Image
Product
Price
- FMSI Pad No. D888; Vented; 5 Bolt Holes; 320mm Dia.; 49mm Height; 28mm Thick; 68mm Center Hole Dia.
- S4 Kits Redstuff and USR Rotor; Front; FMSI Pad No. D888; Vented; 5 Bolt Holes; 320mm Dia.; 49mm Height; 28mm Thick; 68mm Center Hole Dia.;
- S4 Kits Redstuff and USR Rotor
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Muscle Car/Premium Import Upgrade Kit
- For Spirited Highway Driving
- Lowest Dusting Pads In EBCs Range
- Fine Slotted G3000 Sports Rotors
- Geomet Anti Rust Coating
- Direct Fit
- No Changes Required Over Stock Set Up
- 10
- 000 Mile No Hassle Warranty
- Save 15% over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors pads rotors and caliper lube. If you drive a muscle car or premium import and require better brakes at any speed with LESS DUST this is your Kit choice. High efficiency EBC Pads built with Aramid fiber enhanced with Ceramic granules to further enhance braking,fully shimmed,slotted and chamfered and featuring the patented EBC Brake-in coating for fast pad seating after install deliver great braking power with zero brake fade. Kit includes the EBC fine slotted vented sport rotors for silent braking and cooler brakes and guaranteed flat and parallel pad wear finished with Geomet black anti rust coating.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2014 - Nissan Murano | Front | SV |
- Raybestos R-Line
- Product Attributes:
- Caliper Bracket Surface Finish: Coated
- Caliper Bracket Mounting Hole Size: M12
- Manufacturing Type: Reman
- Friction Material: Semi-metallic
- Disc Brake Caliper Casting Material: Cast Iron
- Bleeder Screw Thread: M7x1.00
- Caliper Bracket Mounting Hole Thread Pitch: 1.25
- Caliper Piston Diameter B: Na
- Casting Number 1: 4319
- Piston Quantity: 1
- Caliper Piston Diameter A: Na
- Caliper Type: Floating
- Caliper Configuration: Loaded
- Caliper Piston Diameter:
- 1.780
- 45.212
This Part Fits the Following OEM/Substitute Numbers:
141.42594, 142.42594, 19-6183, 19-B6036, 19-P3738, 19-P6036, 19-P6183, 331-67669, 440111AA0A, 99-00640A, 9900640A, SC4343-1, SE6587A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Nissan Murano | Rear Left |
- Raybestos R-Line
- Product Attributes:
- Caliper Bracket Surface Finish: Coated
- Caliper Bracket Mounting Hole Size: M12
- Manufacturing Type: Reman
- Friction Material: Semi-metallic
- Disc Brake Caliper Casting Material: Cast Iron
- Bleeder Screw Thread: M7x1.00
- Caliper Bracket Mounting Hole Thread Pitch: 1.25
- Caliper Piston Diameter B: Na
- Casting Number 1: 4319
- Piston Quantity: 1
- Caliper Piston Diameter A: Na
- Caliper Type: Floating
- Caliper Configuration: Loaded
- Caliper Piston Diameter:
- 1.780
- 45.212
This Part Fits the Following OEM/Substitute Numbers:
141.42593, 142.42593, 19-6182, 19-B6037, 19-P3739, 19-P6037, 19-P6182, 331-67668, 440011AA0A, 99-00640B, 9900640B, SC4344-1, SE6588A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Nissan Murano | Rear Right |
- DOT3 Brake Fluid 6/12 OZ
- Prestone Hi-Temp Synthetic DOT 3 Brake Fluid - 12 Oz.
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Nissan Murano | V | 3498 | 6 Cyl 3.5L | - |
- DOT3 Brake Fluid 6/12 OZ
- Brake Fluid; DOT 3; 12 Fluid Ounce; Synthetic
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Nissan Murano | V | 3498 | 6 Cyl 3.5L | - |
- Raybestos Element 3
- Product Attributes:
- Caliper Bracket Surface Finish: Coated
- Caliper Bracket Mounting Hole Size: M12
- Manufacturing Type: Reman
- Friction Material: Semi-metallic
- Disc Brake Caliper Casting Material: Cast Iron
- Bleeder Screw Thread: M7x1.00
- Caliper Bracket Mounting Hole Thread Pitch: 1.25
- Caliper Piston Diameter B: Na
- Casting Number 1: 4319
- Piston Quantity: 1
- Caliper Piston Diameter A: Na
- Caliper Type: Floating
- Caliper Configuration: Loaded
- Caliper Piston Diameter:
- 1.780
- 45.212
This Part Fits the Following OEM/Substitute Numbers:
141.42593, 142.42593, 19-6182, 19-B6037, 19-P3739, 19-P6037, 19-P6182, 331-67668, 440011AA0A, 55-81273, 89X00640B, 99-00640B, C42593, CN4463, SC4344-1, SE6588A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Nissan Murano | Rear Right |
- with 189.5 mm x 27 mm Brakes
- Raybestos R-Line
This Part Fits the Following OEM/Substitute Numbers:
084-1681, 118.42023, 17400, 17512, 3006611, H17568, H7946, HW17400
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Nissan Murano | Rear |
- Replaces H5593 Replaces 505593
- Raybestos R-Line
This Part Fits the Following OEM/Substitute Numbers:
30044148W, 5593, 78-32011, CK132787, F117207S, F118808, F118808S, F132787, F133826S, H5593, H5593AT, H919383, HW5593, HW5629
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Nissan Murano | Front |
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.94
- 49.3
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.495
- 12.55
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.68
- 68.05
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 1.102
- 28
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 1.024
- 26
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 114.3
- 4.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
09.B530.10, 120.42080, 121.42080, 126.42080CSL, 126.42080CSR, 126.42080SL, 126.42080SR, 126097, 127.42080CL, 127.42080CR, 127.42080L, 127.42080R, 128.42080CL, 128.42080CR, 128.42080L, 128.42080R, 14-31375, 145611...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Nissan Murano | Front |
- Replaces PGD888AC
- Raybestos Element 3
- Product Attributes:
- Inner Pad Width: 6.190
- Mounting Hardware Included: Yes
- Friction Material Composition: Hybrid
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
21-888, 41060EG090, D10601MF0A, D10601NC0A, D10601NC0B, D10601NC0C, D10605X00A, D1060EJ20A, D1060ZS60A, D888AC, OEX888A, PD888A, QC888A, SBC888, ZD888A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Nissan Murano | Front |
Showing 1 - 10 of 223 products
Loading...