Image
Product
Price
- 3RD Brake Light Logic Module
- 3RD Brake Light Logic Module
- 3rd Brake Light Logic Module
- Product Attributes:
- Wires: 3
-
Features:
- Compact Easy To Install
- Required when using a single L.E.D. as a third brake light, Pacers Logic Module filters out unwanted turn signal inputs common on domestic vehicles that typically use single filament bulbs.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Mazda CX-30 |
- DOT3 Brake Fluid 6/12 OZ
- Brake Fluid; DOT 3; 12 Fluid Ounce; Synthetic
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - Mazda CX-30 | L | 2488 | 4 Cyl 2.5L | 152 |
- Rotor Diameter 264mm
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.535
- 39
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.524
- 13.3
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.68
- 68.05
- Inside Diameter:
- 174.5
- 6.87
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Solid
- Nominal Thickness: 0.354
- Surface Type: Smooth
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 0.276
- 7
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 114.3
- 4.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2020 - Mazda CX-30 | Rear | AWD |
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.535
- 39
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.524
- 13.3
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.68
- 68.05
- Inside Diameter:
- 174.5
- 6.87
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Solid
- Nominal Thickness: 0.354
- Surface Type: Smooth
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 0.276
- 7
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 114.3
- 4.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
083-3586, 120.45081, 120.45093, 121.45081, 121.45093, 126.45081SL, 126.45081SR, 126.45093SL, 126.45093SR, 127.45081L, 127.45081R, 128.45081L, 128.45081R, 14-610005, 320.45081, 320.45093, 44787, 44933...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2020 - Mazda CX-30 | Rear | FWD |
- Rotor Diameter 302mm
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.56
- 39.6
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.495
- 12.55
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Inside Diameter:
- 212.35
- 8.36
- Center Hole Diameter:
- 2.68
- 68.05
- Stud/Lug Hole Quantity: 5
- Nominal Thickness: 0.394
- Surface Type: Smooth
- Discard Thickness: 0.315
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 114.3
- 4.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.45083, 120.45083CRY, 120.45084, 120.45084CRY, 121.45083, 121.45084, 126.45083SL, 126.45083SR, 126.45084SL, 126.45084SR, 127.45083L, 127.45083R, 127.45084L, 127.45084R, 128.45083L, 128.45083R, 128.45084L, 128.45084R...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2020 - Mazda CX-30 | Rear | AWD |
- PRIME Low-Met
- Product Attributes:
- Inner Pad Overall Thickness: 16
- Grade Type: Premium
- Outer Pad Overall Thickness: 16
- Brake Lubricant Included: No
- Inner Pad Width: 142
- Outer Pad Height: 56
- Abutment Clips Included: No
- Outer Pad Width: 142
- Inner Pad Height: 56
- FMSI Number: D17288952
- WVA Number: 25876, 25875, 25877
- Friction Material Composition: Low-metallic
- Pad Wear Sensor Type: Mechanical
- Pad Wear Sensor Included: Yes
- Prepared For Pad Wear Sensor: Yes
- Weight: 1.64
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0252587516, 0252587516PD, 05P1917, 0986494804, 0986AB3518, 0986T11035, 10080, 1051142, 116323, 12713, 13046056582, 156902, 182171, 184437, 193048, 2156902, 2209920, 223261...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Mazda CX-30 | L | 2488 | Front | 4 Cyl 2.5L | 152 |
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Mazda CX-30 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 2 Per Wheel
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Mazda CX-30 |
- Raybestos Element 3
- Product Attributes:
- Inner Pad Width: 4.839
- Outer Pad Height: 1.657
- Outer Pad Width: 4.839
- Inner Pad Height: 2.012
- Inner Pad Overall Thickness: 0.520
- Mounting Hardware Included: Yes
- Friction Material Composition: Hybrid
- Outer Pad Overall Thickness: 0.520
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
105.22190, 16-2219, 21-2219, BCYA2643Z, BCYA2643ZA, BCYA2643ZAg, BCYA2643ZB, BDYS2643Z, BDYS2643ZA, BDYS2643ZB, CFC2219, DFZ52643ZA, DGY62643Z, SBC2219, Z23-2219
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Mazda CX-30 | Rear |
- Raybestos R-Line
- Product Attributes:
- Inner Pad Width: 4.839
- Outer Pad Height: 1.657
- Outer Pad Width: 4.839
- Inner Pad Height: 2.012
- Inner Pad Overall Thickness: 0.520
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 0.520
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
105.22190, 16-2219, BCYA2643Z, BCYA2643ZA, BCYA2643ZAg, BCYA2643ZB, BDYS2643Z, BDYS2643ZA, BDYS2643ZB, CFC2219, DFZ52643ZA, DGY62643Z, PRC2219, SBC2219, Z23-2219
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Mazda CX-30 | Rear |
Showing 1 - 10 of 149 products
Loading...