Shop By Product Matching "Brake"
Choose your Submodel for your 2022 Honda CR-V
Image
Product
Price
- 3RD Brake Light Logic Module
- 3RD Brake Light Logic Module
- 3rd Brake Light Logic Module
- Product Attributes:
- Wires: 3
-
Features:
- Compact Easy To Install
- Required when using a single L.E.D. as a third brake light, Pacers Logic Module filters out unwanted turn signal inputs common on domestic vehicles that typically use single filament bulbs.
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Honda CR-V |
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.862
- 47.3
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.496
- 12.6
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.523
- 64.1
- Inside Diameter:
- 212
- 8.346
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 1.102
- 28
- Surface Type: Smooth
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 1.024
- 26
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 114.3
- 4.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.40107, 121.40107, 320.40107F, 45251TLAA50, 901914, BR901914
Additional Fitment Information:
| Vehicle | Position | Fuel Type |
|---|---|---|
| 2022 - Honda CR-V | Front | FULL HYBRID EV-GAS (FHEV) |
- DOT3 Brake Fluid 6/12 OZ
- Brake Fluid; DOT 3; 12 Fluid Ounce; Synthetic
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2022 - Honda CR-V | L | 1497 | 4 Cyl 1.5L | - |
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.854
- 47.1
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.5
- 12.7
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.52
- 64
- Inside Diameter:
- 193.5
- 7.618
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 0.984
- 25
- Surface Type: Smooth
- Construction: Full Cast
- Mounting Bolt Hole Quantity: 5
- Bearings Included: No
- Discard Thickness:
- 0.906
- 23
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 114.3
- 4.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.40096, 121.40096, 126.40096SL, 126.40096SR, 320.40096, 44841, 452513W0A01, 45251TLAA00, 45251TNYA00, 45251TRNH00, 45251TVCA00, 571551, 600-59064, 604-59064, 74040DL, 901610, AX901610, BD180726E...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Honda CR-V | Front |
- Raybestos R-Line
- Product Attributes:
- Inner Pad Width: 4.681
- Outer Pad Height: 1.941
- Outer Pad Width: 4.681
- Inner Pad Height: 1.941
- Inner Pad Overall Thickness: 0.618
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 0.618
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
103.20370, 105.20370, 301.20370, 43022TLAA00, 43022TLAA11, 500.20370, OEX2037, PMD2037, SBC2037, TCD2037, ZD2037
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Honda CR-V | Rear |
- PRIME Ceramic
- Product Attributes:
- Inner Pad Overall Thickness: 17.70
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 18.20
- Brake Lubricant Included: Yes
- Features: With Hardware
- Inner Pad Width: 148.80
- Outer Pad Height: 62.00
- Abutment Clips Included: Yes
- Outer Pad Width: 148.80
- Pad Shims Included: Yes
- Inner Pad Height: 62.00
- FMSI Number: 8840-d2036
- Chamfered Edges: No
- Friction Material Composition: Ceramic
- Pad Wear Sensor Type: Mechanical
- Pad Wear Sensor Included: Yes
- Prepared For Pad Wear Sensor: Yes
- Weight: 2.15
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
2279701, 45022-TLA-A01, 45022-TLA-A10, 45022-TRN-H00, 45022-TRT-J01, ACT2036, D1832 8840, DG1832, EHT2036H, PFB PF8840X, ZD2036
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2022 - Honda CR-V | L | 1497 | Front | 4 Cyl 1.5L | - |
- Raybestos R-Line
- Product Attributes:
- Inner Pad Width: 5.860
- Outer Pad Height: 2.450
- Outer Pad Width: 5.860
- FMSI Number: D2036-8840
- Inner Pad Height: 2.450
- Inner Pad Overall Thickness: 0.665
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 0.665
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
103.20360, 10320360, 105.20360, 10520360, 301.20360, 30120360, 450223D4A50, 45022tlaa01, 45022TLAA02, 45022TLAA10, 45022TRTA00, 45022TRTJ01, 500.20360, OEX2036, PMD2036, SBC2036, TCD2036, ZD2036...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Honda CR-V | Front |
- PRIME Ceramic
- Product Attributes:
- Inner Pad Overall Thickness: 16.50
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 16.50
- Brake System: Nissin
- Brake Lubricant Included: Yes
- Features: With Hardware
- Inner Pad Width: 118.90
- Outer Pad Height: 49.10
- Abutment Clips Included: Yes
- Outer Pad Width: 118.90
- Pad Shims Included: Yes
- Inner Pad Height: 49.10
- FMSI Number: 9268-d2037
- Chamfered Edges: No
- Friction Material Composition: Ceramic
- Pad Wear Sensor Type: Mechanical
- Pad Wear Sensor Included: Yes
- Prepared For Pad Wear Sensor: Yes
- Weight: 1.19
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
105.20370, 13046055302, 16-2037, 17-2037, 2285201, 301.20370, 43022-TLA-A00, 43022-TLA-A11, ACT2037, BC2037, D2037 9268, DG2037, EHT2037H, GDB2217, MGD2037CH, NXT-2037, OEX2037, PFB PF9268X...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Honda CR-V | Rear |
- Raybestos Element 3
- Product Attributes:
- Inner Pad Width: 5.860
- Outer Pad Height: 2.450
- Outer Pad Width: 5.860
- FMSI Number: D2036-8840
- Inner Pad Height: 2.450
- Inner Pad Overall Thickness: 0.665
- Mounting Hardware Included: Yes
- Friction Material Composition: Hybrid
- Outer Pad Overall Thickness: 0.665
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
103.20360, 10320360, 105.20360, 10520360, 17-2036, 21-2036, 301.20360, 30120360, 450223D4A50, 45022tlaa01, 45022TLAA02, 45022TLAA10, 45022TRTA00, 45022TRTJ01, 500.20360, OEX2036, PMD2036, PTC2036...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Honda CR-V | Front |
- Raybestos R-Line
- Product Attributes:
- Inner Pad Width: 6.095
- Outer Pad Height: 2.300
- Outer Pad Width: 6.095
- FMSI Number: D1521-7994
- Inner Pad Height: 2.300
- Inner Pad Overall Thickness: 0.700
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 0.700
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
103.15210, 104.15210, 105.15210, 105.15211, 106.15210, 16-1521, 17-1521, 171521, 26296AL03A, 300.15210, 301.15210, 301.15211, 305.15210, 308.15210, 308.15211, 45022T0AA00, 45022T0AA01, 45022TGSA00...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Fuel Type |
|---|---|---|
| 2022 - Honda CR-V | Front | FULL HYBRID EV-GAS (FHEV) |
Showing 1 - 10 of 196 products
Loading...