Shop By Product Matching "Brake"
Choose your Engine for your 1962 Chevrolet P10 Series
Image
Product
Price
- 3RD Brake Light Logic Module
- 3RD Brake Light Logic Module
- 3rd Brake Light Logic Module
- Product Attributes:
- Wires: 3
-
Features:
- Compact Easy To Install
- Required when using a single L.E.D. as a third brake light, Pacers Logic Module filters out unwanted turn signal inputs common on domestic vehicles that typically use single filament bulbs.
Additional Fitment Information:
| Vehicle |
|---|
| 1962 - Chevrolet P10 Series |
- Brake Hydraulic Hose
- w/3.73 Axle Ratio w/4.11 Axle Ratio
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- No
- Non
- Diámetro interior de la acoplación de extremo 2: 7/16"-24
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- No
- Non
- End 1 Fitting Type:
- Macho
- Male
- End 2 Fitting Inside Diameter:
- 7/16 In-24
- 7/16"-24
- Color:
- Black
- Negro
- Noir
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Outer Sleeve Material:
- Caucho
- Élastomère
- Rubber
- Contenidos del paquete: 1 Manguera Del Freno
- DOT Approved:
- Oui
- Sí
- Yes
- Describe Type: Flexible Hose
- End 1 Thread Size: 7/16 In-24
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1962 - Chevrolet P10 Series | Rear Right |
- Brake Hydraulic Hose
- w/3.73 Axle Ratio w/4.11 Axle Ratio
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- No
- Non
- Diámetro interior de la acoplación de extremo 2: 7/16"-24
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- No
- Non
- End 1 Fitting Type:
- Macho
- Male
- End 2 Fitting Inside Diameter:
- 7/16 In-24
- 7/16"-24
- Color:
- Black
- Negro
- Noir
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Outer Sleeve Material:
- Caucho
- Élastomère
- Rubber
- Contenidos del paquete: 1 Manguera Del Freno
- DOT Approved:
- Oui
- Sí
- Yes
- Describe Type: Flexible Hose
- End 1 Thread Size: 7/16 In-24
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
This Part Fits the Following OEM/Substitute Numbers:
150.66000, 2203001, 231400, 315829, 350-52060, 454497, 47593, 476719, 48185H, 610011, 6556440, 87-44000, 88215, 92485, 9750926, B917784, BH188215, BH1882151...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1962 - Chevrolet P10 Series | Rear Left |
- Raybestos R-Line
- Product Attributes:
- Service Type: Per Axle
This Part Fits the Following OEM/Substitute Numbers:
118.62008, 3006122, H7020, H7020T, HW7020
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1962 - Chevrolet P10 Series | Rear |
- Replaces 4534468
- Raybestos Element 3
- Product Attributes:
- Fitting Type, End 2: Male Thread
- Gasket Or Seal Included: No
- Fitting Type, End 1: Female Thread - Sae
- Hose Length, Overall: 13.400
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
150.62001, 176-173, 176-273, 176-288, 188246, 22.1162, 31-66856, 34468, 350-46001, 35007, 36959, 3773168, 3773169, 3910704, 5634468, 5635076, 66856, 7041...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1962 - Chevrolet P10 Series | Front |
- Replaces 454497
- Raybestos Element 3
- Product Attributes:
- Fitting Type, End 2: Male Thread
- Gasket Or Seal Included: No
- Fitting Type, End 1: Female Thread - Sae
- Hose Length, Overall: 16.500
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
047593, 150.66000, 176-1, 176-12, 22.3001, 231400, 24917, 31-4497, 315829, 350-52060, 4497, 47593, 476719, 48185H, 6556440, 87-44000, 88215, 92485...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1962 - Chevrolet P10 Series | Rear Center |
- Brake Hose Lock
- 1 In. Diameter Package Quantity: 1
- Product Attributes:
- Color/Finish:
- Plateado
- Silver
- Inside Diameter (in):
- 0.01 In
- 0.01 In.
- Diámetro interior (in): 0.01 In.
- Contenidos del paquete: Bloqueo De La Manguera Del Freno
- Material:
- Acero Al Carbono
- Carbon Steel
- Color/Finish:
-
Features:
- Direct replacement - this brake hydraulic hose lock clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution - this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This brake hydraulic hose lock clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
1457, F3052S, H1457, H1457-2, H14572, H1457DP, H1457K, H3052S
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1962 - Chevrolet P10 Series | L | 3852 | Front | 6 Cyl 3.8L | 235 |
- Drum Brake Wheel Cylinder
- Bore: 1 In. w/3.73 Axle Ratio w/4.11 Axle Ratio
- Product Attributes:
- Inside Diameter: 1 In
- Tamaño de la rosca de entrada del componente del freno: 3/8-24 In
- Bleeder Screw Included:
- Oui
- Sí
- Yes
- Contenidos del paquete: 1cilindro De Rueda Del Freno De Tambor
- Bleeder Screw Cap Included:
- No
- Non
- Brake Component Inlet Thread Size: 3/8-24 In
- Material:
- Cast Iron
- Hierro Fundido
-
Features:
- Ideal replacement - specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
- Cost-effective fix - replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
- Quality materials - made with high-quality EPDM rubber cups and boots for long-lasting performance
- Professionally tested - wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
- This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.
This Part Fits the Following OEM/Substitute Numbers:
101-1571, 134.64005, 135.64005, 18005633, 18009066, 18E1124, 18E443, 2013387, 2346826, 33004, 375-47050, 5455293, 5456325, 5457151, 5459918, 5461450, 5461483, 5465039...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1962 - Chevrolet P10 Series | Rear Left |
- Brake Hydraulic Hose
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- No
- Non
- Diámetro interior de la acoplación de extremo 2: 7/16"-24
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- No
- Non
- End 1 Fitting Type:
- Macho
- Male
- End 2 Fitting Inside Diameter:
- 7/16 In-24
- 7/16"-24
- Color:
- Black
- Negro
- Noir
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Outer Sleeve Material:
- Caucho
- Élastomère
- Rubber
- Contenidos del paquete: 1 Manguera Del Freno
- DOT Approved:
- Oui
- Sí
- Yes
- Describe Type: Flexible Hose
- End 1 Thread Size:
- 7/16 In-20
- 7/16"-20
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
This Part Fits the Following OEM/Substitute Numbers:
150.62001, 18J2027, 2201162, 350-46001, 3773168, 3773169, 3910704, 4534468, 610094, 87-36001, 87-50001, 88246, B916045, BH188246, BH1882461, BH34468, BH36959, BH66856...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1962 - Chevrolet P10 Series | Front Left |
- Brake Hydraulic Hose
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- No
- Non
- Diámetro interior de la acoplación de extremo 2: 7/16"-24
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- No
- Non
- End 1 Fitting Type:
- Macho
- Male
- End 2 Fitting Inside Diameter:
- 7/16 In-24
- 7/16"-24
- Color:
- Black
- Negro
- Noir
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Outer Sleeve Material:
- Caucho
- Élastomère
- Rubber
- Contenidos del paquete: 1 Manguera Del Freno
- DOT Approved:
- Oui
- Sí
- Yes
- Describe Type: Flexible Hose
- End 1 Thread Size:
- 7/16 In-20
- 7/16"-20
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1962 - Chevrolet P10 Series | Front Right |
Showing 1 - 10 of 16 products
Loading...