Shop By Product Matching "Brake"
Choose your Engine for your 1986 Dodge D100
Image
Product
Price
- Brake Caliper Bleeder Screw;
- Brake Caliper Bleeder Screw
-
Features:
- Brake Caliper Bleeder Screw
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Dodge D100 | Front |
- 3RD Brake Light Logic Module
- 3RD Brake Light Logic Module
- 3rd Brake Light Logic Module
- Product Attributes:
- Wires: 3
-
Features:
- Compact Easy To Install
- Required when using a single L.E.D. as a third brake light, Pacers Logic Module filters out unwanted turn signal inputs common on domestic vehicles that typically use single filament bulbs.
Additional Fitment Information:
| Vehicle |
|---|
| 1986 - Dodge D100 |
- Replaces 4538243
- Raybestos Element 3
- Product Attributes:
- Fitting Type, End 2: Female Thread - Sae
- Gasket Or Seal Included: No
- Fitting Type, End 1: Block - Sae
- Hose Length, Overall: 26.300
This Part Fits the Following OEM/Substitute Numbers:
04238166, 150.67310, 22.1150, 38243, 4238166, 5638243, 77314, 87-40310, BH106330, BH177314, BH2018, F106330, H106330, HB87310, SBH1302, SP6208
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Dodge D100 | Rear Center |
- DOT3 Brake Fluid 6/12 OZ
- Prestone Hi-Temp Synthetic DOT 3 Brake Fluid - 12 Oz.
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Dodge D100 | V | - | 8 Cyl 5.9L | 360 |
- DOT3 Brake Fluid 6/12 OZ
- Brake Fluid; DOT 3; 12 Fluid Ounce; Synthetic
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Dodge D100 | V | - | 8 Cyl 5.9L | 360 |
- 15-3/4" Length Replaces 4538171
- Raybestos Element 3
- Product Attributes:
- Fitting Type, End 2: Banjo
- Gasket Or Seal Included: Yes
- Fitting Type, End 1: Female Thread - Sae
- Hose Length, Overall: 17.500
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
04036450, 04117811, 04176785, 150.67012, 176-472, 176-695, 177169, 17969, 22.1026, 31-106669, 350-40125, 38171, 4036450, 4117811, 4176785, 532014, 5638171, 77169...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Dodge D100 | Front |
- Replaces BC93949
- Raybestos Element 3
- Product Attributes:
- Cable Diameter (in): 0.125
- Cable Fitting Type, End 1: Barrel
- Cable Fitting Type, End 2: Barrel
- Housing Length, Overall:
- 192.725
- 75.875
- Cable Length, Overall:
- 214.63
- 84.5
This Part Fits the Following OEM/Substitute Numbers:
04294222, 157.93278, 3483, 4294222, 4793278, BC108736, BC1708, BC83278, C1312, C93278, CA5046
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Dodge D100 | Rear Right |
- Standard Multi-Purpose Light Bulb Card of 2
- Match to Original Blister Pack ; Miniature Lamp
- Wagner Standard BP1157 Standard Multi-Purpose Light Bulb Card of 2
- Product Attributes:
- Bulb Color: Clear
- Average Rated Life: 1200
- Voltage: 12.800
- Wattage: 26.880
- Secondary Filament Type: C-6
- Amperage Rating: 2.100
- Secondary Average Rated Life: 5000
- Filament Type: C-6
- Secondary Voltage: 14.000
- Secondary Amperage Rating: 0.590
- Filament Quantity: 2
- Secondary Brightness: 3.000
- Secondary Wattage: 8.260
- Bulb Type: Miniature Lamp S-8
- Bulb Base Type: Double Contact Index
- Brightness: 32.000
-
Features:
- MULTIPURPOSE LIGHTING -- Designed for wide range of interior and exterior automotive lighting applications like turn signals, taillights, brake lights and cargo lights
- BUILT TO LAST -- Continuous coil filament resists shock and vibration and improves the life of the bulb
- HIGH QUALITY -- High-grade filament and natural amber glass (application-specific) for dependable long-lasting performance
- DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
- COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture and industrial, marine and powersport applications
- Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1157, 1157-BP, 1157.BP2, 1157/BP2, 1157B2, 1157BP, 1157TB, 9428902, BP1157
Additional Fitment Information:
| Vehicle |
|---|
| 1986 - Dodge D100 |
- Brake Hydraulic Hose
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- Oui
- Sí
- Yes
- Diámetro interior de la acoplación de extremo 2: 3/8"-24
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- End 1 Fitting Type: Banjo
- Color:
- Black
- Negro
- Noir
- End 2 Fitting Inside Diameter:
- 3/8 In-24
- 3/8"-24
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Axis 1 Length: 14.75
- Outer Sleeve Material:
- Caucho
- Élastomère
- Rubber
- Contenidos del paquete: 1 Manguera De Freno, Empaques
- DOT Approved:
- Oui
- Sí
- Yes
- Describe Type: Flexible Hose
- End 1 Thread Size: 0.44 In
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
This Part Fits the Following OEM/Substitute Numbers:
150.67012, 18J285, 2201026, 350-40125, 4036450, 4176785, 4538171, 612192, 77169, 77211, 87-40012, B917079, BH106669, BH177169, BH1771691, BH177211, BH38171, F106669...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Dodge D100 | Front Left |
- Brake Hydraulic Hose
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- Oui
- Sí
- Yes
- Diámetro interior de la acoplación de extremo 2: 3/8"-24
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- End 1 Fitting Type: Banjo
- Color:
- Black
- Negro
- Noir
- End 2 Fitting Inside Diameter:
- 3/8 In-24
- 3/8"-24
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Axis 1 Length: 14.75
- Outer Sleeve Material:
- Caucho
- Élastomère
- Rubber
- Contenidos del paquete: 1 Manguera De Freno, Empaques
- DOT Approved:
- Oui
- Sí
- Yes
- Describe Type: Flexible Hose
- End 1 Thread Size: 0.44 In
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Dodge D100 | Front Right |
Showing 1 - 10 of 52 products
Loading...