Image
Product
Price
- For FMSI Pad No. D1665; Solid; 5 Bolt Holes; 315mm Dia.; 51mm Height; 11mm Thick; 63.6mm Center Hole Dia.
- Ultimax OE Style Disc Kit; Rear; For FMSI Pad No. D1665; Solid; 5 Bolt Holes; 315mm Dia.; 51mm Height; 11mm Thick; 63.6mm Center Hole Dia.;
- Ultimax OE Style Disc Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Ultimax OE Style Disc Kit
- EBC Ultimax Slotted Rotors offer you the performance of slotted rotors but without the air noise that is normally associated with slotted rotors. The progressively angled slots on the EBC Ultimax Slotted Brake Rotors offer quiet brake operation without that excessive air noise, while still allowing the slots to help keep your brakes cool. The angled slots pull in cool air for cooler brake operation which helps your brakes perform at their best. The slots also help to clear any excess dust and debris to help keep pad grip to a maximum while also increasing pad longevity.
- Sold Each. Purchase quantity 1 for 1 wheel
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - Ford Edge | Rear | Titanium |
- 3RD Brake Light Logic Module
- 3RD Brake Light Logic Module
- 3rd Brake Light Logic Module
- Product Attributes:
- Wires: 3
-
Features:
- Compact Easy To Install
- Required when using a single L.E.D. as a third brake light, Pacers Logic Module filters out unwanted turn signal inputs common on domestic vehicles that typically use single filament bulbs.
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Ford Edge |
- Raybestos R-Line
This Part Fits the Following OEM/Substitute Numbers:
141.61185, 18-B5503, SC3072
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2022 - Ford Edge | L | 1999 | Front | 4 Cyl 2.0L | 122 |
- For Red Painted Caliper
- Z17 EVOLUTION CERAMIC BRAKE PADS W/ HARDWARE
- Power Stop - Front Z17 Low-Dust Ceramic Brake Pads with Hardware
- Product Attributes:
- Slotted: Yes
- Inner Pad Overall Thickness: 18.3
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 17.7
- Friction Surface Scorched: Yes
- Brake Lubricant Included: No
- Pad Shims Included: Yes
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Wear Indicator Attached: No
- Pad Wear Sensor Included: No
-
Features:
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Positive mold technology for consistent wear and performance
- Chamfered and slotted to ensure noise free braking
- Thermal scorched pad surface for a fast break-in
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- Multi-Layer rubberized shims provide virtually noise-free braking
- Includes Premium hardware for easy installation
- The PowerStop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Hardware is included with the Z17 brake pads making it easier to complete your brake job. The PowerStop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Ford Edge | Front |
- Set of 4 caliper covers, Engraved Front and Rear: Ford Oval Logo, Red powder coa
- Requires 18 inch Wheels or larger
- Set of 4 caliper covers, Engraved Front and Rear: Ford Oval Logo, Red powder coat finish, silver characters
- Product Attributes:
- Set of: 4
- Meets Or Exceeds OEM Specifications: Yes
- Graphic: Ford Oval Logo
- Attachment Method: Patented Clip On System
- Material: 6061-t6 Aerospace Grade Aluminum.
-
Features:
- Includes a set of 4 caliper covers and stainlesssteel fastening clips
- Made with 6061T6 Aerospace Grade Aluminum
- Powder Coated for Durability
- Quick and Easy Installation
- about 1 hour
- No glue, adhesives, or special tools required
- Reduces brake dust and dissipates brake heat
- Proudly manufactured in the USA
- MGP Caliper Covers are a car accessory designed and manufactured specifically for your Ford vehicle to cover up and hide those ugly brake calipers. These aluminum caliper covers are finished with a high-quality powder coat. These red caliper covers will enhance your wheel appearance and curbside appeal. MGP Brake Caliper Covers are tested for safe fitment and are licensed by major manufacturers.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2022 - Ford Edge | ST |
- Set of 4 caliper covers, Engraved Front and Rear: Ford Oval Logo, Red powder coa
- 18 inch wheels or larger required.
- Set of 4 caliper covers, Engraved Front and Rear: Ford Oval Logo, Red powder coat finish, silver characters
- Set of 4 caliper covers, Engraved Front and Rear: Ford Oval Logo, Red powder coat finish, silver characters
- Product Attributes:
- Set of: 4
- Meets Or Exceeds OEM Specifications: Yes
- Graphic: Ford Oval Logo
- Attachment Method: Patented Clip On System
- Material: 6061-t6 Aerospace Grade Aluminum.
-
Features:
- Includes a set of 4 caliper covers and stainlesssteel fastening clips
- Made with 6061T6 Aerospace Grade Aluminum
- Powder Coated for Durability
- Quick and Easy Installation
- about 1 hour
- No glue, adhesives, or special tools required
- Reduces brake dust and dissipates brake heat
- Proudly manufactured in the USA
- MGP Caliper Covers are a car accessory designed and manufactured specifically for your Ford vehicle to cover up and hide those ugly brake calipers. These aluminum caliper covers are finished with a high-quality powder coat. These red caliper covers will enhance your wheel appearance and curbside appeal. MGP Brake Caliper Covers are tested for safe fitment and are licensed by major manufacturers.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2022 - Ford Edge | ST |
- with Solid Rear Rotors
- Raybestos Specialty - Street Performance
- Product Attributes:
- Overall Height:
- 2.008
- 51
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.614
- 15.6
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.5
- 63.5
- Inside Diameter:
- 223.4
- 8.795
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Solid
- Nominal Thickness:
- 0.439
- 11.15
- Surface Type: Smooth
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 0.374
- 9.5
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 108
- 4.252
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.61113, 121.61113, 126.61113SL, 126.61113SR, 127.61113L, 127.61113R, 128.61113L, 128.61113R, 2019881, 320.61113, 42323, 5310798, 5318798, 54194, 600-55005, 612107RGS, 75046DG, 75046DL...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Ford Edge | Rear |
- with Solid Rear Rotors
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 2.008
- 51
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.614
- 15.6
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.5
- 63.5
- Inside Diameter:
- 223.4
- 8.795
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Solid
- Nominal Thickness:
- 0.439
- 11.15
- Surface Type: Smooth
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 0.374
- 9.5
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 108
- 4.252
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.61113, 121.61113, 126.61113SL, 126.61113SR, 127.61113L, 127.61113R, 128.61113L, 128.61113R, 2019881, 320.61113, 42323, 5310798, 5318798, 54194, 600-55005, 612107RGS, 75046DG, 75046DL...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Ford Edge | Rear |
- Except Red Painted Brake Calipers
- Raybestos Specialty - Truck
- Product Attributes:
- Overall Height:
- 2.063
- 52.4
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.618
- 15.7
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.5
- 63.5
- Inside Diameter:
- 217.4
- 8.559
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Solid
- Nominal Thickness:
- 1.26
- 32
- Surface Type: Smooth
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 1.201
- 30.5
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 108
- 4.252
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - Ford Edge | Front | ST |
- Raybestos Specialty - Truck
- Product Attributes:
- Overall Height:
- 2.063
- 52.4
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.618
- 15.7
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.5
- 63.5
- Inside Diameter:
- 217.4
- 8.559
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Solid
- Nominal Thickness:
- 1.26
- 32
- Surface Type: Smooth
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 1.201
- 30.5
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 108
- 4.252
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
121.61120, 12161120, 125.61120, 12561120, 126.61120SL, 126.61120SR, 127.61120L, 127.61120R, 128.61120L, 128.61120R, 14-640006, 320.61120C, 42325, 604-55006, 621801RGS, 681995, 681995R, 901424...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - Ford Edge | Front | ST-Line |
Showing 1 - 10 of 163 products
Loading...