Shop By Product Matching "Brake"
Image
Product
Price
- PowerStop Evolution Performance Drilled, Slotted & Plated Brake Rotor Pair
- EVOLUTION DRILLED & SLOTTED ZINC PLATED ROTORS (PAIR)
- Power Stop - Front Drilled, Slotted and Zinc Plated Brake Rotor Pair - Contains JBR1309XL & JBR1309XR
- Product Attributes:
- Rust Resistant Coating: Yes
- Overall Height:
- 3.28
- 83.20
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Grade Type: Performance
- Nominal Thickness:
- 1.26
- 32.00
- Surface Type: Slotted X Drilled
- Construction: Full Cast
- Discard Thickness:
- 1.14
- 29.00
- ABS Tone Ring Included: No
- Mounting Bolt Hole Circle Diameter:
- 150.00
- 5.91
-
Features:
- 100% dynamic mill balanced
- Precision cross-drilled for maximum cooling and optimum performance
- Bolt-on upgrade for stock brakes, no modifications necessary
- Zinc plated for protection against corrosion
- Sold as a pair
- Manufactured to strict tolerances for DTV and runout for smooth quiet performance
- Chamfered drill holes and rounded slots to minimize stress cracking
- Slotted friction surface sweeps away gasses, dust, and water
- Weight and vane count match original equipment design
- 100% dynamic mill balanced
- Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.
This Part Fits the Following OEM/Substitute Numbers:
120.44156, 31482, 435120C020, 4351260210, 44587, 980583, BD126490, JBR1309XPR
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Toyota Land Cruiser | Front |
- 3RD Brake Light Logic Module
- 3RD Brake Light Logic Module
- 3rd Brake Light Logic Module
- Product Attributes:
- Wires: 3
-
Features:
- Compact Easy To Install
- Required when using a single L.E.D. as a third brake light, Pacers Logic Module filters out unwanted turn signal inputs common on domestic vehicles that typically use single filament bulbs.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Toyota Land Cruiser |
- PowerStop Evolution Coated Rotor
- EVOLUTION GENUINE GEOMET FULLY COATED ROTORS
- Power Stop - Rear Genuine Geomet Coated Rotor
- Product Attributes:
- Rust Resistant Coating: Yes
- Overall Height:
- 3.00
- 76.10
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Grade Type: Regular
- Nominal Thickness:
- 0.71
- 18.00
- Surface Type: Smooth
- Construction: Full Cast
- Discard Thickness:
- 0.63
- 16.00
- ABS Tone Ring Included: No
- Mounting Bolt Hole Circle Diameter:
- 150.00
- 5.91
-
Features:
- Manufactured to strict tolerances for DTV and runout for smooth quiet performance
- 100% dynamic mill balanced
- Bolt-on replacement, no modifications necessary
- Coated using genuine GEOMET 360 for optimum anti-corrosion protection
- Direct original equipment fit and function
- Weight and vane count match original equipment design
- Power Stop Evolution Coated rotors are a direct bolt-on replacement for factory equipment. Fully coated using Genuine GEOMET rust preventative coating; treated with a thin layer of Genuine GEOMET 360 coating to protect against rust and corrosion without influencing the vehicle's braking performance. Manufactured to original equipment specifications for fitment, weight, vane count, and performance.
- Sold Each. Purchase quantity 1 for 1 wheel
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Toyota Land Cruiser | Rear |
- Trailer Brake Controller Harness; Select Toyota; Lexus
- Includes OEM Connector; 2 ft. Wire; Protective Sleeve; 12 Ga. Wire; w/Quick Plug
- CURT 51362 Quick Plug Electric Trailer Brake Controller Wiring Harness; Select Toyota 4Runner; Land Cruiser; Sequoia; Tacoma; Tundra; Lexus GX; LX
- Brake Control Adapter Harness
- Product Attributes:
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Install Time: 5 Minutes
-
Features:
- Allows Any Curt Brake Control To Be Plugged Into OEM Socket
- Quick Plug Harness Installs In Less Than Ten Minutes
- Wire Colors Match Standard Brake Control Harnesses
- Includes 24 In. Of 12 Gauge Wire For Flexible Installation
- Slit-Loom Sleeve Keeps Wires Contained And Protected
- Made In USA
- A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle's factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Toyota 4Runner, Land Cruiser, Sequoia, Tacoma, Tundra, Lexus GX460, GX470, LX470 and LX570 (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. Theyre also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Toyota Land Cruiser |
- DOT3 Brake Fluid 6/12 OZ
- Brake Fluid; DOT 3; 12 Fluid Ounce; Synthetic
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Toyota Land Cruiser | V | 5663 | 8 Cyl 5.7L | 345 |
- Trailer Brake Controller Harness; Select Toyota; Lexus (Packaged)
- Includes OEM Connector; 2 ft. Wire; Protective Sleeve; 12 Ga. Wire; w/Quick Plug; Package
- CURT 51363 Quick Plug Electric Trailer Brake Controller Wiring Harness; Select Toyota 4Runner; Land Cruiser; Sequoia; Tacoma; Tundra; Lexus GX; LX
- Brake Control Adapter Harness
- Product Attributes:
- Install Time: 5 Minutes
-
Features:
- Allows Any Curt Brake Control To Be Plugged Into OEM Socket
- Quick Plug Harness Installs In Less Than Ten Minutes
- Wire Colors Match Standard Brake Control Harnesses
- Includes 24 In. Of 12 Gauge Wire For Flexible Installation
- Slit-Loom Sleeve Keeps Wires Contained And Protected
- Made In USA
- A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle's factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Toyota 4Runner, Land Cruiser, Sequoia, Tacoma, Tundra, Lexus GX460, GX470, LX470 and LX570 (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. Theyre also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Toyota Land Cruiser |
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 3.278
- 83.25
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.645
- 16.4
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 112
- 4.41
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 1.26
- 32
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 1.142
- 29
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 150
- 5.906
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.44156, 120.44156CRY, 121.44156, 126.44156CSL, 126.44156CSR, 126.44156SL, 126.44156SR, 127.44156CL, 127.44156CR, 127.44156L, 127.44156R, 128.44156CL, 128.44156CR, 128.44156L, 128.44156R, 14-31482, 2031482, 227.44156L...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Toyota Land Cruiser | Front |
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 3
- 76.2
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.645
- 16.4
- Conventional Or Drum-In-Hat Type Rotor: Drum-in-hat
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 112
- 4.41
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 0.709
- 18
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 0.63
- 16
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 150
- 5.906
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.44157, 120.44157CRY, 121.44157, 126.44157CSL, 126.44157CSR, 126.44157SL, 126.44157SR, 127.44157CL, 127.44157CR, 127.44157L, 127.44157R, 128.44157CL, 128.44157CR, 128.44157L, 128.44157R, 14-31483, 227.44157L, 227.44157R...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Toyota Land Cruiser | Rear |
- PRIME Ceramic
- Product Attributes:
- Inner Pad Overall Thickness: 17.90
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 17.90
- Brake System: Advics
- Brake Lubricant Included: Yes
- Features: With Hardware
- Inner Pad Width: 143.60
- Outer Pad Height: 83.00
- Outer Pad Width: 143.60
- Pad Shims Included: Yes
- Inner Pad Height: 83.00
- FMSI Number: 8419-d1303
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Pad Wear Sensor Type: Mechanical
- Pad Wear Sensor Included: Yes
- Prepared For Pad Wear Sensor: Yes
- Weight: 2.4
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
04465-02440, 04465-0C020, 04465-60280, 04465-60281, 044650C020, 0446560280, 0986494449, 105.13030, 13046056182, 16-1303, 17-1303, 2438601, 301.13030, ACT1303, BC1303, D1303 8419, DG1303, EHT1303H...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Toyota Land Cruiser | Front |
- Replaces ATD1304C
- Raybestos Specialty - Truck
- Product Attributes:
- Inner Pad Width: 4.580
- Outer Pad Height: 1.770
- Outer Pad Width: 4.580
- Inner Pad Height: 1.770
- Inner Pad Overall Thickness: 0.220
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 0.220
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0446602340, 044660C010, 0446660120, 0446660160, 0446660161, 102.13040, 103.13040, 105.13040, 106.13040, 16-1304, 17-1304, 171304, 300.13040, 301.13040, 305.13040, 306.13040, 308.13040, 309.13040...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Toyota Land Cruiser | Rear |
Showing 1 - 10 of 187 products
Loading...