Shop By Product Matching "Brake"
Image
Product
Price
- Raybestos Specialty - Street Performance
- Product Attributes:
- Center Hole Diameter:
- 3.091
- 78.5
- Overall Height:
- 3.362
- 85.4
- Salability Restrictions: No
- Nominal Thickness:
- 0.79
- 20.05
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Discard Thickness:
- 0.73
- 18.55
- Harmonize Code: 8708.30.5030
- UNSPSC Code: 25171715
- ABS Tone Ring Included: No
- Mounting Bolt Hole Circle Diameter:
- 139.7
- 5.5
- Center Hole Diameter:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
22775300
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Cadillac Escalade | Rear |
- 3RD Brake Light Logic Module
- 3RD Brake Light Logic Module
- 3rd Brake Light Logic Module
- Product Attributes:
- Wires: 3
-
Features:
- Compact Easy To Install
- Required when using a single L.E.D. as a third brake light, Pacers Logic Module filters out unwanted turn signal inputs common on domestic vehicles that typically use single filament bulbs.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Cadillac Escalade |
- For Use w/Brake Controls PN[47294/47284/47235/47225]; Plug-In Simple To Hopkins Branded Brake Controls
- Trailer Brake Control Quick Install Harness; For Use w/Brake Controls PN[47294/47284/47235/47225]; Plug-In Simple To Hopkins Branded Brake Controls;
- Trailer Brake Control Quick Install Harness
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Dehp; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
-
Features:
- Plug-In-Simple®
- 36 in. Wire Length
- OEM. Connector Plugs Directly Into Tow Vehicle
- For Vehicles With A Factory Tow Package
- Includes Step-By-Step Instructions And Diagrams
- Easy Install No Cutting/Splicing
- For Use On Any 12 Volt Negative Ground System
- 90 Day Warranty From The Date Of Original Purchase
- Reduce your brake control installation time to minutes! Many of today's tow vehicles come with an Original Equipment Manufacturer connector harness under the dash. This harness simply plugs into the tow vehicle and then plugs into the Hopkins brake control to complete the install.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Cadillac Escalade |
- Raybestos Specialty - Street Performance
- Product Attributes:
- Center Hole Diameter:
- 3.091
- 78.5
- Overall Height:
- 2.165
- 55
- Salability Restrictions: No
- Nominal Thickness:
- 1.18
- 29.95
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Discard Thickness:
- 1.1
- 27.95
- Harmonize Code: 8708.30.5030
- UNSPSC Code: 25171715
- ABS Tone Ring Included: No
- Mounting Bolt Hole Circle Diameter:
- 139.7
- 5.5
- Center Hole Diameter:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.66057, 121.66057, 145582, 177-0918, 18048387, 25819670, 27416, 326223, 55097, 81-126358, 88963556, BD126358, PRT5582, Q4214, YH145582
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Cadillac Escalade | Front |
- Brake Hydraulic Hose
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- Oui
- Sí
- Yes
- Diámetro interior de la acoplación de extremo 2: M12 X 1.0
- Bracket Included:
- Oui
- Sí
- Yes
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- End 1 Fitting Type: Banjo
- Color:
- Black
- Negro
- Noir
- End 2 Fitting Inside Diameter: M12 X 1.0
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Axis 1 Length: 19.63
- Outer Sleeve Material:
- Caucho
- Élastomère
- Rubber
- Contenidos del paquete: 1 Manguera De Freno, Empaques
- DOT Approved:
- Oui
- Sí
- Yes
- Describe Type: Flexible Hose
- End 1 Thread Size: 10 Mm
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
This Part Fits the Following OEM/Substitute Numbers:
150.66132, 150.66140, 15180171, 15875927, 15923783, 176-1515, 18J4624, 2202756, 22829660, 22946995, 23245428, 350-47336, 613121, 84183671, 84331227, BH142757, BH383006, F142757...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Cadillac Escalade | Front Left |
- Brake Hydraulic Hose
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- Oui
- Sí
- Yes
- Diámetro interior de la acoplación de extremo 2: M12 X 1.0
- Bracket Included:
- Oui
- Sí
- Yes
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- End 1 Fitting Type: Banjo
- Color:
- Black
- Negro
- Noir
- End 2 Fitting Inside Diameter: M12 X 1.0
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Axis 1 Length: 19.88
- Outer Sleeve Material:
- Caucho
- Élastomère
- Rubber
- Contenidos del paquete: 1 Manguera De Freno, Empaques
- DOT Approved:
- Oui
- Sí
- Yes
- Describe Type: Flexible Hose
- End 1 Thread Size: 10 Mm
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
This Part Fits the Following OEM/Substitute Numbers:
150.66131, 150.66137, 15180172, 15875928, 15923784, 176-1516, 18J4625, 2202757, 22829661, 22946996, 23245429, 350-47334, 613119, 84183672, 84331228, BH142756, BH383007, F142756...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Cadillac Escalade | Front Right |
- Except 6 Piston Big Brake Kit
- Raybestos R-Line
- Product Attributes:
- Caliper Bracket Surface Finish: Coated
- Caliper Bracket Mounting Hole Size: M14
- Manufacturing Type: Reman
- Friction Material: Semi-metallic
- Disc Brake Caliper Casting Material: Cast Iron
- Bleeder Screw Thread: M10x1.50
- Caliper Bracket Mounting Hole Thread Pitch: 2
- Caliper Piston Diameter B: Na
- Casting Number 1: K247-246c, Z5101, L5101
- Piston Quantity: 2
- Caliper Piston Diameter A: Na
- Caliper Type: Floating
- Caliper Configuration: Loaded
- Caliper Piston Diameter:
- 2.003
- 50.876
This Part Fits the Following OEM/Substitute Numbers:
14-4439, 141.66051, 142.66043, 142.66051, 18-4918A, 18-5480, 18-5481, 18-B4918A, 18-B4918AHD, 18-P4919A, 23276880, 50-01008-1, 99-17399A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Cadillac Escalade | Front Right |
- Except 6 Piston Big Brake Kit
- Raybestos R-Line
- Product Attributes:
- Caliper Bracket Surface Finish: Coated
- Caliper Bracket Mounting Hole Size: M14
- Manufacturing Type: Reman
- Friction Material: Semi-metallic
- Disc Brake Caliper Casting Material: Cast Iron
- Bleeder Screw Thread: M10x1.50
- Caliper Bracket Mounting Hole Thread Pitch: 2
- Caliper Piston Diameter B: Na
- Casting Number 1: K247-245c, Z5101, L5101
- Piston Quantity: 2
- Caliper Piston Diameter A: Na
- Caliper Type: Floating
- Caliper Configuration: Loaded
- Caliper Piston Diameter:
- 2.003
- 50.876
This Part Fits the Following OEM/Substitute Numbers:
14-4438, 141.66052, 142.66044, 142.66052, 18-4919A, 18-B4919A, 18-B4919AHD, 23276878, 331-47223, 50-01007-1, 99-17399B, SC1007-1, SC1008-1
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Cadillac Escalade | Front Left |
- 6 Piston Caliper
- Z17 EVOLUTION CERAMIC BRAKE PADS W/ HARDWARE
- Power Stop - Front Z17 Low-Dust Ceramic Brake Pads with Hardware
- Product Attributes:
- Slotted: Yes
- Inner Pad Overall Thickness: 15.4
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 15.4
- Friction Surface Scorched: Yes
- Brake Lubricant Included: No
- Pad Shims Included: Yes
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Wear Indicator Attached: No
- Pad Wear Sensor Included: No
-
Features:
- Multi-Layer rubberized shims provide virtually noise-free braking
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Includes Premium stainless-steel hardware for easy installation
- Positive mold technology for consistent wear and performance
- Chamfered and slotted to ensure noise free braking
- Thermal scorched pad surface for a fast break-in
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- The PowerStop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The PowerStop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Cadillac Escalade | Front |
- Raybestos Element 3
- Product Attributes:
- Fitting Type, End 2: Banjo
- Gasket Or Seal Included: Yes
- Hose Length, Overall: 21.700
This Part Fits the Following OEM/Substitute Numbers:
150.66132, 150.66140, 15180171, 15875927, 15923783, 22.2756, 22829660, 22946995, 350-47336, 79054, 84331227, BH142757, BH620779, BHA620779, F142757, H620779
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Cadillac Escalade | Front Left |
Showing 1 - 10 of 340 products
Loading...