Shop By Product Matching "Brake"
Image
Product
Price
- DOT3 Brake Fluid 6/12 OZ
- Prestone Hi-Temp Synthetic DOT 3 Brake Fluid - 12 Oz.
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Mitsubishi i-MiEV |
- DOT3 Brake Fluid 6/12 OZ
- Brake Fluid; DOT 3; 12 Fluid Ounce; Synthetic
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Mitsubishi i-MiEV |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Mitsubishi i-MiEV | Rear |
- Rear Drum Brake Shoe For Mitsubishi Lancer Mirage G4 i-MiEV NB-778B
- Top Quality Rear Drum Brake Shoe NB-778B For Mitsubishi Lancer Mirage G4 i-MiEV
- Top Quality
- Product Attributes:
- WebNameEbay4: For Mitsubishi Lancer Mirage G4 I-miev Rear Drum Brake Shoe Nb-778b
- ComponentsSummaryRegularWithBrands: Top Quality Drum Brake Shoe Set
- ComponentsSummaryShort: Drum Brake Shoe Set
- ComponentsSummaryLongWithBrands: 1x Rear Top Quality Drum Brake Shoe Set
- WebNamePlain: Top Quality Rear Drum Brake Shoe Nb-778b
- ComponentsSummaryShortWithBrands: Top Quality Drum Brake Shoe Set
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Rear Drum Brake Shoe Set
- WebNameLong: Top Quality Rear Drum Brake Shoe Nb-778b For Mitsubishi Lancer Mirage G4 I-miev
- WebNameShort: Rear Drum Brake Shoe Nb-778b For Mitsubishi Lancer Mirage G4 I-miev
- ComponentsSummaryRegular: Drum Brake Shoe Set
- WebNameRegular: Top Quality Rear Drum Brake Shoe Nb-778b For Mitsubishi Lancer Mirage G4 I-miev
- WebNameEbay2: [rear] Drum Brake Shoe Nb-778b For Mitsubishi Lancer Mirage G4 I-miev
- WebNameEbay3: Drum Brake Shoe Rear Nb-778b For Mitsubishi Lancer Mirage G4 I-miev
- WebNameEbay: Rear Drum Brake Shoe For Mitsubishi Lancer Mirage G4 I-miev Nb-778b
-
Features:
- Exclusive MetalliX™ Low Resin Semi-Metallic compound provides unmatched braking performance (abrasive friction, high temperature tolerance, quicker compound warming) while maintaining low dust and noise
- Engineered with High Carbon SteelRX™ alloy (Pressure Resistant, Thermal Conductive) and dipped in an Anti-Rust Black Paint to improve durability
- One-Piece Integral Molding Technology improves the durability of the shoes and extends the service life
- True Arc-Ground grinded for perfect friction-to-drum contact and increased torque
- Laser validated for perfect fit, resulting in smooth brake operation and noise reduction
- Bonded or Riveted per OE specifications
- Attached levers and pins included to match OE (on specific applications)
- Part Reference Numbers : 778 NB778 111.07780 778PG 778B
- The TQ shoes offer the most optimal braking component on the market surpassing any competition for drums on the market.
This Part Fits the Following OEM/Substitute Numbers:
778, 778B, NB778
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Mitsubishi i-MiEV | Rear |
- Improved Design
- Quick Bleeders - M10-1.0 X 33mm
- - Pack of 2
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Mitsubishi i-MiEV | Rear |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Mitsubishi i-MiEV | Rear |
- Rear Drum Brake Wheel Cylinder For Mitsubishi Lancer Mirage G4 i-MiEV
- Kingstar Rear Drum Brake Wheel Cylinder 14-WC370155 For Mitsubishi Lancer Mirage G4 i-MiEV
- Kingstar
- Product Attributes:
- WebNameEbay4: For Mitsubishi Lancer Mirage G4 Rear Drum Brake Wheel Cylinder 14-wc370155
- ComponentsSummaryRegularWithBrands: Kingstar Drum Brake Wheel Cylinder
- ComponentsSummaryShort: Drum Brake Wheel Cylinder
- ComponentsSummaryLongWithBrands: 1x Rear Kingstar Drum Brake Wheel Cylinder
- WebNamePlain: Kingstar Rear Drum Brake Wheel Cylinder 14-wc370155
- ComponentsSummaryShortWithBrands: Kingstar Drum Brake Wheel Cylinder
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Rear Drum Brake Wheel Cylinder
- WebNameLong: Kingstar Rear Drum Brake Wheel Cylinder 14-wc370155 For Mitsubishi Lancer Mirage G4 I-miev
- WebNameShort: Rear Drum Brake Wheel Cylinder 14-wc370155 For Mitsubishi Lancer Mirage G4 I-miev
- ComponentsSummaryRegular: Drum Brake Wheel Cylinder
- WebNameRegular: Kingstar Rear Drum Brake Wheel Cylinder 14-wc370155 For Mitsubishi Lancer Mirage G4 I-miev
- WebNameEbay2: [rear] Drum Brake Wheel Cylinder 14-wc370155 For Mitsubishi Lancer Mirage G4
- WebNameEbay3: Drum Brake Wheel Cylinder Rear 14-wc370155 For Mitsubishi Lancer Mirage G4
- WebNameEbay: Rear Drum Brake Wheel Cylinder For Mitsubishi Lancer Mirage G4 I-miev
-
Features:
- Engineered with Heat-Flowed cast iron to give our wheel cylinders the ideal balance between tensile strength and hardness
- Anodized coating provides complete 360º protection against rust, moisture and oxidation
- Reinforced pistons (FeSi) feature higher tolerance to pressure and increased wear resistance
- PCRVi (Pressure Conscious Reducing Valve integrated) reduces pressure buildup
- Trivalent-coated bleeder screws provide extra protection and added durability
- Premium ProSeal™ Nitrile Rubber (NBR) cups and boots for long lasting performance
- Wheel cylinder bores are surface tested to ensure an optimum sealing surface for the pressure cups
- Part Reference Numbers : 34211 WC251390 W610058 WC370155 WC140288
- KingStar wheel cylinders are factory tested with a pressure of 45 psi of dry air to ensure unmatched robustness. The test checks for porosity, leaks, presence, position and quality of cups, surface finish of bores and bleeder seal. All castings meet S.A.E. J431 Standards, and bleeder screws are case hardened for long, reliable life. Brake cups meet S.A.E. Standard J1601. Durable boots are made from premium EPDM rubber, meeting S.A.E. Standar J1604. KingStar wheel cylinders have been the reference accross North America for over 40 years.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
34211, W610058, WC140288, WC251390
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Mitsubishi i-MiEV | Rear |
- Rear Drum Brake Wheel Cylinder Pair For Mitsubishi Lancer Mirage G4 i-MiEV
- Kingstar Rear Drum Brake Wheel Cylinder Pair For Mitsubishi Lancer Mirage G4 i-MiEV K14-100131
- Kingstar
- Product Attributes:
- WebNameEbay4: For Mitsubishi Lancer Mirage G4 I-miev Rear Drum Brake Wheel Cylinder Pair
- ComponentsSummaryRegularWithBrands: 2x Kingstar Drum Brake Wheel Cylinder
- ComponentsSummaryShort: 2x Drum Brake Wheel Cylinder
- ComponentsSummaryLongWithBrands: 2x Rear Kingstar Drum Brake Wheel Cylinder (both Side)
- WebNamePlain: Kingstar Rear Drum Brake Wheel Cylinder Pair K14-100131
- ComponentsSummaryShortWithBrands: 2x Kingstar Drum Brake Wheel Cylinder
- NumberOfPieces: 2
- ComponentsSummaryLong: 2x Rear Drum Brake Wheel Cylinder (both Side)
- WebNameLong: Kingstar Rear Drum Brake Wheel Cylinder Pair For Mitsubishi Lancer Mirage G4 I-miev K14-100131
- WebNameShort: Rear Drum Brake Wheel Cylinder Pair For Mitsubishi Lancer Mirage G4 I-miev K14-100131
- ComponentsSummaryRegular: 2x Drum Brake Wheel Cylinder
- WebNameRegular: Kingstar Rear Drum Brake Wheel Cylinder Pair For Mitsubishi Lancer Mirage G4 I-miev K14-100131
- WebNameEbay2: [rear] Drum Brake Wheel Cylinder Pair For Mitsubishi Lancer Mirage G4 I-miev
- WebNameEbay3: Drum Brake Wheel Cylinder Rear Pair For Mitsubishi Lancer Mirage G4 I-miev
- WebNameEbay: Rear Drum Brake Wheel Cylinder Pair For Mitsubishi Lancer Mirage G4 I-miev
-
Features:
- Engineered with Heat-Flowed cast iron to give our wheel cylinders the ideal balance between tensile strength and hardness
- Anodized coating provides complete 360º protection against rust, moisture and oxidation
- Reinforced pistons (FeSi) feature higher tolerance to pressure and increased wear resistance
- PCRVi (Pressure Conscious Reducing Valve integrated) reduces pressure buildup
- Trivalent-coated bleeder screws provide extra protection and added durability
- Premium ProSeal™ Nitrile Rubber (NBR) cups and boots for long lasting performance
- Wheel cylinder bores are surface tested to ensure an optimum sealing surface for the pressure cups
- Part Reference Numbers : 34211 WC251390 W610058 WC370155 WC140288
- Kit Includes: 2x Rear Drum Brake Wheel Cylinder (Both Side)
- Part Reference Numbers : 34211 WC251390 W610058 WC370155 WC140288
- KingStar wheel cylinders are factory tested with a pressure of 45 psi of dry air to ensure unmatched robustness. The test checks for porosity, leaks, presence, position and quality of cups, surface finish of bores and bleeder seal. All castings meet S.A.E. J431 Standards, and bleeder screws are case hardened for long, reliable life. Brake cups meet S.A.E. Standard J1601. Durable boots are made from premium EPDM rubber, meeting S.A.E. Standar J1604. KingStar wheel cylinders have been the reference accross North America for over 40 years.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Mitsubishi i-MiEV | Rear |
Showing 1 - 8 of 8 products
Loading...