Shop By Product Matching "Brake"
Choose your Engine for your 2015 INFINITI Q70L
Image
Product
Price
- FMSI Pad No. D888; Vented; 5 Bolt Holes; 320mm Dia.; 49mm Height; 28mm Thick; 68mm Center Hole Dia.
- S4 Kits Redstuff and USR Rotor; Front; FMSI Pad No. D888; Vented; 5 Bolt Holes; 320mm Dia.; 49mm Height; 28mm Thick; 68mm Center Hole Dia.;
- S4 Kits Redstuff and USR Rotor
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Muscle Car/Premium Import Upgrade Kit
- For Spirited Highway Driving
- Lowest Dusting Pads In EBCs Range
- Fine Slotted G3000 Sports Rotors
- Geomet Anti Rust Coating
- Direct Fit
- No Changes Required Over Stock Set Up
- 10
- 000 Mile No Hassle Warranty
- Save 15% over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors pads rotors and caliper lube. If you drive a muscle car or premium import and require better brakes at any speed with LESS DUST this is your Kit choice. High efficiency EBC Pads built with Aramid fiber enhanced with Ceramic granules to further enhance braking,fully shimmed,slotted and chamfered and featuring the patented EBC Brake-in coating for fast pad seating after install deliver great braking power with zero brake fade. Kit includes the EBC fine slotted vented sport rotors for silent braking and cooler brakes and guaranteed flat and parallel pad wear finished with Geomet black anti rust coating.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2015 - INFINITI Q70L | Front |
- FMSI Pad No. D1347; Vented; 350mm Dia.; 62mm Height; 20mm Thick; 68mm Center Hole Dia.; Pad Dimensions: 100 x 60 x 14mm Sport Pkg
- Bluestuff NDX Full Race Brake Pads; FMSI Pad No. D1347; Vented; 350mm Dia.; 62mm Height; 20mm Thick; 68mm Center Hole Dia.; Pad Dimensions: 100 x 60 x 14mm;
- Bluestuff NDX Full Race Brake Pads
- Product Attributes:
- WARNING CA Proposition 65: No
- Caliper Type: Oem
-
Features:
- Worlds First Street And True Track Pad
- Chemical Interlayer Pad For Super Strong Pad Bond
- Easy On Rotors
- Surfaces Are Left Smooth And Not Scored
- Low Heat Transfer
- Great Release
- Deep V Grooves Catches Dirt Dust/Improves Venting
- Huge Lifetime Almost Double Previous EBC Products
- Bluestuff NDX is a high friction sport and race material that can be used for aggressive street driving and certain types of track use. The material has had much success on the track with quality aftermarket calipers (Multi piston systems with better release and cooling and larger rotors) and limited success with street based calipers where pad size and caliper drag can challenge any brake material. The biggest advantage of EBC Bluestuff NDX is their bite from cold and progressive brake feel and the ability to bring a car to a complete stop. This has led to the ECE R90 brake safety regulation approval of R90 which is now completed and certificates are being obtained (during July 2011). There are certain older street based caliper systems where even the new Bluestuff will have trouble handling the caliper and slider drag inherent in the systems but this scenario is exactly the same for our competitors. There is NO material that will be PERFECT on the track in all older street based caliper systems.
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2015 - INFINITI Q70L | Rear |
- Brake Hydraulic Hose
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 1 Flare Type:
- Inverted
- Invertido
- Bracket Included:
- No
- Non
- End 2 Fitting Inside Diameter:
- M10 X 1,0
- M10 X 1.0
- Color:
- Black
- Negro
- Noir
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Longitud total 2 (in): 12.25 In
- Describe Type: Flexible Hose
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- End 2 Flare Type:
- Inverted
- Invertido
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- No
- Non
- Diámetro interior de la acoplación de extremo 2: M10 X 1.0
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- No
- Non
- End 1 Fitting Type:
- Female
- Hembra
- Total Length 2 (In): 12.25 In
- End 2 Fitting Type:
- Female
- Hembra
- Axis 1 Length: 10.13
- Outer Sleeve Material:
- Caucho
- Élastomère
- Rubber
- Contenidos del paquete: 1 Manguera Del Freno
- End 2 Thread Size: M10 X 1.0
- DOT Approved:
- Oui
- Sí
- Yes
- Axis 2 Length: 11.25
- End 1 Thread Size: M10 X 1.0
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
This Part Fits the Following OEM/Substitute Numbers:
150.42092, 2206201, 350-68045, 462111MA4A, BH145047, BH383473, BH383687, F145047
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2015 - INFINITI Q70L | Front Left Inner | RWD |
- DOT3 Brake Fluid 6/12 OZ
- Prestone Hi-Temp Synthetic DOT 3 Brake Fluid - 12 Oz.
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2015 - INFINITI Q70L | V | 3696 | 6 Cyl 3.7L | - |
- DOT3 Brake Fluid 6/12 OZ
- Brake Fluid; DOT 3; 12 Fluid Ounce; Synthetic
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2015 - INFINITI Q70L | V | 3696 | 6 Cyl 3.7L | - |
- Replaces H5593 Replaces 505593
- Raybestos R-Line
This Part Fits the Following OEM/Substitute Numbers:
30044148W, 5593, 78-32011, CK132787, F117207S, F118808, F118808S, F132787, F133826S, H5593, H5593AT, H919383, HW5593, HW5629
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2015 - INFINITI Q70L | Front |
- without Sport Package
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.94
- 49.3
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.495
- 12.55
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.68
- 68.05
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 1.102
- 28
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 1.024
- 26
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 114.3
- 4.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
09.B530.10, 120.42080, 121.42080, 126.42080CSL, 126.42080CSR, 126.42080SL, 126.42080SR, 126097, 127.42080CL, 127.42080CR, 127.42080L, 127.42080R, 128.42080CL, 128.42080CR, 128.42080L, 128.42080R, 14-31375, 145611...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2015 - INFINITI Q70L | Front |
- without Sport Package
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 2.441
- 62
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.497
- 12.6
- Conventional Or Drum-In-Hat Type Rotor: Drum-in-hat
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.68
- 68.05
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Solid
- Nominal Thickness:
- 0.63
- 16
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 0.551
- 14
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 114.3
- 4.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
09.B531.10, 120.42078, 120.42078CRY, 121.42078, 125.42078, 126.42078CSL, 126.42078CSR, 126.42078SL, 126.42078SR, 126095, 127.42078CL, 127.42078CR, 127.42078L, 127.42078R, 128.42078CL, 128.42078CR, 128.42078L, 128.42078R...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2015 - INFINITI Q70L | Rear |
- with Sport Package
- PRIME Ceramic
- Product Attributes:
- Inner Pad Overall Thickness: 15.90
- Grade Type: Premium
- Outer Pad Overall Thickness: 15.90
- Brake System: Akebono
- Brake Lubricant Included: Yes
- Inner Pad Width: 127.10
- Outer Pad Height: 75.10
- Outer Pad Width: 127.10
- Pad Shims Included: Yes
- Inner Pad Height: 75.10
- FMSI Number: 8457-d1346
- Chamfered Edges: No
- Friction Material Composition: Ceramic
- Pad Wear Sensor Type: Mechanical
- Pad Wear Sensor Included: Yes
- Prepared For Pad Wear Sensor: Yes
- Weight: 2.04
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0986494707, 105.13460, 16-1346, 17-1346, 301.13460, ACT1346, ATD1346C, BE1346, D1060-1TG1C, D1060-JL00A, D1060-JL00B, D1060-JL00E, D1060-JL00J, D1060-JL00K, D1060JL00E, D1346 8457, DG1346, FDB4284...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2015 - INFINITI Q70L | Front |
- with Sport Package; Replaces P56084N
- PRIME Ceramic
- Product Attributes:
- Inner Pad Overall Thickness: 15.90
- Grade Type: Premium
- Outer Pad Overall Thickness: 15.90
- Brake System: Akebono
- Brake Lubricant Included: Yes
- Inner Pad Width: 127.10
- Outer Pad Height: 75.10
- Outer Pad Width: 127.10
- Pad Shims Included: Yes
- Inner Pad Height: 75.10
- FMSI Number: 8457-d1346
- Chamfered Edges: No
- Friction Material Composition: Ceramic
- Pad Wear Sensor Type: Mechanical
- Pad Wear Sensor Included: Yes
- Prepared For Pad Wear Sensor: Yes
- Weight: 2.04
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2015 - INFINITI Q70L | Front |
Showing 1 - 10 of 282 products
Loading...