Image
Product
Price
- Class 3 Hitch; 2in. Receiver; Select Silverado; Sierra 1500 (Concealed Main Body
- 6000lbs. Gross Trailer Weight; 600lbs. Tongue Weight; 10000lbs. Weight Distributing; 1000lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 30 Minutes
- CURT 13301 Class 3 Trailer Hitch; 2-In Receiver; Concealed Main Body; Fits Select Chevrolet Silverado; GMC Sierra 1500
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 6000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 6000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 1000
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 600
- Weight Distribution: 10000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy Silverado 1500, LD, Limited and GMC Sierra 1500, LD, Limited (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2019 - GMC Sierra 1500 Limited | V | 5328 | Rear | 8 Cyl 5.3L | 325 |
- Inline Speedo Cal 2017-19 Legacy GM Trucks+Full Size SUVs (Ex 19 New Body Truck)
- Updates Via Internet To a Full Function Max Energy Power Programmer;Not For Sale Or Use In California SpeedometerOdometer Correction
- Hypertech?s In-line Speedometer Calibrator Module is an in-line module to correct the speedometer and odometer for non-stock tire sizes and/or rear gear ratios.
- In-Line Speedometer Calibrator Module
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm. Visit Www.p65warnings.ca.gov
-
Features:
- No Limitations For Increasing Tire Height
- Installs Easily To The Factory Wiring Harness
- This module is perfect for vehicles with computers that don?t allow for tire size and/or rear gear ratio correction or re-calibrate for tire sizes and/or rear gear ratios outside the range of programmers.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2019 - GMC Sierra 1500 Limited | V | 5328 | FLEX | 8 Cyl 5.3L | 325 |
- 2 in. Drop; 4 in. Rear Drop; Includes Coils/Adjustable Rear Flip Kit/Maxtrac Shocks;w/2 in. Drop And Rear w/4 in. Drop For Models w/1 Pc. Drive Shaft
- Lowering Kit; 2 in. Front Drop; 4 in. Rear Drop; Includes Front Coils/Adjustable Rear Flip Kit/Maxtrac Shocks;
- Lowering Kit
-
Features:
- Built In Pinion Correction
- Complete With U Bolt Hardware
- Universal Application
- Our 2/4 drop is a great way to lower and level out your vehicle without breaking the budget. This budget friendly kit comes with a 2-inch lowering coil springs for the front. The rear comes with a 5 inch flip kit to drop the axle and a 1 inch lift shackle to bring the vehicle back to a 4 inch drop. We then include rear twin tube shocks for better ride control. What makes this kit great is you can always add or remove components to get the look you're after.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2019 - GMC Sierra 1500 Limited | V | 5328 | Front and Rear | 8 Cyl 5.3L | 325 |
- 2 in. Drop; 4 in. Rear Drop; Includes Coils/Adjustable Rear Flip Kit/Maxtrac Shocks;w/2 in. Drop And Rear w/4 in. Drop For Models w/1 Pc. Drive Shaft
- Lowering Kit; 2 in. Front Drop; 4 in. Rear Drop; Includes Front Coils/Adjustable Rear Flip Kit/Maxtrac Shocks;
- Lowering Kit
-
Features:
- Built In Pinion Correction
- Complete With U Bolt Hardware
- Universal Application
- Our 2/4 drop is a great way to lower and level out your vehicle without breaking the budget. This budget friendly kit comes with a 2-inch lowering coil springs for the front. The rear comes with a 5 inch flip kit to drop the axle and a 1 inch lift shackle to bring the vehicle back to a 4 inch drop. We then include rear twin tube shocks for better ride control. What makes this kit great is you can always add or remove components to get the look you're after.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2019 - GMC Sierra 1500 Limited | V | 5328 | Front and Rear | 8 Cyl 5.3L | 325 |
- 3/5 in. Front Drop; 4/6 in. Rear Drop; Includes Lowering Spindles Adjustable Lowering Struts; Rear Adjustable Flip Kit; MaxTrac Shocks;Front w/3 in. Drop And Rear w/4 in. Drop For Models w/1 Pc. Drive Shaft~w/Stamped Steel Or Aluminum Suspension
- Lowering Kit; 3/5 in. Front Drop; 4/6 in. Rear Drop; Includes Lowering Spindles; Front Adjustable Lowering Struts; Rear Adjustable Flip Kit; MaxTrac Shocks;
- Lowering Kit
-
Features:
- Lowering Kit
- This lowering kit is fully adjustable from 3-4" of drop in the front and 5-6" of drop in the back. Kit comes complete with our 2" forged aluminum spindles in the front and our new 0-3" adjustable lowering struts that utilize the factory coil springs for a factory ride. rear is achieved via axle relocator along with new spring plates and adjustable hanger. MaxTrac twin tube gas charged rear shocks are also included along with all necessary hardware to complete this kit.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2019 - GMC Sierra 1500 Limited | V | 5328 | Front and Rear | 8 Cyl 5.3L | 325 |
- 3/5 in. Front Drop; 4/6 in. Rear Drop; Includes Lowering Spindles Adjustable Lowering Struts; Rear Adjustable Flip Kit; MaxTrac Shocks;Front w/4 in. Drop And Rear w/6 in. Drop For Models w/1 Pc. Drive Shaft~w/Stamped Steel Or Aluminum Suspension
- Lowering Kit; 3/5 in. Front Drop; 4/6 in. Rear Drop; Includes Lowering Spindles; Front Adjustable Lowering Struts; Rear Adjustable Flip Kit; MaxTrac Shocks;
- Lowering Kit
-
Features:
- Lowering Kit
- This lowering kit is fully adjustable from 3-4" of drop in the front and 5-6" of drop in the back. Kit comes complete with our 2" forged aluminum spindles in the front and our new 0-3" adjustable lowering struts that utilize the factory coil springs for a factory ride. rear is achieved via axle relocator along with new spring plates and adjustable hanger. MaxTrac twin tube gas charged rear shocks are also included along with all necessary hardware to complete this kit.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2019 - GMC Sierra 1500 Limited | V | 5328 | Front and Rear | 8 Cyl 5.3L | 325 |
- 2 in. Drop; 4 in. Rear Drop; Includes Forged Aluminum Spindles/Adjustable Rear Flip Kit w/Shackles/Rear Maxtrac Shocks;w/2 in. Drop And Rear w/4 in. Drop For Models w/1 Pc. Drive Shaft
- Lowering Kit; 2 in. Front Drop; 4 in. Rear Drop; Includes Front Forged Aluminum Spindles/Adjustable Rear Flip Kit w/Shackles/Rear Maxtrac Shocks;
- Lowering Kit
-
Features:
- Built In Pinion Correction
- Complete With U Bolt Hardware
- Universal Application
- Our 2/4 drop kit is a great way to lower your vehicle without sacrificing ride quality. This kit comes with our patent pending forged aluminum spindle which keeps the ride close to factory and allows for larger heavier wheels. The rear comes with a 5 inch flip kit to drop the axle and a 1 inch lifted shackle to bring the vehicle back to a 4 inch drop. We then include rear twin tube shocks for better ride control. What makes this kit great is you can always add or remove components to get the look you're after.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Bed Length | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2019 - GMC Sierra 1500 Limited | V | 5328 | Front and Rear | 8 Cyl 5.3L | 78.8 | RWD | 325 |
- 2 in. Drop; 4 in. Rear Drop; Includes Forged Aluminum Spindles/Adjustable Rear Flip Kit w/Shackles/Rear Maxtrac Shocks;w/2 in. Drop And Rear w/4 in. Drop For Models w/1 Pc. Drive Shaft
- Lowering Kit; 2 in. Front Drop; 4 in. Rear Drop; Includes Front Forged Aluminum Spindles/Adjustable Rear Flip Kit w/Shackles/Rear Maxtrac Shocks;
- Lowering Kit
-
Features:
- Built In Pinion Correction
- Complete With U Bolt Hardware
- Universal Application
- Our 2/4 drop kit is a great way to lower your vehicle without sacrificing ride quality. This kit comes with our patent pending forged aluminum spindle which keeps the ride close to factory and allows for larger heavier wheels. The rear comes with a 5 inch flip kit to drop the axle and a 1 inch lifted shackle to bring the vehicle back to a 4 inch drop. We then include rear twin tube shocks for better ride control. What makes this kit great is you can always add or remove components to get the look you're after.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Bed Length | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2019 - GMC Sierra 1500 Limited | V | 5328 | Front and Rear | 8 Cyl 5.3L | 78.8 | RWD | 325 |
- 3/5 in. Front Drop; 4/6 in. Rear Drop; Includes Lowering Spindles Adjustable Lowering Struts; Rear Adjustable Flip Kit; MaxTrac Shocks;Front w/3 in. Drop And Rear w/4 in. Drop For Models w/1 Pc. Drive Shaft~w/Stamped Steel Or Aluminum Suspension
- Lowering Kit; 3/5 in. Front Drop; 4/6 in. Rear Drop; Includes Lowering Spindles; Front Adjustable Lowering Struts; Rear Adjustable Flip Kit; MaxTrac Shocks;
- Lowering Kit
-
Features:
- Lowering Kit
- This lowering kit is fully adjustable from 3-4" of drop in the front and 5-6" of drop in the back. Kit comes complete with our 2" forged aluminum spindles in the front and our new 0-3" adjustable lowering struts that utilize the factory coil springs for a factory ride. rear is achieved via axle relocator along with new spring plates and adjustable hanger. MaxTrac twin tube gas charged rear shocks are also included along with all necessary hardware to complete this kit.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2019 - GMC Sierra 1500 Limited | V | 5328 | Front and Rear | 8 Cyl 5.3L | 325 |
- 3/5 in. Front Drop; 4/6 in. Rear Drop; Includes Lowering Spindles Adjustable Lowering Struts; Rear Adjustable Flip Kit; MaxTrac Shocks;Front w/4 in. Drop And Rear w/6 in. Drop For Models w/1 Pc. Drive Shaft~w/Stamped Steel Or Aluminum Suspension
- Lowering Kit; 3/5 in. Front Drop; 4/6 in. Rear Drop; Includes Lowering Spindles; Front Adjustable Lowering Struts; Rear Adjustable Flip Kit; MaxTrac Shocks;
- Lowering Kit
-
Features:
- Lowering Kit
- This lowering kit is fully adjustable from 3-4" of drop in the front and 5-6" of drop in the back. Kit comes complete with our 2" forged aluminum spindles in the front and our new 0-3" adjustable lowering struts that utilize the factory coil springs for a factory ride. rear is achieved via axle relocator along with new spring plates and adjustable hanger. MaxTrac twin tube gas charged rear shocks are also included along with all necessary hardware to complete this kit.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2019 - GMC Sierra 1500 Limited | V | 5328 | Front and Rear | 8 Cyl 5.3L | 325 |
Showing 1 - 10 of 19 products
Loading...