Image
Product
Price
- 4 Way Flat Output; Converts 2-Wire/3-Wire/PWM ST System To 2-Wire Trailer Light Wiring; Includes Powered Converter Wiring Kit PN[55152]
- CURT 59236 Weather-Resistant Multi-Function Splice-in Trailer Tail Light Converter Kit; 4-Pin Wiring Harness
- Multi-Function Taillight Converter Kit
- Product Attributes:
- Output Type: 4-way Flat
-
Features:
- Converts 2-Wire 3-Wire Or Pwm St System To 2-Wire Trailer Light
- Enclosure Significantly Increases Water And Vibration Resistance
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Constructed w/Smt Circuitry For Better Performance And Durability
- Microcontroller Senses Current To Rapidly React To Overload
- Provides Improved Overload Short-Circuit And Thermal Protection
- Low-Voltage Operation Allows Function Down To Seven Volts
- Color-Coded Wires w/Wiring Guide For Easier Installation
- Snap Locks Included For Fast Secure Splicing
- Dust Cover Included To Keep Connector Clean When Not In Use
- Made In USA
- Rain, road grime and salt can deal a vicious blow to your trailer wiring, and it takes electrical components with an extra-thick shell to stand up to the elements. The CURT multi-function electrical converter is an advanced taillight converter that offers the ultimate in vehicle compatibility and weather resistance, giving you a reliable wiring connection any season of the year. The potted design seals the internal electrical components in a watertight enclosure and is filled with a solid compound to protect against impacts, vibrations and moisture for long-lasting use, even on the exterior of the vehicle. The converter also features our advanced surface mount technology (SMT), using smaller components mounted directly to the surface of the circuit board. This produces lower resistance, reduced heat generation, longer life cycles and higher reliability. The CURT multi-function electrical converter comes with pigtail wires that are able to be spliced into two-wire, three-wire or PWM wiring system with combined stop and taillights. It converts any of these systems to a simple two-wire system, using a standard 4-way flat output, to be compatible with most trailer wiring. The converter is controlled using a microprocessor that is able to sense the current passing through it, allowing for quick reaction to dangerous conditions such as overload and short circuits. It also filters unwanted input signals to protect your wiring systems and uses a mere seven volts for low-voltage operation. The CURT multi-function taillight converter is a heavy-duty electrical converter for virtually any vehicle-trailer combination. It comes with color-coded wires and an easy-to-read wiring guide, as well as a dust cover to protect the 4-way flat connector. This package includes a powered converter wiring kit #55152 and four snap locks for faster, more secure splicing.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2014 - Chevrolet Malibu | Eco |
- Class 2 Hitch; 1-1/4in. Receiver; Select LaCrosse; Regal; XTS; Impala; Malibu
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 25 Minutes
- CURT 12115 Class 2 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Buick LaCrosse; Regal; Cadillac XTS; Chevy Impala; Malibu
- Class II 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- Body Shape: Square
- Install Time: 25 Minutes
- WC Tongue Weight: 350
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever the next checkpoint is on your adventure -- whether its getting your bike on the trail before sunrise or making it to the campground before dark -- CURT class 2 hitches let you Bring It with confidence. These receiver hitches are made to handle most light-duty towing applications and offer a custom fit for your vehicle. Typically used on full-size cars, crossovers, compact SUVs, minivans or even compact pickup trucks, a CURT class 2 trailer hitch complements the design of smaller vehicles. This particular class 2 hitch is made to be a custom hitch for certain years of the Buick LaCrosse, Buick Regal, Cadillac XTS, Chevy Impala, Chevy Malibu and Chevy Malibu Limited (to verify vehicle compatibility, see application info). It offers a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. Class 2 trailer hitches can typically be used to tow a variety of lightweight trailers, such as a small utility trailer, small fishing boat trailer or popup camper (NOTE: Never exceed the lowest weight capacity of any towing component). They are also perfect for adding cargo space to your vehicle with a bike rack or cargo carrier. This class 2 hitch features a 1-1/4 in. receiver tube to accept a ball mount shank or other hitch-mounted accessory. For safety, it is tested in accordance with SAE J684. A custom trailer hitch design requires extra care, and as such, CURT class 2 hitches are engineered using real vehicles and hands-on research. We use high-strength steel, robotic welding and rigorous testing to produce hitches that are built to fit your lifestyle. To ensure that each hitch will be a reliable extension of your vehicle, we also finish our hitches in a co-curing of liquid Bonderite and black powder coat, giving them long-lasting rust and wear resistance.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2014 - Chevrolet Malibu | L | 2457 | Rear | 4 Cyl 2.5L | 153 |
- Custom Wiring Harness; 4-Way Flat Output; Select Chevrolet Malibu
- 3-Wire System; 4 Way Flat; Tail Light Circuit 7.5 Amps; Turn And Brake Circuits 7.5 Amps Install Time 45 Minutes
- CURT 56176 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Chevrolet Malibu
- Custom Wiring Harness
- Product Attributes:
- Output Type: 4-way Flat
- Electrical System Type: 3w
- Install Time: 45 Minutes
- Turn and Brake Circuits: 7.5 Amp
- Tail Light Circuits: 7.5 Amp
-
Features:
- Plugs Into Tail Light Assembly To Provide A 4-Way Flat Socket
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Equipped w/A Powered 3-Wire To 2-Wire Tail Light Converter
- Constructed w/Smt Circuitry For Better Performance And Durability
- Dust Cover Included To Keep Connector Clean When Not In Use
- Backed By A Limited One-Year Warranty
- Made In USA
- If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Chevy Malibu (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe its the boat landing at your favorite fishing spot, maybe its a campsite that overlooks one of natures masterpieces, or maybe its the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2014 - Chevrolet Malibu | Eco |
- Mini Two-Fuse Bypass Switch
- Mini; For RV Dinghy Towing
- CURT 58455 Mini Two-Fuse Bypass Switch for RV Dinghy Towing
- Two-Fuse Bypass Switch
-
Features:
- Helps Avoid Having To Remove And Replace Fuses When Flat Towing
- Vehicle-Specific Application For A Custom Fit
- Integrates With Curt RV Harness (Sold Separately)
- Includes Bypass Harness Fuse Holder And Other Components
- Fuse Not Included
- 20 Amp Max
- One Year Warranty
- This mini two-fuse bypass switch helps avoid having to remove and replace fuses when flat towing your vehicle. It is designed for vehicle-specific application and integrates with CURT RV harnesses for a custom-fit solution. It includes a bypass harness, fuse holder and other components.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Chevrolet Malibu |
- Class 2 Hitch; 1-1/4in. Mount; Select LaCrosse; Regal; XTS; Impala; Malibu
- Includes Std Ball Mount/Pin/Clip; 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 25 Minutes
- CURT 121153 Class 2 Trailer Hitch with Ball Mount; 1-1/4-In Receiver; Fits Select Buick LaCrosse; Regal; Cadillac XTS; Chevy Impala; Malibu
- Class II 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- Body Shape: Square
- Install Time: 25 Minutes
- WC Tongue Weight: 350
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- 1 1/4 In. X 1 1/4 In. Ball Mount Features A 3/4 In. Hole
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- A CURT trailer hitch is the key to pursuing your passions, whether youre taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Buick LaCrosse, Buick Regal, Cadillac CTS, Chevrolet Impala and Chevrolet Malibu (see application info to verify fitment). It is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight. It is also equipped with 1-1/4 in. x 1-1/4 in. hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4 in. trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid Bonderite for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2014 - Chevrolet Malibu | L | 2457 | Rear | 4 Cyl 2.5L | 153 |
- Long-Lead Mini Fuse Bypass Switch
- Long-Lead; For RV Dinghy Towing
- CURT 58445 Long-Lead Mini Fuse Bypass Switch for RV Dinghy Towing
- Mini Fuse Bypass Switch
-
Features:
- Helps Avoid Having To Remove And Replace Fuses When Flat Towing
- Vehicle-Specific Application For A Custom Fit
- Integrates With Curt RV Harness (Sold Separately)
- Includes Bypass Harness/Fuse Holder And Other Components
- Fuse Not Included
- 20 Amp Max
- One-Year Warranty
- This long-lead mini fuse bypass switch helps avoid having to remove and replace fuses when flat towing your vehicle. It is designed for vehicle-specific application and integrates with CURT RV harnesses for a custom-fit solution. It includes a bypass harness, fuse holder and other components.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Chevrolet Malibu |
- Custom Towed-Vehicle RV Wiring Harness; Select Chevrolet Malibu
- Connects Towed Vehicle To RV Using A Standard 4-Way Flat Trailer Plug
- CURT 58934 Custom Towed-Vehicle RV Wiring Harness for Dinghy Towing; Fits Select Chevrolet Malibu
- Towed-Vehicle RV Harness
-
Features:
- Connects A Towed Vehicle To An Rv Using A Standard 4-Way Flat
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- Diodes Isolate Sensitive Vehicle Electronics From RV Signal
- Uses VehicleS Existing Taillights
- Brake Lights And Turn Signals
- Towing your vehicle behind your RV is a great way to experience more of the adventure on your cross-country excursions. Whether youre towing a compact car or a full-size truck, CURT has the perfect solution to help you Bring It! CURT towed-vehicle RV harnesses are a vehicle-specific, plug-and-play solution to wiring your vehicle for dinghy towing. They use original-equipment-compatible connectors to plug into your vehicles wiring system without any cutting, splicing or soldering required. They provide a standard 4-way flat connector to plug into the RV socket and synchronize the vehicles tail lights, turn signals and brake lights with the RVs. Because each towed-vehicle RV harness has a vehicle-specific design, installation is fast and easy. This particular RV dinghy towing wiring harness is designed for specific years of the Chevrolet Malibu. CURT RV harnesses are also built to provide long-lasting operation. They feature integrated block diodes that protect the vehicles circuits from the RV signals. They isolate the sensitive vehicle electronics, keeping them from overheating and short circuiting. Every CURT towed-vehicle RV harness comes ready to install with all necessary hardware included. They also come with a 4-way flat extension to provide plenty of length to plug into the RV socket, as well as a connector mounting bracket to mount the connector on the vehicle.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2014 - Chevrolet Malibu | Eco |
Showing 1 - 7 of 7 products
Loading...