Shop By Product Matching "Brake"
Choose your Engine for your 1980 Dodge W200
Image
Product
Price
- 3RD Brake Light Logic Module
- 3RD Brake Light Logic Module
- 3rd Brake Light Logic Module
- Product Attributes:
- Wires: 3
-
Features:
- Compact Easy To Install
- Required when using a single L.E.D. as a third brake light, Pacers Logic Module filters out unwanted turn signal inputs common on domestic vehicles that typically use single filament bulbs.
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Dodge W200 |
- Replaces 4538083 with 4500lb Axle(s) with 3500lb Axle(s)
- Raybestos Element 3
- Product Attributes:
- Fitting Type, End 2: Female Thread - Sae
- Gasket Or Seal Included: No
- Fitting Type, End 1: Block - Sae
- Hose Length, Overall: 23.200
This Part Fits the Following OEM/Substitute Numbers:
04031299, 04115556, 150.67303, 22.3057, 38083, 4031299, 4115556, 87-40303, 88645, BH1668, BH1767, BH188645, BH97659, BHA97659, E-10463, F97659, H97659, HB87303...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Dodge W200 | Rear Center |
- DOT3 Brake Fluid 6/12 OZ
- Prestone Hi-Temp Synthetic DOT 3 Brake Fluid - 12 Oz.
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1980 - Dodge W200 | V | - | 8 Cyl 5.9L | 360 |
- DOT3 Brake Fluid 6/12 OZ
- Brake Fluid; DOT 3; 12 Fluid Ounce; Synthetic
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1980 - Dodge W200 | V | - | 8 Cyl 5.9L | 360 |
- Brake Hydraulic Hose
- 3,500 Lb. Axle
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- No
- Non
- Diámetro interior de la acoplación de extremo 2: 3/8"-24
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- End 1 Fitting Type: Banjo
- Color:
- Black
- Negro
- Noir
- End 2 Fitting Inside Diameter:
- 3/8 In-24
- 3/8"-24
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Axis 1 Length: 9.5
- Outer Sleeve Material:
- Caucho
- Élastomère
- Rubber
- Contenidos del paquete: 1 Manguera De Freno, Empaques
- DOT Approved:
- Oui
- Sí
- Yes
- Describe Type: Flexible Hose
- End 1 Thread Size: 0.44 In
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Dodge W200 | Front Right Outer |
- Brake Hydraulic Hose
- 3,500 Lb. Axle
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- No
- Non
- Diámetro interior de la acoplación de extremo 2: 3/8"-24
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- End 1 Fitting Type: Banjo
- Color:
- Black
- Negro
- Noir
- End 2 Fitting Inside Diameter:
- 3/8 In-24
- 3/8"-24
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Axis 1 Length: 9.5
- Outer Sleeve Material:
- Caucho
- Élastomère
- Rubber
- Contenidos del paquete: 1 Manguera De Freno, Empaques
- DOT Approved:
- Oui
- Sí
- Yes
- Describe Type: Flexible Hose
- End 1 Thread Size: 0.44 In
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
This Part Fits the Following OEM/Substitute Numbers:
150.67009, 150.67079, 18J484, 2201045, 2204110, 350-40123, 3823032, 3894703, 4030474, 4115552, 4538421, 610015, 77024, 87-40009, B917287, B917811, BH177024, BH1770241...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Dodge W200 | Front Left Outer |
- Standard Multi-Purpose Light Bulb Card of 2
- Blister Pack; Miniature Lamp
- Wagner Standard BP1157 Standard Multi-Purpose Light Bulb Card of 2
- Product Attributes:
- Bulb Color: Clear
- Average Rated Life: 1200
- Voltage: 12.800
- Wattage: 26.880
- Secondary Filament Type: C-6
- Amperage Rating: 2.100
- Secondary Average Rated Life: 5000
- Filament Type: C-6
- Secondary Voltage: 14.000
- Secondary Amperage Rating: 0.590
- Filament Quantity: 2
- Secondary Brightness: 3.000
- Secondary Wattage: 8.260
- Bulb Type: Miniature Lamp S-8
- Bulb Base Type: Double Contact Index
- Brightness: 32.000
-
Features:
- MULTIPURPOSE LIGHTING -- Designed for wide range of interior and exterior automotive lighting applications like turn signals, taillights, brake lights and cargo lights
- BUILT TO LAST -- Continuous coil filament resists shock and vibration and improves the life of the bulb
- HIGH QUALITY -- High-grade filament and natural amber glass (application-specific) for dependable long-lasting performance
- DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
- COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture and industrial, marine and powersport applications
- Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1157, 1157-BP, 1157.BP2, 1157/BP2, 1157B2, 1157BP, 1157TB, 9428902, BP1157
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Dodge W200 |
- Brake Hose Lock
- 1 In. Diameter Package Quantity: 1
- Product Attributes:
- Color/Finish:
- Plateado
- Silver
- Inside Diameter (in):
- 0.01 In
- 0.01 In.
- Diámetro interior (in): 0.01 In.
- Contenidos del paquete: Bloqueo De La Manguera Del Freno
- Material:
- Acero Al Carbono
- Carbon Steel
- Color/Finish:
-
Features:
- Direct replacement - this brake hydraulic hose lock clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution - this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This brake hydraulic hose lock clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
1457, F3052S, H1457, H1457-2, H14572, H1457DP, H1457K, H3052S
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Dodge W200 | Front |
- Long Life Multi-Purpose Light Bulb Card of 2
- Blister Pack Long Life Light ; Miniature Lamp
- Wagner Lighting BP1157LL Long Life Multi-Purpose Light Bulb Card of 2
- Product Attributes:
- Bulb Color: Clear
- Average Rated Life: 2000
- Voltage: 12.800
- Wattage: 26.880
- Secondary Filament Type: C-6
- Amperage Rating: 2.100
- Secondary Average Rated Life: 10000
- Filament Type: C-6
- Secondary Voltage: 14.000
- Secondary Amperage Rating: 0.590
- Filament Quantity: 2
- Secondary Brightness: 3.000
- Secondary Wattage: 8.260
- Bulb Type: Miniature Lamp S-8
- Bulb Base Type: Double Contact Index
- Brightness: 32.000
-
Features:
- LONGER LASTING -- Delivers twice the life as compared to Wagner miniature bulbs making it ideal for drivers who need long life from their lights
- DESIGNED FOR HARDWORKING VEHICLES -- Ideal for commercial, emergency, fleet, rideshare and delivery vehicles that drive farther, longer or in challenging conditions
- EXCEPTIONAL DURABILITY -- Extra strong filament withstands vibration and inhibits premature breakage
- SUPERIOR PERFORMANCE -- Unique krypton gas charge for longer life and natural amber glass (application specific) keeps its color
- DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
- COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture and industrial, marine and powersport applications
- Whether you drive a passenger vehicle or a commercial vehicle, Wagner® LongLife HD miniature bulbs are for drivers who need their vehicle and lights to last longer. LongLife HD bulbs deliver twice the life of Wagner miniature bulbs.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1157LL, 1157LL-BP, 1157LL.BP2, 1157LL/BP2, 1157LLB2, 1157LLBP, 1157LLBP2, 88929939, BP1157LL
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Dodge W200 |
- with 4,500 lb. Axle
- Raybestos R-Line
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
077-405, 077-417, 3004306, 3004306RY, 4105419, 4105431, 5412, 5414, 5431, DP5414, DP5431, F106600, F109553, F109553S, F113366S, F73233, F73992, F73992S...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Dodge W200 | Front |
Showing 1 - 10 of 44 products
Loading...