Image
Product
Price
- 3RD Brake Light Logic Module
- 3RD Brake Light Logic Module
- 3rd Brake Light Logic Module
-
Features:
- Compact Easy To Install
- Required when using a single L.E.D. as a third brake light, Pacers Logic Module filters out unwanted turn signal inputs common on domestic vehicles that typically use single filament bulbs.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Honda Passport |
- Prestone DOT 3 Brake Fluid - 12 fl oz- Synthetic, High Grade, 50,000 Mile
- Product Attributes:
- Minimum Dry Boiling Point:
- 238
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 291
- 300
- Volume: 354.9
- Composition: Synthetic
- Container Type: Plastic Container
- Boiling Point: 401
- Minimum Dry Boiling Point:
- Prestone® DOT 3 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 3. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system. This formula is safe to use in all DOT 3 braking systems (ABS, disc or drum) and can mix with any DOT 3 fluid. It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Honda Passport | V | 3471 | 6 Cyl 3.5L | - |
- Z17 EVO CERAMIC PAD W/HDW
- Z17 EVOLUTION CERAMIC BRAKE PADS W/HARDWARE
- Z17 Evolution Plus Premium Ceramic Brake Pads w/Hardware
- Product Attributes:
- Slotted: Yes
- Inner Pad Overall Thickness: 17.30mm
- Grade Type: Performance
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Cadmium; Chromium [hexavalent Compounds]; Lead; Nickel; Cobalt And Antimony Trioxide Which Are Known To The State Of California To Cause Cancer; And Arsenic; Cadmium And Chromium [hexava
- Outer Pad Overall Thickness: 17.30mm
- Friction Surface Scorched: Yes
- Brake Lubricant Included: No
- Pad Shims Included: Yes
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Pad Wear Sensor Type: Mechanical
- Caliper Type: Oem
- Pad Wear Sensor Included: Yes
-
Features:
- OEM Positive Mold Technology For Consistent Fade Free Performance
- Dual Layer Rubberized Shims Provide 6 Times More Noise Reduction
- Chamfered And Slotted Like The OE Pad
- Includes Premium Stainless Steel Hardware Kit (where applicable)
- Thermal Scorched For Fast Break-In
- The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Honda Passport | Front |
- Premium NAO Ceramic OE Equivalent Pad
- Product Attributes:
- Nominal Thickness (MM): 16.1
- Suface Finishing: Slotted
- Wear Indicator: With Acoustic Wear Indicator
- FMSI: 8397-d1724
- Features: With Hardware
- Specifically designed for the North American market, this Brembo formulated friction material with premium shim offers comfortable, quiet, smooth braking and cleaner wheels.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
43022TZ5A00, 43022TZ5A01, D1724 8397
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2019 - Honda Passport | Rear | EX-L |
- Element3; Hybrid Technology
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Mounting Hardware Included: Yes
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
17-1724, 171724, 43022TG7A00, 43022TZ5A00, 43022TZ5A01, QC1724, SBC1724
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Honda Passport | Rear |
- R-Line
- Product Attributes:
- Overall Height:
- 1.850
- 47.000
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.579
- 14.700
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Harmonize Code: 8708.30.5030
- Inside Diameter:
- 211.500
- 8.327
- Center Hole Diameter:
- 2.762
- 70.150
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 1.102
- 28.000
- Surface Type: Smooth
- Outside Diameter:
- 12.594
- 319.900
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 1.024
- 26.000
- UNSPSC Code: 25171715
- Mounting Bolt Hole Circle Diameter:
- 120.000
- 4.724
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.40092, 120.40092CRY, 121.40092, 126.40092CSL, 126.40092CSR, 126.40092SL, 126.40092SR, 127.40092L, 127.40092R, 128.40092CL, 128.40092CR, 128.40092L, 128.40092R, 14-610044, 320.40092, 45251THRA00, 45251TK8A02, 471381...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Honda Passport | Front |
- Element3; Hybrid Technology
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Inner Pad Width: 6.095
- Outer Pad Height: 2.300
- Outer Pad Width: 6.095
- FMSI Number: D1521-7994
- Inner Pad Height: 2.300
- Inner Pad Overall Thickness: 0.700
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 0.700
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
103.15210, 104.15210, 105.15210, 105.15211, 106.15210, 16-1521, 17-1521, 171521, 26296AL03A, 300.15210, 301.15210, 301.15211, 305.15210, 308.15210, 308.15211, 45022T0AA00, 45022T0AA01, 45022TGSA00...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Honda Passport | Front |
- R-Line; Ceramic
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Inner Pad Width: 6.095
- Outer Pad Height: 2.300
- Outer Pad Width: 6.095
- FMSI Number: D1521-7994
- Inner Pad Height: 2.300
- Inner Pad Overall Thickness: 0.700
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 0.700
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
103.15210, 104.15210, 105.15210, 105.15211, 106.15210, 16-1521, 17-1521, 171521, 26296AL03A, 300.15210, 301.15210, 301.15211, 305.15210, 308.15210, 308.15211, 45022T0AA00, 45022T0AA01, 45022TGSA00...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Honda Passport | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Honda Passport |
- R-Line
- Product Attributes:
- Overall Height:
- 2.488
- 63.200
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.579
- 14.700
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Harmonize Code: 8708.30.5030
- Inside Diameter:
- 236.800
- 9.323
- Center Hole Diameter:
- 2.764
- 70.200
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Solid
- Nominal Thickness:
- 0.433
- 11.000
- Surface Type: Smooth
- Outside Diameter:
- 12.953
- 329.000
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 0.354
- 9.000
- UNSPSC Code: 25171715
- Mounting Bolt Hole Circle Diameter:
- 120.000
- 4.724
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.40091, 120.40091CRY, 121.40091, 12140091, 126.40091CSL, 126.40091CSR, 126.40091SL, 126.40091SR, 127.40091L, 127.40091R, 128.40091L, 128.40091R, 14-610031, 320.40091, 42510TG7A00, 571382, 600-59062, 6612143...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Honda Passport | Rear |
Showing 1 - 10 of 113 products
Loading...