products
Loading...