Image
Product
Price
- Powered Converter Wiring Kit (10 Amps)
- Powered Converter; 20 Ft. Length; For Use w/Battery Powered Taillight Converters; Requires PN[56146]
- CURT 55151 Powered Converter Wiring Kit for Tail Light Converter; 10 Amps
- Wiring Kit
- Product Attributes:
- Connector Style: 4 Flat
-
Features:
- Routes Power From Vehicle Battery To Powered Converter
- Designed For Use w/Battery-Powered Electrical Converters
- 20 ft. Of 12 Gauge Cross-Linked Wire For Flexible Installation
- Made In USA
- When your vehicle does not readily provide an electrical connection for hooking up your trailer, CURT electrical converts offer the solution. Working tail lights on your trailer are absolutely essential any time you tow, and a converter provides an effective way to properly equip your vehicle for safe towing. A CURT electrical converter, much like our custom vehicle-to-trailer wiring harnesses, provides a trailer connector on your vehicle by slicing into the vehicles electrical system. Electrical converters are designed to splice directly into the taillight wiring, rather than plugging into various sockets, giving them the nickname 'taillight converters'. Though it requires a little extra work compared to a custom wiring harness, a tail light converter offers a reliable, long-term connector solution. This converter wiring kit is intended to be used with various CURT powered taillight converters. Powered converters require a direct connection to the vehicles battery, and the powered converter wiring kit #55151 provides all of the components needed to establish a secure connection. The kit includes 20 feet of 12 gauge wire, a 10-amp fuse, an in-line fuse holder, a 3/8 in. ring terminal, a butt connector, a 14-1/2 in. cable tie and eight 6 in. cable ties. This wiring kit is rated at 10 amps and comes included with CURT powered electrical converters #59146, #59187, #59190, #59200 and #59201.
Additional Fitment Information:
| Vehicle |
|---|
| 2002 - Chrysler Sebring |
- Powered 3-to-2-Wire Taillight Converters (30-Pack)
- Protected; Powered; 4 Way Output; Tail Light Circuit 6.0 ; Turn And Brake Circuit 3.0; Req. PN[55151] Converter Or Similar; Bulk 30 Pack
- CURT 56146030 Powered 3-to-2-Wire Splice-in Trailer Tail Light Converter; 4-Pin Wiring Harnesses; 30-Pack
- Powered 3-To-2-Wire Taillight Converter
- Product Attributes:
- Output Type: 4-way Flat
- Turn and Brake Circuits: 3.0 Amp
- Tail Light Circuits: 6.0 Amp
-
Features:
- Converts 3-Wire Vehicle System To Standard 2-Wire Trailer Wiring
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Constructed w/Smt Circuitry For Better Performance/Durability
- Color-Coded Wires For Easier Installation
- Snap Locks Included For Fast Secure Splicing
- No Heavy-Duty Flasher Required
- Dust Cover Included To Keep Connector Clean When Not In Use
- Made In USA
- When your vehicle does not readily provide an electrical connection for hooking up your trailer, CURT electrical converts offer the solution. Working tail lights on your trailer are absolutely essential any time you tow, and a converter provides an effective way to properly equip your vehicle for safe towing. A CURT electrical converter, much like our custom vehicle-to-trailer wiring harnesses, provides a trailer connector on your vehicle by slicing into the vehicles electrical system. Electrical converters are designed to splice directly into the taillight wiring, rather than plugging into various sockets, giving them the nickname "taillight converters". Though it requires a little extra work compared to a custom wiring harness, a tail light converter offers a reliable, long-term connector solution.This package contains 30 converters. These CURT electrical converters are designed to convert a 3-wire system to a 2-wire system and provide a standard 4-way flat connector socket to plug in your trailer. They are made with cutting-edge surface-mount technology (SMT) circuitry, featuring electrical components that are mounted directly to the surface of the board rather than being inserted into a series of holes. SMT circuits have longer life cycles, lower resistance, reduced heat generation and are more reliable than through-hole-mounted components.
Additional Fitment Information:
| Vehicle |
|---|
| 2002 - Chrysler Sebring |
- Class 1 Trailer Hitch; 1-1/4in. Ball Mount; Select Chrysler Sebring
- Includes Std Ball Mount/Pin/Clip; 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Square Main Body~Drilling Required~Visibility: Concealed~Install Time 20 Minutes
- CURT 111903 Class 1 Trailer Hitch with Ball Mount; 1-1/4-In Receiver; Fits Select Chrysler Sebring
- Class I 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 2000
- Body Shape: Square
- Install Time: 20 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- 1 1/4 In. X 1 1/4 In. Ball Mount Features A 3/4 In. Hole
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Chrysler Sebring (see application info to verify fitment). The hitch integrates with the vehicles frame and provides a useful and dependable 1-1/4 in. x 1-1/4 in. receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4 in. trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid Bonderite for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where youre headed or which season of the year you're towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2002 - Chrysler Sebring | V | 2736 | Rear | 6 Cyl 2.7L | GTC | 167 |
- Class 1 Hitch; 1-1/4in. Mount; Select Dodge Stratus; Avenger; Chrysler Sebring
- Includes Std Ball Mount/Pin/Clip; 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Square Main Body~Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 111873 Class 1 Trailer Hitch with Ball Mount; 1-1/4-In Receiver; Fits Select Dodge Stratus; Avenger; Chrysler Sebring
- Class I 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 2000
- Body Shape: Square
- Install Time: 30 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- 1 1/4 In. X 1 1/4 In. Ball Mount Features A 3/4 In. Hole
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Chrysler Sebring, Dodge Avenger and Dodge Stratus (see application info to verify fitment). The hitch integrates with the vehicles frame and provides a useful and dependable 1-1/4 in. x 1-1/4 in. receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4 in. trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid Bonderite for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where youre headed or which season of the year you're towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2002 - Chrysler Sebring | V | 2972 | Rear | 6 Cyl 3.0L | LXi | Coupe | 181 |
- Class 2 Trailer Hitch; 1-1/4in. Ball Mount; Select Chrysler Sebring
- Includes Std Ball Mount/Pin/Clip; 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight Square Main Body~Drilling Required~Visibility: Exposed~Install Time 45 Minutes
- CURT 121863 Class 2 Trailer Hitch with Ball Mount; 1-1/4-In Receiver; Fits Select Chrysler Sebring
- Class II 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- Body Shape: Square
- Install Time: 45 Minutes
- WC Tongue Weight: 350
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- 1 1/4 In. X 1 1/4 In. Ball Mount Features A 3/4 In. Hole
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- A CURT trailer hitch is the key to pursuing your passions, whether youre taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Chrysler Sebring (see application info to verify fitment). It is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight. It is also equipped with 1-1/4 in. x 1-1/4 in. hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4 in. trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid Bonderite for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2002 - Chrysler Sebring | V | 2972 | Rear | 6 Cyl 3.0L | LXi | Sedan | 181 |
- Class 2 Trailer Hitch; 1-1/4in. Receiver; Select Chrysler Sebring
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight Square Main Body~Drilling Required~Visibility: Exposed~Install Time 45 Minutes
- CURT 12186 Class 2 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Chrysler Sebring
- Class II 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- Body Shape: Square
- Install Time: 45 Minutes
- WC Tongue Weight: 350
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/Vehicle Specific Design For Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistance Liquid Bonderite Coating
- Strengthened w/Cast
- Welded
- Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Euro Mount Installs w/No Tools
- Chrome-Plated Trailer ball Fits 1-7/8 in. Couplers
- Whatever the next checkpoint is on your adventure -- whether its getting your bike on the trail before sunrise or making it to the campground before dark -- CURT class 2 hitches let you Bring It with confidence. These receiver hitches are made to handle most light-duty towing applications and offer a custom fit for your vehicle. Typically used on full-size cars, crossovers, compact SUVs, minivans or even compact pickup trucks, a CURT class 2 trailer hitch complements the design of smaller vehicles. This particular class 2 hitch is made to be a custom hitch for certain years of the Chrysler Sebring (to verify vehicle compatibility, see application info). It offers a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. Class 2 trailer hitches can typically be used to tow a variety of lightweight trailers, such as a small utility trailer, small fishing boat trailer or popup camper (NOTE: Never exceed the lowest weight capacity of any towing component). They are also perfect for adding cargo space to your vehicle with a bike rack or cargo carrier. This class 2 hitch features a 1-1/4 in. receiver tube to accept a ball mount shank or other hitch-mounted accessory. For safety, it is tested in accordance with SAE J684. A custom trailer hitch design requires extra care, and as such, CURT class 2 hitches are engineered using real vehicles and hands-on research. We use high-strength steel, robotic welding and rigorous testing to produce hitches that are built to fit your lifestyle. To ensure that each hitch will be a reliable extension of your vehicle, we also finish our hitches in a co-curing of liquid Bonderite and black powder coat, giving them long-lasting rust and wear resistance.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2002 - Chrysler Sebring | V | 2972 | Rear | 6 Cyl 3.0L | LXi | Sedan | 181 |
- Class 1 Hitch; 1-1/4in. Receiver; Select Dodge Stratus; Avenger; Chrysler Sebrin
- 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Square Main Body~Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 11187 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Dodge Stratus; Avenger; Chrysler Sebring
- Class I 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 2000
- Body Shape: Square
- Install Time: 30 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Dodge Stratus, Dodge Avenger and Chrysler Sebring (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2002 - Chrysler Sebring | V | 2972 | Rear | 6 Cyl 3.0L | LXi | Coupe | 181 |
- Class 1 Trailer Hitch; 1-1/4in. Receiver; Select Chrysler Sebring
- 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Square Main Body~Drilling Required~Visibility: Concealed~Install Time 20 Minutes
- CURT 11190 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Chrysler Sebring
- Class I 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 2000
- Body Shape: Square
- Install Time: 20 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Chrysler Sebring (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2002 - Chrysler Sebring | V | 2736 | Rear | 6 Cyl 2.7L | GTC | 167 |
Showing 1 - 8 of 8 products
Loading...