Image
Product
Price
- Custom Wiring; 4-Flat; Select Mazda 3; 6; CX7; Toyota Camry; Corolla; FJ Cruiser
- Circuit Protected And Powered; 3-Wire System; 4 Way Flat; Tail Light Circuit 6.0 Amps; Turn And Brake Circuits 3.0 Amps Install Time 25 Minutes
- CURT 55567 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Mazda 3; 6; CX-7; Toyota Camry; Corolla; FJ Cruiser
- Custom Wiring Harness
- Product Attributes:
- Output Type: 4-way Flat
- Electrical System Type: 3w
- Converter Type: Circuit Protected Powered
- Install Time: 25 Minutes
- Turn and Brake Circuits: 3.0 Amp
- Tail Light Circuits: 6.0 Amp
-
Features:
- Plugs Into Tail Light Assembly To Provide A 4-Way Flat Socket
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Equipped w/A Powered 3-Wire To 2-Wire Tail Light Converter
- Constructed w/Smt Circuitry For Better Performance And Durability
- Dust Cover Included To Keep Connector Clean When Not In Use
- Backed By A Limited One-Year Warranty
- Made In USA
- If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Mazda 3, 6 and CX7 and Toyota Camry, Corolla and FJ Cruiser (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe its the boat landing at your favorite fishing spot, maybe its a campsite that overlooks one of natures masterpieces, or maybe its the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Mazda 6 |
- Class 1 Hitch; 1-1/4in. Receiver; Select Fusion; MKZ; Zephyr; Mazda 6; Milan
- 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Square Main Body~Drilling Required~Visibility: Concealed~Install Time 45 Minutes
- CURT 11329 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Ford Fusion; Lincoln MKZ; Zephyr; Mazda 6; Mercury Milan
- Class I 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 2000
- Body Shape: Square
- Install Time: 45 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Ford Fusion, Lincoln MKZ, Lincoln Zephyr, Mazda 6 and Mercury Milan (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2008 - Mazda 6 | L | 2260 | Rear | 4 Cyl 2.3L | i | - |
- Class 1 Hitch; 1-1/4in. Mount; Select Fusion; MKZ; Zephyr; Mazda 6; Milan
- Includes Std Ball Mount/Pin/Clip; 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Square Main Body~Drilling Required~Visibility: Concealed~Install Time 45 Minutes
- CURT 113293 Class 1 Trailer Hitch with Ball Mount; 1-1/4-In Receiver; Fits Select Ford Fusion; Lincoln MKZ; Zephyr; Mazda 6; Mercury Milan
- Class I 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 2000
- Body Shape: Square
- Install Time: 45 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- 1 1/4 In. X 1 1/4 In. Ball Mount Features A 3/4 In. Hole
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Ford Fusion, Lincoln MKZ, Lincoln Zephyr, Mazda 6 and Mercury Milan (see application info to verify fitment). The hitch integrates with the vehicles frame and provides a useful and dependable 1-1/4 in. x 1-1/4 in. receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4 in. trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid Bonderite for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where youre headed or which season of the year you're towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2008 - Mazda 6 | L | 2260 | Rear | 4 Cyl 2.3L | i | - |
Showing 1 - 3 of 3 products
Loading...