Shop By Product Matching "Body"
Choose your Submodel for your 2018 Toyota Sienna
Image
Product
Price
- Class 3 Trailer Hitch; 2in. Receiver; Select Toyota Sienna (Exposed Main Body)
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 5000lbs. Weight Distributing; 500lbs. Weight Distributing Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 25 Minutes~Under Car Trimming Required
- CURT 13105 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Toyota Sienna
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- WD Tongue Weight: 500
- Install Time: 25 Minutes
- WC Tongue Weight: 350
- Weight Distribution: 5000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Sienna (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2018 - Toyota Sienna | V | 3456 | Rear | 6 Cyl 3.5L | XLE | - |
- Electronic Throttle Body
- Product Attributes:
- Electrical Connection Type: Female Socket
- Terminal Count: 6
- Throttle Position Sensor Included:
- Oui
- Sí
- Yes
- Idle Air Control Motor Included:
- No
- Non
- Installation Hardware Included:
- No
- Non
- Gasket Or Seal Included:
- No
- Non
- Fuel Injectors Included:
- No
- Non
- Housing Color:
- Plateado
- Silver
- Venturi Quantity: 0
- Adjustable:
- No
- Non
- Throttle Body Mounted:
- No
- Non
- Tipo de conexión eléctrica: Enchufe Hembra
- Connector/Terminal Type: Blade
- Throttle Body Type:
- Electronic
- Electrónico
- Contenidos del paquete: 1 Cuerpo Del Acelerador
- Tipo de terminal/conector: Aspa
- Fuel System Type: Gas
- Throttle Body Spacer Included:
- No
- Non
-
Features:
- Direct replacement - this replacement electronic throttle body is designed to match the performance of the original equipment throttle body on specified vehicles
- Ideal solution - engineered to help restore proper engine performance when the factory throttle body is malfunctioning due to oil ingress or dirt and carbon buildup, resulting in DTCs and erratic idle
- Durable construction - features high-quality materials engineered and manufactured to exacting standards to help prevent future failures
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- When a vehicle idles erratically, displays a malfunction indicator lamp or sets DTCs, the cause might be oil ingress or dirt and carbon buildup in the electronic throttle body. This replacement electronic throttle body is designed to match the performance of the original equipment unit on specified vehicles and is built from high-quality materials with exacting standards to help prevent future failures.
This Part Fits the Following OEM/Substitute Numbers:
1540189, 220300P060, 2203031090, 67-8029, 6E-8029, S20410, TB1235, TBT002
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Toyota Sienna | V | 3456 | 6 Cyl 3.5L | - |
- Class 3 Trailer Hitch; 2in. Receiver; Select Toyota Sienna (Concealed Main Body)
- 3500lbs. Gross Trailer Weight; 525lbs. Tongue Weight Square Main Body~Underbody Panel Trimming May Be Required~No Drilling Required~Visibility: Concealed~Install Time 60 Minutes~Temporarily Lower Exhaust For Installation~Temporarily Remove Underbody Panel For Installation
- CURT 13343 Class 3 Trailer Hitch; 2-In Receiver; Concealed Main Body; Fits Select Toyota Sienna
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 3500
- Body Shape: Square
- Install Time: 60 Minutes
- WC Tongue Weight: 525
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/Cast
- Welded
- Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Sienna (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 525 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2018 - Toyota Sienna | V | 3456 | Rear | 6 Cyl 3.5L | XLE Premium | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Toyota Sienna |
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Toyota Sienna |
- Direct Fit Chrome 4 Piece
- Direct Fit Chrome Plated 4 Piece Two 39 Inch Length X 1/4 Inch Thick X 1-1/4 To 3/4 Inch Tapered Height Pieces And Two 37-1/2 Inch Length X 1/4 Inch Thick X 1-1/4 To 3/4 Inch Tapered Height Pieces
- Side Molding
- Product Attributes:
- Installation Type: 3m Tape
- Drilling Required: No
-
Features:
- Designed To Fit Multiple Vehicles
- Chrome Plated For A Long Lasting Shine
- Constructed Of Durable Automotive-Grade ABS
- Quality Fitment
- Easy Installation
- Limited Lifetime Warranty
- CCI proudly presents a new body side molding that fit multiple vehicles. This new body side molding, is made of quality ABS plastic with chrome finish that upgrades both vehicle and trim level appearance.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Toyota Sienna |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- OE Replacement
- Incl.Electronic Throttle Body Actuator
- w/Gasket
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Toyota Sienna |
Showing 1 - 7 of 7 products
Loading...