Image
Product
Price
- 2in. Front Receiver Hitch; Select Cadillac; Chevrolet; GMC Trucks; SUVs
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 9000lbs. Straight-Line Pull Drilling Required~Visibility: Concealed~Fascia Trimming Required~Install Time 45 Minutes
- CURT 31012 2-Inch Front Receiver Hitch; Select Cadillac; Chevrolet; GMC Trucks; SUVs
- 2 in Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Provides A Convenient Mount For Hitch Accessories
- Ideal For Attaching A Snow Plow Cargo Carrier/Front Hitch Acc.
- Allows For Easy Maneuvering Of A Trailer Into A Tight Spot
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made In USA
- A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a w in., a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT w in. mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2 in. x 2 in. shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Cadillac Escalade, Chevy Avalanche, Silverado 1500, Suburban 1500 or Tahoe and GMC Sierra 1500 or Yukon (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2008 - GMC Yukon | V | 6162 | Front | 8 Cyl 6.2L | Denali | 376 |
- Dual-Output 7/4-Way Connector (Plugs into USCAR)
- 7-Way And 4-Way For Models w/Factory Tow Package
- CURT 55774 Dual-Output Vehicle-Side 7-Pin; 4-Pin Connectors; Factory Tow Package and USCAR Socket Required
- OEM Vehicle To Trailer Connector w/Harness
- Product Attributes:
- Output Type: 4-way Flat
- Connector Style: 7 Blade And 4 Flat
-
Features:
- Plugs Into Connector To Provide A 4-Way And 7-Way Multi-Socket
- Fits Uscar-Equipped Vehicles w/Factory Tow Plugs
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- 7-Way Round Socket Adds Reverse Lights Electric Brakes
- Dust Covers Included To Keep Connectors Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- Bracket Securely Mounts Wiring To The Vehicle Or Trailer Hitch
- Made In USA
- A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURTs custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicles electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM connector and offers a 4-way flat and 7-way RV blade connector. It comes with a mounting bracket for easy installation and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - GMC Yukon |
- Replacement OE 5-Way Flat Socket (T s into USCAR)
- 2-Wire System; 5 Way Flat For Models w/Factory Tow Package
- CURT 56584 Replacement Vehicle-Side Custom USCAR 5-Pin Trailer Wiring Harness
- Custom Wiring Harness
- Product Attributes:
- Output Type: 5-way Flat
-
Features:
- Plugs Into Socket To Add A 5-Way Flat And Retain Use Of 7-Way
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 5-Way Flat Connects Tail Lights Brake Lights Turn Signals
- Dust Cover Included To Keep Connector Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- Backed By A Limited One-Year Warranty
- Made In USA
- Stress is the last thing you should feel when towing a trailer -- whether youre hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it. CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Though this special socket is not equipped on every vehicle, a CURT custom wiring connector (also called a T-connector) utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicles wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular connector provides a 5-way flat socket while retaining use of the existing OEM 7-way. It is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle). It comes with a dust cover to keep the connector socket clean when not in use.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - GMC Yukon |
- Replacement OE 7-Way RV Blade Socket (Plugs into USCAR)
- For Models w/Factory Tow Package
- CURT 55415 Replacement 7-Way RV Blade Connector; Factory Tow Package and USCAR Socket Required
- Replacement 7-Way RV Blade OEM Socket
-
Features:
- Plugs Into OEM Socket To Provide 7-Way Rave Blade
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 7-Way Connects Tail Brake Reverse Turn Signals Brakes
- Spring-Loaded Dust Cover Keeps Connector Clean When Not In Use
- Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailers electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way RV blade connector is designed to plug into a USCAR socket and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It is intended to be a replacement trailer connector, plugging into a standard USCAR socket (see application info to verify fitment with your vehicle). It features rust-free black plastic construction and comes with a spring-loaded cover to keep out dust and water. This 7-way RV blade connector is a female-end socket, specifically designed for the vehicle side of the connection.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - GMC Yukon |
- Replacement USCAR Socket with 24in. Wires (Vehicle Side)
- 24 in. Bonded Wire For Models w/Factory Tow Package
- CURT 56229 Replacement USCAR Connector Wiring Harness; 24-Inch Wires; 7 Pin Trailer Wiring
- 7-Way USCAR Electrical Connector
-
Features:
- Replaces Damaged Or Missing Uscar Vehicle Harnesses
- Includes 24 In. Color-Coded Bonded Wires For Easy Installation
- Made In USA
- Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailers electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way USCAR replacement harness is designed to replace an existing USCAR plug and supply power for tail lights, turn signals, electric trailer brakes, a battery, reverse lights and brake lights, as well as a ground connection. It features rust-free black plastic construction and comes with color-coded wires and 24 in. of bonded wire for easy splicing into your vehicles wiring system. This 7-way USCAR connector is a female-end socket, specifically designed for the vehicle side of the connection.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - GMC Yukon |
- Replacement OE 4-Way Flat Socket (T s into USCAR)
- 2-Wire System; 4-Way Flat; Packaged; Retains Use of 7 Way Round Connector For Models w/Factory Tow Package
- CURT 55384 Replacement Vehicle-Side Custom USCAR 4-Pin Trailer Wiring Harness
- Custom Wiring Connector
- Product Attributes:
- Output Type: 4-way Flat
-
Features:
- Plugs Into Socket To Add A 4-Way Flat And Retain Use Of 7-Way
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Dust Cover Included To Keep Connector Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- Backed By A Limited One-Year Warranty
- Made In USA
- Stress is the last thing you should feel when towing a trailer -- whether youre hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it. CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Though this special socket is not equipped on every vehicle, a CURT custom wiring connector (also called a T-connector) utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicles wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular connector provides a 4-way flat socket while retaining use of the existing OEM 7-way. It is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle). It comes with a dust cover to keep the connector socket clean when not in use.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - GMC Yukon |
- 20 in.; USCAR To USCAR For Models w/Factory Tow Package
- CURT 56475 24in. USCAR Wiring Extension Harness
- Custom Wiring Harness Extension
-
Features:
- Adds Extra Length For Easier Installation Of Curt Echo In-line Brake Controller
- Connects OEM USCAR Socket To USCAR Connector [Not Included]
- Simple Plug-And-Play Design Eliminates The Need For Cutting Or Splicing
- Slit Loom Keeps Wires Contained And Well Protected
- This CURT USCAR extension harness is designed to help ease the installation process of the CURT Echo in-line brake controller, providing 20 in. of extra length for more flexible positioning of the brake control module. It connects USCAR to USCAR and comes with a slit loom sleeve to protect the wires.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - GMC Yukon |
- Dual-Output 6/4-Way Connector (Plugs into USCAR)
- 6-Way And 4-Way; Plugs Into USCAR For Models w/Factory Tow Package
- CURT 55664 Dual-Output Vehicle-Side 6-Pin; 4-Pin Connectors; Factory Tow Package and USCAR Socket Required
- OEM Vehicle To Trailer Connector w/Harness
- Product Attributes:
- Output Type: 4-way Flat
- Connector Style: 6 Pole Round And 4 Flat
-
Features:
- Plugs Into Connector To Provide A 4-Way And 6-Way Multi-Socket
- Fits Uscar-Equipped Vehicles w/Factory Tow Plugs
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- 6-Way Round Socket Adds Connection For Electric Brakes
- Dust Covers Included To Keep Connectors Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- Bracket Securely Mounts Wiring To The Vehicle Or Trailer Hitch
- Made In USA
- A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURTs custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicles electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM USCAR connector and offers a 4-way flat and 6-way round connector (see application info to verify fitment with your vehicle). It also comes with a mounting bracket for easy installation. CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - GMC Yukon |
- Replacement OE 7-Way RV Blade Socket (Twists into USCAR)
- Twist-In For Models w/Factory Tow Package
- CURT 56415 Replacement Twist-Lock Vehicle-Side RV Blade 7-Pin Connector; Factory Tow Package and USCAR Socket Required
- Replacement 7-Way RV Blade OEM Socket
-
Features:
- Plugs Into OEM Socket To Provide 7-Way Rave Blade
- Twist-In Plug-And-Play Design Eliminates The Need For Splicing
- 7-Way Connects Tail Brake Reverse Turn Signals Brakes
- Spring-Loaded Dust Cover Keeps Connector Clean When Not In Use
- Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailers electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way OEM USCAR replacement connector is designed to plug into a twist-in OEM vehicle socket and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It features rust-free black plastic construction and comes with a spring-loaded cover to keep out dust and water. This 7-way RV blade connector is a female-end socket, specifically designed for the vehicle side of the connection (see application info to verify fitment with your vehicle).
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - GMC Yukon |
- Replacement OE 5-Way Flat Socket (Plugs into USCAR)
- 2-Wire System; 5-Way Flat For Models w/Factory Tow Package
- CURT 56515 Replacement Vehicle-Side 5-Pin Connector; Factory Tow Package and USCAR Socket Required
- Custom Wiring Connector
- Product Attributes:
- Output Type: 5-way Flat
-
Features:
- Plugs Into Existing Vehicle Socket To Provide 5-Way Flat Socket
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 5-Way Flat Connects Tail Lights Brake Lights Turn Signals
- Dust Cover Included To Keep Connector Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- Backed By A Limited One-Year Warranty
- Made In USA
- A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURTs custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicles electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This custom wiring connector provides a 5-way flat connector socket and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - GMC Yukon |
Showing 1 - 10 of 14 products
Loading...