Image
Product
Price
- Trailer Brake Controller Harness; Select Nissan; Infiniti
- Includes OEM Connector; 2 ft. Wire; Protective Sleeve; 12 Ga. Wire; w/Quick Plug
- CURT 51382 Quick Plug Electric Trailer Brake Controller Wiring Harness; Select Nissan Armada; Frontier; NV; Pathfinder; Titan; XD; Xterra; Infiniti
- Brake Control Adapter Harness
- Product Attributes:
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Install Time: 5 Minutes
-
Features:
- Allows Any Curt Brake Control To Be Plugged Into OEM Socket
- Quick Plug Harness Installs In Less Than Ten Minutes
- Wire Colors Match Standard Brake Control Harnesses
- Includes 24 In. Of 12 Gauge Wire For Flexible Installation
- Slit-Loom Sleeve Keeps Wires Contained And Protected
- Made In USA
- A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle's factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Nissan Armada, Frontier, NV1500, NV200, NV2500, NV3500, Pathfinder, Titan, Titan XD, Xterra, Infiniti QX56, QX60 and QX80 (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. Theyre also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Nissan Frontier |
- DOT3 Brake Fluid 6/12 OZ
- Brake Fluid; DOT 3; 12 Fluid Ounce; Synthetic
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Nissan Frontier | V | 3779 | 6 Cyl 3.8L | PRO-4X | - |
- Trailer Brake Controller Harness; Select Nissan; Infiniti (Packaged)
- Includes OEM Connector; 2 ft. Wire; Protective Sleeve; 12 Ga. Wire; w/Quick Plug; Package
- CURT 51383 Quick Plug Electric Trailer Brake Controller Wiring Harness; Select Nissan Armada; Frontier; NV; Pathfinder; Titan; XD; Xterra; Infiniti
- Brake Control Adapter Harness
- Product Attributes:
- Install Time: 5 Minutes
-
Features:
- Allows Any Curt Brake Control To Be Plugged Into OEM Socket
- Quick Plug Harness Installs In Less Than Ten Minutes
- Wire Colors Match Standard Brake Control Harnesses
- Includes 24 In. Of 12 Gauge Wire For Flexible Installation
- Slit-Loom Sleeve Keeps Wires Contained And Protected
- Made In USA
- A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle's factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Nissan Armada, Frontier, NV1500, NV200, NV2500, NV3500, Pathfinder, Titan, Titan XD, Xterra, Infiniti QX56, QX60 and QX80 (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. Theyre also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Nissan Frontier |
- Z36 TRUCK & TOW CARBON-FIBER CERAMIC BRAKE PADS W/ HARDWARE
- Power Stop - Rear Z36 Truck and SUV Carbon-Fiber Ceramic Brake Pads with Hardware Kit
- Product Attributes:
- Slotted: Yes
- Inner Pad Overall Thickness: 15.3
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 15.3
- Friction Surface Scorched: Yes
- Brake Lubricant Included: Yes
- Pad Shims Included: Yes
- Chamfered Edges: Yes
- Friction Material Composition: Carbon Fiber Ceramic
- Pad Wear Sensor Type: Mechanical
- Wear Indicator Attached: Yes
- Pad Wear Sensor Included: Yes
-
Features:
- Multi-layer stainless-steel shims for increased heat dissipation & virtually noise-free braking
- Thermal scorched pad surface for a fast break-in
- Includes Premium stainless-steel hardware and ceramic brake lubricant for easy installation
- Chamfered and slotted to ensure noise free braking
- Carbon-fiber ceramic formulation to provide severe-duty stopping power for Trucks, SUVs, and 4x4's
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Low dust formulation verified in 3rd party on-vehicle testing
- Positive mold technology for consistent wear and performance
- The PowerStop Z36 Truck & Tow ceramic brake pads are designed as an upgrade over stock brakes to reduce brake dust & eliminate noise for those that tow and haul, as well as the off-road enthusiast. These brake pads are made with a low-dust ceramic formula, infused with carbon-fiber to strengthen the compound and provide severe-duty stopping power for trucks and SUVs. Premium stainless-steel hardware along with ceramic brake lubricant is included with the Z36 brake pads making it easier to complete your brake job. Use Z36 Truck & Tow brake pads to give your truck or SUV the severe-duty stopping power it deserves.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
106.11000, 44060-EA085, 44060-EA091, 44060EA085, 55810-82Z10, 5581082Z10, D4060-EA01B, D4060EA01B, Z36-1100
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Nissan Frontier | Rear |
- Z17 EVOLUTION CERAMIC BRAKE PADS W/ HARDWARE
- Power Stop - Rear Z17 Low-Dust Ceramic Brake Pads with Hardware
- Product Attributes:
- Slotted: Yes
- Inner Pad Overall Thickness: 15.3
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 15.3
- Friction Surface Scorched: Yes
- Brake Lubricant Included: No
- Pad Shims Included: Yes
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Pad Wear Sensor Type: Mechanical
- Wear Indicator Attached: Yes
- Pad Wear Sensor Included: Yes
-
Features:
- Includes Premium stainless-steel hardware for easy installation
- Chamfered and slotted to ensure noise free braking
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- Positive mold technology for consistent wear and performance
- Thermal scorched pad surface for a fast break-in
- Multi-Layer rubberized shims provide virtually noise-free braking
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- The PowerStop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The PowerStop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
17-1100, 301.11000, 44060-EA085, 44060-EA091, 44060EA085, 55810-82Z10, 5581082Z10, D4060-EA01B, D4060EA01B, MGD1100CH
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Nissan Frontier | Rear |
- Z36 TRUCK & TOW CARBON-FIBER CERAMIC BRAKE PADS W/ HARDWARE
- Power Stop - Front Z36 Truck and SUV Carbon-Fiber Ceramic Brake Pads with Hardware Kit
- Product Attributes:
- Slotted: Yes
- Inner Pad Overall Thickness: 15.0
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 15.0
- Friction Surface Scorched: Yes
- Brake Lubricant Included: Yes
- Pad Shims Included: Yes
- Chamfered Edges: Yes
- Friction Material Composition: Carbon Fiber Ceramic
- Pad Wear Sensor Type: Mechanical
- Wear Indicator Attached: Yes
- Pad Wear Sensor Included: Yes
-
Features:
- Chamfered and slotted to ensure noise free braking
- Low dust formulation verified in 3rd party on-vehicle testing
- Includes Premium stainless-steel hardware and ceramic brake lubricant for easy installation
- Carbon-fiber ceramic formulation to provide severe-duty stopping power for Trucks, SUVs, and 4x4's
- Multi-layer stainless-steel shims for increased heat dissipation & virtually noise-free braking
- Thermal scorched pad surface for a fast break-in
- Positive mold technology for consistent wear and performance
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- The PowerStop Z36 Truck & Tow ceramic brake pads are designed as an upgrade over stock brakes to reduce brake dust & eliminate noise for those that tow and haul, as well as the off-road enthusiast. These brake pads are made with a low-dust ceramic formula, infused with carbon-fiber to strengthen the compound and provide severe-duty stopping power for trucks and SUVs. Premium stainless-steel hardware along with ceramic brake lubricant is included with the Z36 brake pads making it easier to complete your brake job. Use Z36 Truck & Tow brake pads to give your truck or SUV the severe-duty stopping power it deserves.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
19317044, D1060-3LM0A, D1060-ZP00C, D10603LM0A, D1060ZP00C, D10803LM0A, D1M60-CY70B, D1M60CY70B, SX1548, Z36-1548
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Nissan Frontier | Front |
- Z17 EVOLUTION CERAMIC BRAKE PADS W/ HARDWARE
- Power Stop - Front Z17 Low-Dust Ceramic Brake Pads with Hardware
- Product Attributes:
- Slotted: Yes
- Inner Pad Overall Thickness: 15.0
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 15.0
- Friction Surface Scorched: Yes
- Brake Lubricant Included: No
- Pad Shims Included: Yes
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Pad Wear Sensor Type: Mechanical
- Wear Indicator Attached: Yes
- Pad Wear Sensor Included: Yes
-
Features:
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Chamfered and slotted to ensure noise free braking
- Includes Premium stainless-steel hardware for easy installation
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- Positive mold technology for consistent wear and performance
- Multi-Layer rubberized shims provide virtually noise-free braking
- Thermal scorched pad surface for a fast break-in
- The PowerStop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The PowerStop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
17-1548, 19317044, D1060-3LM0A, D1060-ZP00C, D10603LM0A, D1060ZP00C, D10803LM0A, D1M60-CY70B, D1M60CY70B, QC1548
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Nissan Frontier | Front |
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 2.435
- 61.85
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.495
- 12.55
- Conventional Or Drum-In-Hat Type Rotor: Drum-in-hat
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.677
- 68
- Stud/Lug Hole Quantity: 6
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 0.709
- 18
- Mounting Bolt Hole Quantity: 6
- Discard Thickness:
- 0.629
- 16
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 114.3
- 4.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
09.B553.10, 120.42087, 121.42087, 126.42087CSL, 126.42087CSR, 126.42087SL, 126.42087SR, 127.42087CL, 127.42087CR, 127.42087L, 127.42087R, 128.42087CL, 128.42087CR, 128.42087L, 128.42087R, 14-31410, 2031410, 227.42087L...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Nissan Frontier | Rear |
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.5
- 38.1
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.507
- 12.9
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.677
- 68
- Stud/Lug Hole Quantity: 6
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 1.104
- 28.05
- Surface Type: Smooth
- Mounting Bolt Hole Quantity: 6
- Discard Thickness:
- 1.024
- 26
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 114.3
- 4.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
09.B552.10, 09.B552.11, 120.42085, 121.42085, 126.42085CSL, 126.42085CSR, 126.42085SL, 126.42085SR, 126303, 127.42085CL, 127.42085CR, 127.42085L, 127.42085R, 128.42085CL, 128.42085CR, 128.42085L, 128.42085R, 14-31412...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Nissan Frontier | Front |
- Raybestos R-Line
- Product Attributes:
- Inner Pad Width: 4.360
- Outer Pad Height: 1.510
- Outer Pad Width: 4.360
- Inner Pad Height: 1.510
- Inner Pad Overall Thickness: 0.626
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 0.626
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
101.11000, 102.11000, 103.11000, 105.11000, 106.11000, 16-1100, 17-1100, 171100, 300.11000, 301.11000, 305.11000, 308.11000, 44060EA085, 500.11000, 5581082Z10, 8206-Z, ACT1100, BC1100...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Nissan Frontier | Rear |
Showing 1 - 10 of 172 products
Loading...