Shop By Product Matching "Brake"
Image
Product
Price
- 3RD Brake Light Logic Module
- 3RD Brake Light Logic Module
- 3rd Brake Light Logic Module
- Product Attributes:
- Wires: 3
-
Features:
- Compact Easy To Install
- Required when using a single L.E.D. as a third brake light, Pacers Logic Module filters out unwanted turn signal inputs common on domestic vehicles that typically use single filament bulbs.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Mazda CX-9 |
- DOT3 Brake Fluid 6/12 OZ
- Brake Fluid; DOT 3; 12 Fluid Ounce; Synthetic
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Mazda CX-9 | V | 3726 | 6 Cyl 3.7L | 227 |
- DOT3 Brake Fluid 6/12 OZ
- Prestone Hi-Temp Synthetic DOT 3 Brake Fluid - 12 Oz.
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Mazda CX-9 | V | 3726 | 6 Cyl 3.7L | 227 |
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.9
- 48.25
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.507
- 12.9
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.84
- 72.15
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 1.102
- 28
- Surface Type: Smooth
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 1.024
- 26
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 114.3
- 4.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.45080, 121.45080, 126.45080CSL, 126.45080CSR, 126.45080SL, 126.45080SR, 127.45080CL, 127.45080CR, 127.45080L, 127.45080R, 128.45080CL, 128.45080CR, 128.45080L, 128.45080R, 14-31481, 227.45080L, 227.45080R, 31481...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Mazda CX-9 | Front |
- Z17 EVOLUTION CERAMIC BRAKE PADS W/ HARDWARE
- Power Stop - Front Z17 Low-Dust Ceramic Brake Pads with Hardware
- Product Attributes:
- Slotted: Yes
- Inner Pad Overall Thickness: 16.8
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 16.8
- Friction Surface Scorched: Yes
- Brake Lubricant Included: No
- Pad Shims Included: Yes
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Wear Indicator Attached: No
- Pad Wear Sensor Included: No
-
Features:
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- Multi-Layer rubberized shims provide virtually noise-free braking
- Chamfered and slotted to ensure noise free braking
- Includes Premium stainless-steel hardware for easy installation
- Positive mold technology for consistent wear and performance
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Thermal scorched pad surface for a fast break-in
- The PowerStop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The PowerStop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
17-1258, 301.12580, 7T4Z 2001-A, BT4Z 2001-A, BT4Z 2001-B, L2Y6-33-23Z, L2Y6-33-28Z, L2Y6-33-28ZA, L2Y63323Z, L2Y63328Z, L2Y63328ZA, MGD1258CH, QC1258, TKY8-33-28Z, TKY83328Z
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Mazda CX-9 | Front |
- Z17 EVOLUTION CERAMIC BRAKE PADS W/ HARDWARE
- Power Stop - Rear Z17 Low-Dust Ceramic Brake Pads with Hardware
- Product Attributes:
- Slotted: Yes
- Inner Pad Overall Thickness: 16.3
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 16.3
- Friction Surface Scorched: Yes
- Brake Lubricant Included: No
- Pad Shims Included: Yes
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Wear Indicator Attached: No
- Pad Wear Sensor Included: No
-
Features:
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- Positive mold technology for consistent wear and performance
- Includes Premium stainless-steel hardware for easy installation
- Multi-Layer rubberized shims provide virtually noise-free braking
- Chamfered and slotted to ensure noise free braking
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Thermal scorched pad surface for a fast break-in
- The PowerStop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The PowerStop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
17-1259, 301.12590, 7T4Z 2200-A, 7T4Z2200A, 8T4Z 2200-A, 8T4Z2200A, L2Y6-26-43Z, L2Y62643Z, L2Y7-26-43Z, L2Y7-26-48Z, L2Y72643Z, L2Y8-26-43ZA, L2Y8-26-43ZB, L2Y82643ZA, L2Y82643ZB, MGD1259CH, QC1259
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Mazda CX-9 | Rear |
- PRIME Ceramic
- Product Attributes:
- Inner Pad Overall Thickness: 17.90
- Grade Type: Premium
- Outer Pad Overall Thickness: 17.90
- Brake System: Akebono
- Brake Lubricant Included: Yes
- Inner Pad Width: 110.60
- Outer Pad Height: 46.40
- Outer Pad Width: 110.60
- Pad Shims Included: Yes
- Inner Pad Height: 46.40
- FMSI Number: 8378-d1259
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Pad Wear Sensor Included: No
- Prepared For Pad Wear Sensor: No
- Weight: 1.15
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0986494376, 105.12590, 13046056052, 16-1259, 17-1259, 2454501, 301.12590, 7T4Z-2V200-AA, 7T4Z2200A, 7T4Z2V200AA, 8T4Z2200A, ACT1259, BC1259, D1259 8378, D1259 8807, DG1259, EHT1259H, FDB4366...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Mazda CX-9 | Rear |
- Raybestos R-Line
- Product Attributes:
- Inner Pad Width: 5.470
- Outer Pad Height: 2.170
- Outer Pad Width: 5.470
- Inner Pad Height: 2.170
- Inner Pad Overall Thickness: 0.222
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 0.222
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
102.12580, 103.12580, 105.12580, 106.12580, 16-1258, 17-1258, 171258, 300.12580, 301.12580, 305.12580, 308.12580, 500.12580, 8377-Z, 8384-Z, ACT1258, BC1258, BP1258, BT4Z2001A...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Mazda CX-9 | Front |
- Replaces PGD1258C
- Raybestos Element 3
- Product Attributes:
- Inner Pad Width: 5.470
- Outer Pad Height: 2.170
- Outer Pad Width: 5.470
- Inner Pad Height: 2.170
- Inner Pad Overall Thickness: 0.222
- Mounting Hardware Included: Yes
- Friction Material Composition: Hybrid
- Outer Pad Overall Thickness: 0.222
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
102.12580, 103.12580, 105.12580, 106.12580, 16-1258, 17-1258, 171258, 21-1258, 300.12580, 301.12580, 305.12580, 308.12580, 500.12580, 8377-Z, 8384-Z, ACT1258, BC1258, BP1258...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Mazda CX-9 | Front |
- Raybestos R-Line
- Product Attributes:
- Inner Pad Width: 4.360
- Outer Pad Height: 1.680
- Outer Pad Width: 4.360
- Inner Pad Height: 1.680
- Inner Pad Overall Thickness: 0.235
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 0.235
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
102.12590, 103.12590, 105.12590, 106.12590, 16-1259, 17-1259, 171259, 300.12590, 301.12590, 305.12590, 308.12590, 500.12590, 7T4Z2200A, 8378-Z, 8T4Z2200A, ACT1259, BC1259, BE1259H...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Mazda CX-9 | Rear |
Showing 1 - 10 of 173 products
Loading...