Shop By Product Matching "CURT"
Choose your Submodel for your 2016 Volkswagen Jetta
Image
Product
Price
- 4 Way Flat Output; Converts 2-Wire/3-Wire/PWM ST System To 2-Wire Trailer Light Wiring; Req. Powered Converter Wiring Kit PN[55152] or Similar
- CURT 56236 Multi-Function Splice-in Tail Light Converter; 4-Pin Wiring Harness
- Multi-Function Taillight Converter
- Product Attributes:
- Output Type: 4-way Flat
-
Features:
- Converts 2-Wire 3-Wire Or Pwm St System To 2-Wire Trailer Light
- Enclosure Significantly Increases Water And Vibration Resistance
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Constructed w/Smt Circuitry For Better Performance And Durability
- Microcontroller Senses Current To Rapidly React To Overload
- Provides Improved Overload Short-Circuit And Thermal Protection
- Low-Voltage Operation Allows Function Down To Seven Volts
- Color-Coded Wires w/Wiring Guide For Easier Installation
- Dust Cover Included To Keep Connector Clean When Not In Use
- Made In USA
- Rain, road grime and salt can deal a vicious blow to your trailer wiring, and it takes electrical components with an extra-thick shell to stand up to the elements. The CURT multi-function electrical converter is an advanced taillight converter that offers the ultimate in vehicle compatibility and weather resistance, giving you a reliable wiring connection any season of the year. The potted design seals the internal electrical components in a watertight enclosure and is filled with a solid compound to protect against impacts, vibrations and moisture for long-lasting use, even on the exterior of the vehicle. The converter also features our advanced surface mount technology (SMT), using smaller components mounted directly to the surface of the circuit board. This produces lower resistance, reduced heat generation, longer life cycles and higher reliability. The CURT multi-function electrical converter comes with pigtail wires that are able to be spliced into two-wire, three-wire or PWM wiring system with combined stop and taillights. It converts any of these systems to a simple two-wire system, using a standard 4-way flat output, to be compatible with most trailer wiring. The converter is controlled using a microcontroller that is able to sense the current passing through it, allowing for quick reaction to dangerous conditions such as overload and short circuits. It also filters unwanted input signals to protect your wiring systems and uses a mere seven volts for low-voltage operation. The CURT multi-function taillight converter is a heavy-duty electrical converter for virtually any vehicle-trailer combination. It comes with color-coded wires and an easy-to-read wiring guide, as well as a dust cover to protect the 4-way flat connector. This package also includes four snap locks for faster, more secure splicing. A powered converter wiring kit #55152 is also required for installation.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2016 - Volkswagen Jetta | GLI |
- Class 1 Trailer Hitch; 1-1/4in. Receiver; Select Volkswagen Golf; Jetta
- 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Round Main Body~Underbody Panel Trimming May Be Required~No Drilling Required~Visibility: Exposed~Install Time 45 Minutes~Temporarily Lower Exhaust For Installation~Temporarily Remove Underbody Panel For Installation
- CURT 11474 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Volkswagen Golf; Jetta
- Class I 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 2000
- Install Time: 45 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
-
Features:
- Made With A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance With Sea J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Bonderite Coating Inside And Out
- Strengthened With A Cast
- Welded
- Seamless Collar
- Equipped With An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Volkswagen Golf and Jetta (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Volkswagen Jetta | L | 1395 | Rear | 4 Cyl 1.4L | 85 |
- Powered 3-to-2-Wire Taillight Converters (30-Pack)
- Protected; Powered; 4 Way Output; Tail Light Circuit 6.0 ; Turn And Brake Circuit 3.0; Req. PN[55151] Converter Or Similar; Bulk 30 Pack
- CURT 56146030 Powered 3-to-2-Wire Splice-in Trailer Tail Light Converter; 4-Pin Wiring Harnesses; 30-Pack
- Powered 3-To-2-Wire Taillight Converter
- Product Attributes:
- Output Type: 4-way Flat
- Turn and Brake Circuits: 3.0 Amp
- Tail Light Circuits: 6.0 Amp
-
Features:
- Converts 3-Wire Vehicle System To Standard 2-Wire Trailer Wiring
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Constructed w/Smt Circuitry For Better Performance/Durability
- Color-Coded Wires For Easier Installation
- Snap Locks Included For Fast Secure Splicing
- No Heavy-Duty Flasher Required
- Dust Cover Included To Keep Connector Clean When Not In Use
- Made In USA
- When your vehicle does not readily provide an electrical connection for hooking up your trailer, CURT electrical converts offer the solution. Working tail lights on your trailer are absolutely essential any time you tow, and a converter provides an effective way to properly equip your vehicle for safe towing. A CURT electrical converter, much like our custom vehicle-to-trailer wiring harnesses, provides a trailer connector on your vehicle by slicing into the vehicles electrical system. Electrical converters are designed to splice directly into the taillight wiring, rather than plugging into various sockets, giving them the nickname "taillight converters". Though it requires a little extra work compared to a custom wiring harness, a tail light converter offers a reliable, long-term connector solution.This package contains 30 converters. These CURT electrical converters are designed to convert a 3-wire system to a 2-wire system and provide a standard 4-way flat connector socket to plug in your trailer. They are made with cutting-edge surface-mount technology (SMT) circuitry, featuring electrical components that are mounted directly to the surface of the board rather than being inserted into a series of holes. SMT circuits have longer life cycles, lower resistance, reduced heat generation and are more reliable than through-hole-mounted components.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2016 - Volkswagen Jetta | GLI Autobahn |
- Class 1 Trailer Hitch; 1-1/4in. Ball Mount; Select Volkswagen Golf; Jetta
- Includes Std Ball Mount/Pin/Clip; 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Round Main Body~Underbody Panel Trimming May Be Required~No Drilling Required~Visibility: Exposed~Install Time 45 Minutes~Temporarily Lower Exhaust For Installation~Temporarily Remove Underbody Panel For Installation
- CURT 114743 Class 1 Trailer Hitch with Ball Mount; 1-1/4-In Receiver; Fits Select Volkswagen Golf; Jetta
- Class I 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 2000
- Install Time: 45 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
-
Features:
- Made With A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance With Sea J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened With A Cast
- Welded
- Seamless Collar
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Volkswagen Golf and Jetta (see application info to verify fitment). The hitch integrates with the vehicles frame and provides a useful and dependable 1-1/4 in. x 1-1/4 in. receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4 in. trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid Bonderite for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where youre headed or which season of the year you're towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Volkswagen Jetta | L | 1395 | Rear | 4 Cyl 1.4L | 85 |
Showing 1 - 4 of 4 products
Loading...