Image
Product
Price
- 3RD Brake Light Logic Module
- 3RD Brake Light Logic Module
- 3rd Brake Light Logic Module
- Product Attributes:
- Wires: 3
-
Features:
- Compact Easy To Install
- Required when using a single L.E.D. as a third brake light, Pacers Logic Module filters out unwanted turn signal inputs common on domestic vehicles that typically use single filament bulbs.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Toyota RAV4 Prime |
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.941
- 49.3
- Grade Type: Regular
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.571
- 14.5
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.441
- 62
- Inside Diameter:
- 209.8
- 8.26
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 1.337
- 33.95
- Surface Type: Smooth
- Construction: Full Cast
- Mounting Bolt Hole Quantity: 5
- Misc. Holes: 2
- Bearings Included: No
- Discard Thickness:
- 1.22
- 31
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 114.3
- 4.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.44217, 320.44217, 320.44217F, 4351208060, 4351242070, 4351248140, 4351278020, 60076160, 60476160, 901846, JBR1797, YH720530
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Toyota RAV4 Prime | Front |
- Z36 TRUCK & TOW CARBON-FIBER CERAMIC BRAKE PADS W/ HARDWARE
- Power Stop - Rear Z36 Truck and SUV Carbon-Fiber Ceramic Brake Pads with Hardware Kit
- Product Attributes:
- Slotted: Yes
- Inner Pad Overall Thickness: 14.9
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 14.9
- Friction Surface Scorched: Yes
- Brake Lubricant Included: Yes
- Pad Shims Included: Yes
- Chamfered Edges: Yes
- Friction Material Composition: Carbon Fiber Ceramic
- Wear Indicator Attached: No
- Pad Wear Sensor Included: No
-
Features:
- Includes Premium stainless-steel hardware and ceramic brake lubricant for easy installation
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Positive mold technology for consistent wear and performance
- Chamfered and slotted to ensure noise free braking
- Multi-layer stainless-steel shims for increased heat dissipation & virtually noise-free braking
- Thermal scorched pad surface for a fast break-in
- Carbon-fiber ceramic formulation to provide severe-duty stopping power for Trucks, SUVs, and 4x4's
- Low dust formulation verified in 3rd party on-vehicle testing
- The PowerStop Z36 Truck & Tow ceramic brake pads are designed as an upgrade over stock brakes to reduce brake dust & eliminate noise for those that tow and haul, as well as the off-road enthusiast. These brake pads are made with a low-dust ceramic formula, infused with carbon-fiber to strengthen the compound and provide severe-duty stopping power for trucks and SUVs. Premium stainless-steel hardware along with ceramic brake lubricant is included with the Z36 brake pads making it easier to complete your brake job. Use Z36 Truck & Tow brake pads to give your truck or SUV the severe-duty stopping power it deserves.
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Toyota RAV4 Prime | Rear |
- Z17 EVOLUTION CERAMIC BRAKE PADS W/ HARDWARE
- Power Stop - Rear Z17 Low-Dust Ceramic Brake Pads with Hardware
- Product Attributes:
- Slotted: Yes
- Inner Pad Overall Thickness: 14.9
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 14.9
- Friction Surface Scorched: Yes
- Brake Lubricant Included: No
- Pad Shims Included: Yes
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Wear Indicator Attached: No
- Pad Wear Sensor Included: No
-
Features:
- Positive mold technology for consistent wear and performance
- Multi-Layer rubberized shims provide virtually noise-free braking
- Chamfered and slotted to ensure noise free braking
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- Includes Premium stainless-steel hardware for easy installation
- Thermal scorched pad surface for a fast break-in
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- The PowerStop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The PowerStop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Toyota RAV4 Prime | Rear |
- DOT3 Brake Fluid 6/12 OZ
- Brake Fluid; DOT 3; 12 Fluid Ounce; Synthetic
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Toyota RAV4 Prime | L | 2487 | 4 Cyl 2.5L | 152 |
- Set of 4 caliper covers, Engraved Front and Rear: MGP, Red powder coat finish, s
- 18 inch wheels or larger required.
- Set of 4 caliper covers, Engraved Front and Rear: MGP, Red powder coat finish, silver characters
- Set of 4 caliper covers, Engraved Front and Rear: MGP, Red powder coat finish, silver characters
- Product Attributes:
- Set of: 4
- Meets Or Exceeds OEM Specifications: Yes
- Graphic: Mgp
- Attachment Method: Patented Clip On System
- Material: 6061-t6 Aerospace Grade Aluminum.
-
Features:
- Includes a set of 4 caliper covers and stainlesssteel fastening clips
- Made with 6061T6 Aerospace Grade Aluminum
- Powder Coated for Durability
- Quick and Easy Installation
- about 1 hour
- No glue, adhesives, or special tools required
- Reduces brake dust and dissipates brake heat
- Proudly manufactured in the USA
- MGP Caliper Covers are a car accessory designed and manufactured specifically for your Toyota vehicle to cover up and hide those ugly brake calipers. These aluminum caliper covers are finished with a high-quality powder coat. These red caliper covers will enhance your wheel appearance and curbside appeal. MGP Brake Caliper Covers are tested for safe fitment and are licensed by major manufacturers.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2021 - Toyota RAV4 Prime | SE |
- Raybestos R-Line
- Product Attributes:
- Inner Pad Width: 6.580
- Outer Pad Height: 2.340
- Outer Pad Width: 6.580
- Inner Pad Height: 2.340
- Inner Pad Overall Thickness: 0.220
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 0.220
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0446502500, 0446502560, 044650E010, 044650E040, 0446533500, 0446548150, 0446548170, 0446548210, 0446548230, 0446578010, 0446578020, 102.13240, 103.13240, 105.13240, 106.13240, 1551132400, 16-1324, 17-1324...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Toyota RAV4 Prime | Front |
- Replaces PGD1324C
- Raybestos Element 3
- Product Attributes:
- Inner Pad Width: 6.580
- Outer Pad Height: 2.340
- Outer Pad Width: 6.580
- Inner Pad Height: 2.340
- Inner Pad Overall Thickness: 0.220
- Mounting Hardware Included: Yes
- Friction Material Composition: Hybrid
- Outer Pad Overall Thickness: 0.220
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0446502500, 0446502560, 044650E010, 044650E040, 0446533500, 0446548150, 0446548170, 0446548210, 0446548230, 0446578010, 0446578020, 102.13240, 103.13240, 105.13240, 106.13240, 1551132400, 16-1324, 17-1324...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Toyota RAV4 Prime | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Ultra-Premium OE Ceramic
- with Shims
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Toyota RAV4 Prime | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Toyota RAV4 Prime | Rear |
Showing 1 - 10 of 100 products
Loading...