Image
Product
Price
- 3RD Brake Light Logic Module
- 3RD Brake Light Logic Module
- 3rd Brake Light Logic Module
- Product Attributes:
- Wires: 3
-
Features:
- Compact Easy To Install
- Required when using a single L.E.D. as a third brake light, Pacers Logic Module filters out unwanted turn signal inputs common on domestic vehicles that typically use single filament bulbs.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Toyota C-HR |
- Z17 EVOLUTION CERAMIC BRAKE PADS W/ HARDWARE
- Power Stop - Front Z17 Low-Dust Ceramic Brake Pads with Hardware
- Product Attributes:
- Slotted: Yes
- Inner Pad Overall Thickness: 17.6
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 17.6
- Friction Surface Scorched: Yes
- Brake Lubricant Included: No
- Pad Shims Included: Yes
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Wear Indicator Attached: No
- Pad Wear Sensor Included: No
-
Features:
- Thermal scorched pad surface for a fast break-in
- Includes Premium stainless-steel hardware for easy installation
- Chamfered and slotted to ensure noise free braking
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- Multi-Layer rubberized shims provide virtually noise-free braking
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Positive mold technology for consistent wear and performance
- The PowerStop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The PowerStop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Toyota C-HR | Front |
- From 05/2018
- Z17 EVOLUTION CERAMIC BRAKE PADS W/ HARDWARE
- Power Stop - Rear Z17 Low-Dust Ceramic Brake Pads with Hardware
- Product Attributes:
- Slotted: Yes
- Inner Pad Overall Thickness: 15.0
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 15.0
- Friction Surface Scorched: Yes
- Brake Lubricant Included: No
- Pad Shims Included: Yes
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Pad Wear Sensor Type: Mechanical
- Wear Indicator Attached: Yes
- Pad Wear Sensor Included: Yes
-
Features:
- Multi-Layer rubberized shims provide virtually noise-free braking
- Includes Premium stainless-steel hardware for easy installation
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Chamfered and slotted to ensure noise free braking
- Thermal scorched pad surface for a fast break-in
- Positive mold technology for consistent wear and performance
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- The PowerStop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The PowerStop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Toyota C-HR | Rear |
- From 05/2018
- Z17 EVOLUTION CERAMIC BRAKE PADS W/ HARDWARE
- Power Stop - Rear Z17 Low-Dust Ceramic Brake Pads with Hardware
- Product Attributes:
- Slotted: Yes
- Inner Pad Overall Thickness: 15.0
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 15.0
- Friction Surface Scorched: Yes
- Brake Lubricant Included: No
- Pad Shims Included: Yes
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Pad Wear Sensor Type: Mechanical
- Wear Indicator Attached: Yes
- Pad Wear Sensor Included: Yes
-
Features:
- Multi-Layer rubberized shims provide virtually noise-free braking
- Includes Premium stainless-steel hardware for easy installation
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Chamfered and slotted to ensure noise free braking
- Thermal scorched pad surface for a fast break-in
- Positive mold technology for consistent wear and performance
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- The PowerStop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The PowerStop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Toyota C-HR | Rear |
- DOT3 Brake Fluid 6/12 OZ
- Brake Fluid; DOT 3; 12 Fluid Ounce; Synthetic
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Toyota C-HR | L | 1987 | 4 Cyl 2.0L | XLE | 121 |
- DOT3 Brake Fluid 6/12 OZ
- Prestone Hi-Temp Synthetic DOT 3 Brake Fluid - 12 Oz.
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Toyota C-HR | L | 1987 | 4 Cyl 2.0L | XLE | 121 |
- Japan Built Vehicle From 06/2018
- Raybestos R-Line
- Product Attributes:
- Friction Material Attachment: Integrally Molded
- Slotted: Yes
- Inner Pad Overall Thickness: 0.585
- Mounting Hardware Included: Yes
- Salability Restrictions: No
- Outer Pad Overall Thickness: 0.585
- Inner Pad Width: 4.650
- Outer Pad Height: 1.920
- Outer Pad Width: 4.650
- Pad Shims Included: Yes
- Inner Pad Height: 1.920
- FMSI Number: D2202-9443
- Friction Material Slot Type: Slotted
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Pad Wear Sensor Type: Mechanical
- Pad Wear Sensor Attached: Yes
- Pad Wear Sensor Included: Yes
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Toyota C-HR | Rear |
- Except Japan Built Vehicle From 05/2018
- Raybestos R-Line
- Product Attributes:
- Friction Material Attachment: Integrally Molded
- Slotted: Yes
- Inner Pad Overall Thickness: 0.585
- Mounting Hardware Included: Yes
- Salability Restrictions: No
- Outer Pad Overall Thickness: 0.585
- Inner Pad Width: 4.650
- Outer Pad Height: 1.920
- Outer Pad Width: 4.650
- Pad Shims Included: Yes
- Inner Pad Height: 1.920
- FMSI Number: D2202-9443
- Friction Material Slot Type: Slotted
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Pad Wear Sensor Type: Mechanical
- Pad Wear Sensor Attached: Yes
- Pad Wear Sensor Included: Yes
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
04466F4010, PRC2202
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Toyota C-HR | Rear |
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.74
- 44.2
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.571
- 14.5
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Inside Diameter:
- 192.5
- 7.579
- Center Hole Diameter:
- 2.441
- 62
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Solid
- Nominal Thickness: 0.472
- Surface Type: Smooth
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 0.413
- 10.5
- UNSPSC Code: 25171715
- Mounting Bolt Hole Circle Diameter:
- 114.3
- 4.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.44195, 121.44195, 12144195, 126.44195SL, 126.44195SR, 127.44195L, 127.44195R, 128.44195L, 128.44195R, 14-610047, 320.44195, 4243106180, 4243106190, 4243178010, 42431F4010, 44880, 600-75041, 604-75041...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Toyota C-HR | Rear |
- To 05/2018
- Z17 EVOLUTION CERAMIC BRAKE PADS W/ HARDWARE
- Power Stop - Rear Z17 Low-Dust Ceramic Brake Pads with Hardware
- Product Attributes:
- Slotted: Yes
- Inner Pad Overall Thickness: 15.0
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 15.0
- Friction Surface Scorched: Yes
- Brake Lubricant Included: No
- Pad Shims Included: Yes
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Wear Indicator Attached: No
- Pad Wear Sensor Included: No
-
Features:
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Positive mold technology for consistent wear and performance
- Includes Premium stainless-steel hardware for easy installation
- Chamfered and slotted to ensure noise free braking
- Thermal scorched pad surface for a fast break-in
- Multi-Layer rubberized shims provide virtually noise-free braking
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- The PowerStop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The PowerStop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
04466-10010, 04466-78010, 04466-78020, 04466-F4010, 17-1805, 301.18050, 446678010, 446678020, MGD1805CH, QC1805
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Toyota C-HR | Rear |
Showing 1 - 10 of 178 products
Loading...