Shop By Product Matching "Brake"
Choose your Engine for your 2020 Subaru Legacy
Image
Product
Price
- DOT3 Brake Fluid 6/12 OZ
- Brake Fluid; DOT 3; 12 Fluid Ounce; Synthetic
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - Subaru Legacy | H | 2498 | 4 Cyl 2.5L | 152 |
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.825
- 46.35
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.512
- 13
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.28
- 57.9
- Inside Diameter:
- 205.5
- 8.091
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 0.669
- 17
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 0.591
- 15
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 114.3
- 4.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.47037, 121.47037, 126.47037SL, 126.47037SR, 127.47037L, 127.47037R, 128.47037L, 128.47037R, 26700AL010, 26700AL03A, 320.47037, 44882, 477355, 600-13028, 604-13028, 79507, 79507DG, 79507DL...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Subaru Legacy | Rear |
- PRIME Ceramic
- Product Attributes:
- Inner Pad Overall Thickness: 14.50
- Grade Type: Premium
- Outer Pad Overall Thickness: 14.50
- Brake System: Akebono
- Brake Lubricant Included: Yes
- Inner Pad Width: 123.00
- Outer Pad Height: 47.70
- Outer Pad Width: 123.00
- Pad Shims Included: Yes
- Inner Pad Height: 47.70
- FMSI Number: 9043-d1808
- Chamfered Edges: No
- Friction Material Composition: Ceramic
- Pad Wear Sensor Type: Mechanical
- Pad Wear Sensor Included: Yes
- Prepared For Pad Wear Sensor: Yes
- Weight: 1.01
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0986494836, 105.18080, 13046073422, 16-1808, 17-1808, 2215801, 26696AL000, 26696AL01A, 26696XC00A, 301.18080, ACT1808, BC1808, D1808 9043, DG1808, EHT1808, FDB5244, GDB3639, MGD1808C...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Subaru Legacy | Rear |
- Raybestos R-Line
- Product Attributes:
- Inner Pad Width: 5.720
- Outer Pad Height: 2.300
- FMSI Number: D2045-9275
- Inner Pad Height: 2.300
- Inner Pad Overall Thickness: 0.665
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
105.60260, 26296AN00A, 26296AN020, 26296AN04A, 26296fl030, 26296FL031, 26296FL032, 26296FL05A, 26296FL070, 26296FN000, 26296FN001, 26296FN01A, 2629FL05A, 500.60260, D2045, PMD2045, SBC2045
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Subaru Legacy | Front |
- Raybestos Element 3
- Product Attributes:
- Inner Pad Width: 4.846
- Outer Pad Height: 1.878
- Outer Pad Width: 4.839
- Inner Pad Height: 2.075
- Inner Pad Overall Thickness: 0.543
- Friction Material Composition: Hybrid
- Outer Pad Overall Thickness: 0.543
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
105.18080, 1310180800, 1310180801, 1551180800, 1551180801, 16-1808, 17-1808, 171808, 21-1808, 26696AL000, 26696AL01A, 26696AL020, 26696AN00A, 26696FN00A, 26696VC030, 26696XC00A, 301.18080, 308.18080...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Subaru Legacy | Rear |
- Raybestos R-Line
- Product Attributes:
- Inner Pad Width: 4.846
- Outer Pad Height: 1.878
- Outer Pad Width: 4.839
- Inner Pad Height: 2.075
- Inner Pad Overall Thickness: 0.543
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 0.543
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
105.18080, 1551180800, 1551180801, 16-1808, 17-1808, 26696AL000, 26696AL01A, 26696AL020, 26696AN00A, 26696FN00A, 26696VC030, 26696XC00A, 301.18080, 308.18080, 500.18080, CFC1808, D1808, GMKD1808H...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Subaru Legacy | Rear |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- OE Replacement
- Sold Each. Purchase quantity 1 for 1 wheel
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Subaru Legacy | Rear |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- OE Replacement
- Sold Each. Purchase quantity 1 for 1 wheel
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Subaru Legacy | Front |
- DS-One Drilled and Slotted Performance Rotor
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Subaru Legacy | Front |
- Rear Ceramic Disc Brake Pads For Subaru Outback Crosstrek Forester Ascent WRX
- Rear Ceramic Disc Brake Pads NWF-PRC1808 For Subaru Outback Crosstrek Forester Ascent WRX Legacy
- AmeriPro Ceramic With Hardware
- Product Attributes:
- WebNameEbay4: For Subaru Outback Crosstrek Forester Rear Ceramic Disc Brake Pads Nwf-prc1808
- Friction Material Attachment: Integrally Molded
- Grade Type: Regular
- ComponentsSummaryLongWithBrands: 1x Rear Ameribrakes Disc Brake Pad Set
- WebNamePlain: Rear Ceramic Disc Brake Pads Nwf-prc1808
- ComponentsSummaryShortWithBrands: Ameribrakes Disc Brake Pad Set
- Pad Shims Included: Yes
- ComponentsSummaryLong: 1x Rear Disc Brake Pad Set
- FMSI Number: 9043
- Friction Material Thickness Inner Pad: 13.8
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- WebNameShort: Rear Ceramic Disc Brake Pads Nwf-prc1808 For Subaru Outback Crosstrek Forester Ascent Wrx Legacy
- WebNameEbay: Rear Ceramic Disc Brake Pads For Subaru Outback Crosstrek Forester Ascent Wrx
- Slotted: Yes
- Friction Material Thickness Outer Pad: 13.8
- ComponentsSummaryRegularWithBrands: Ameribrakes Disc Brake Pad Set
- ComponentsSummaryShort: Disc Brake Pad Set
- NumberOfPieces: 1
- Abutment Clips Included: Yes
- WebNameLong: Rear Ceramic Disc Brake Pads Nwf-prc1808 For Subaru Outback Crosstrek Forester Ascent Wrx Legacy
- ComponentsSummaryRegular: Disc Brake Pad Set
- WebNameRegular: Rear Ceramic Disc Brake Pads Nwf-prc1808 For Subaru Outback Crosstrek Forester Ascent Wrx Legacy
- Pad Wear Sensor Included: No
- WebNameEbay2: [rear] Ceramic Disc Brake Pads Nwf-prc1808 For Subaru Outback Crosstrek Forester
- WebNameEbay3: Ceramic Disc Brake Pads Rear Nwf-prc1808 For Subaru Outback Crosstrek Forester
-
Features:
- AmeriBRAKES pads are engineered and made in North America
- Exclusive carbon enhanced materials to ensure optimal all-condition performance
- 1:1 OE Design - Chamfered and slotted only when applicable to ensure safety and perfect fit
- OE Designed shims for virtually no vibration and noiseless braking
- Part Reference Numbers : PRC1808 9043 PF9043X SG9043X SS9043X D1808 1808
- High-temp Silaramic® lubricant and Rubberized wear sensor included
- AmeriBrakes are a 100% North American made brake pad line manufactured in our own plant in Cambridge, Ontario. This allows us to have a continued advantage in the aftermarket for delivering first-to-market products with leading edge technology. AmeriBRAKES are progressive regarding materials and formulation development, we were “first-to-market” with a 100% copper free formula. Along with the engineering and high-quality raw materials that make an exceptional brake pad, it requires continuous hands-on control. Having total control in all areas of the manufacturing process assures 100% product quality all the way through distribution (which cannot always be guaranteed when sourcing across the ocean)
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
1808, 9043, D1808, PF9043X, PRC1808, SG9043X, SS9043X
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Subaru Legacy | Rear |
Showing 1 - 10 of 92 products
Loading...